Branch: refs/heads/master Home: https://github.com/bluez/bluez Commit: 7c49568a27580674e14f682fa0f6a7d555f8468c https://github.com/bluez/bluez/commit/7c49568a27580674e14f682fa0f6a7d555f8468c Author: Iulia Tanasescu <iulia.tanasescu@xxxxxxx> Date: 2024-02-13 (Tue, 13 Feb 2024) Changed paths: M emulator/btdev.c Log Message: ----------- btdev: Fix set PA data array overflow This fixes an array overflow that can happen if the user issues the LE Set Periodic Advertising Data command with data length exceeding 31 bytes. The PA data set by the user is copied in an array of fixed length (31 bytes). However, the data length might exceed 31 bytes. This will cause an array overflow when the PA data is later processed (for instance, when sending PA reports). According to specification, the data length provided at LE Set Periodic Advertising Data command can be maximum 252 bytes. The stored data len should also be true to the length copied in the array. Commit: 24d97e35fcde16ab988699dd1516d992053c50ac https://github.com/bluez/bluez/commit/24d97e35fcde16ab988699dd1516d992053c50ac Author: Ajay KV <ajay.k.v@xxxxxxxxx> Date: 2024-02-13 (Tue, 13 Feb 2024) Changed paths: M lib/uuid.h Log Message: ----------- lib/uuid: Add GTBS UUIDs for Call Control Profile Commit: 93d88ecd0714fc32b62109904b5ac7eff1b9aa26 https://github.com/bluez/bluez/commit/93d88ecd0714fc32b62109904b5ac7eff1b9aa26 Author: Ajay KV <ajay.k.v@xxxxxxxxx> Date: 2024-02-13 (Tue, 13 Feb 2024) Changed paths: M lib/uuid.c M lib/uuid.h Log Message: ----------- lib/uuid: Add support to compare 16bit uuids Commit: 5c89c54d2db1676f160d3085ab035265da7ef5be https://github.com/bluez/bluez/commit/5c89c54d2db1676f160d3085ab035265da7ef5be Author: Ajay KV <ajay.k.v@xxxxxxxxx> Date: 2024-02-13 (Tue, 13 Feb 2024) Changed paths: M Makefile.am A src/shared/ccp.c A src/shared/ccp.h Log Message: ----------- shared/ccp: Add initial code for Call Control Profile for Client Role Commit: b097bf6d302e045143902154a7aae1bf8dcfac4c https://github.com/bluez/bluez/commit/b097bf6d302e045143902154a7aae1bf8dcfac4c Author: Shahid Vichhi <shahid.bashir.vichhi@xxxxxxxxx> Date: 2024-02-13 (Tue, 13 Feb 2024) Changed paths: M monitor/att.c Log Message: ----------- monitor/att: Enable the notification logging support for the CCP Commit: 094f3fdcc0ac57c9feee8a1a3f458ab27f5f593f https://github.com/bluez/bluez/commit/094f3fdcc0ac57c9feee8a1a3f458ab27f5f593f Author: Szymon Janc <szymon.janc@xxxxxxxxxxx> Date: 2024-02-14 (Wed, 14 Feb 2024) Changed paths: M configure.ac Log Message: ----------- build: Fix typo in external-plugins configure option This was causing build errors as macros were also generated with typo. Commit: b55d98e5cc97e4ff8c3980b84f46c84f3b1c1ee3 https://github.com/bluez/bluez/commit/b55d98e5cc97e4ff8c3980b84f46c84f3b1c1ee3 Author: Szymon Janc <szymon.janc@xxxxxxxxxxx> Date: 2024-02-14 (Wed, 14 Feb 2024) Changed paths: M bootstrap-configure Log Message: ----------- bootstrap-configure: Enable external plugins Make sure we build this code while in development mode. Commit: 247ae8524888268bb075ff90a3d77a9b4449d08f https://github.com/bluez/bluez/commit/247ae8524888268bb075ff90a3d77a9b4449d08f Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2024-02-14 (Wed, 14 Feb 2024) Changed paths: M profiles/input/hog-lib.c Log Message: ----------- hog-lib: Don't destroy UHID device on detach This makes bt_hog_detach not to destroy UHID device which means the device node don't need to be recreated in case of reconnections which speeds up the process. Fixes: https://github.com/bluez/bluez/issues/737 Commit: 9698870015b0972d3d93f30a6d9de1ed029ba87c https://github.com/bluez/bluez/commit/9698870015b0972d3d93f30a6d9de1ed029ba87c Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2024-02-14 (Wed, 14 Feb 2024) Changed paths: M profiles/input/device.c M profiles/input/input.conf Log Message: ----------- input.conf: Make UserspaceHID defaults to true This makes UserspaceHID defaults to true so the plugin has more control over the input device lifetime. Commit: ee880bee85864b0e691370197c9de8d2f7ba0af2 https://github.com/bluez/bluez/commit/ee880bee85864b0e691370197c9de8d2f7ba0af2 Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2024-02-14 (Wed, 14 Feb 2024) Changed paths: M profiles/input/device.c Log Message: ----------- input/device: Don't destroy UHID device on disconnect This makes classic HID behave like HoG which keeps the UHID device around while disconnected so it doesn't have to be recreated on every reconnection. Commit: f3c35ed835bda18573e07d02f725be5106ad8ae8 https://github.com/bluez/bluez/commit/f3c35ed835bda18573e07d02f725be5106ad8ae8 Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2024-02-15 (Thu, 15 Feb 2024) Changed paths: M emulator/btdev.c Log Message: ----------- btdev: Fix crash on page_timeout If remote device cannot be found after page_timeout then the code shall not proceed to call pending_conn_del. Commit: fb339bde646ca9717f0787aefd6f6cbe4fb13f78 https://github.com/bluez/bluez/commit/fb339bde646ca9717f0787aefd6f6cbe4fb13f78 Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2024-02-15 (Thu, 15 Feb 2024) Changed paths: M tools/rfcomm-tester.c Log Message: ----------- rfcomm-tester: Fix crash on test-basic This fixes to following trace caused by not initializing data->io: AddressSanitizer:DEADLYSIGNAL ================================================================= ERROR: AddressSanitizer: SEGV on unknown address (pc 0x7f199c3a01c9 bp 0x7ffc26624a10 sp 0x7ffc26624a00 T0) The signal is caused by a READ memory access. Hint: this fault was caused by a dereference of a high value address (see register values below). Disassemble the provided pc to learn . #0 0x7f199c3a01c9 in g_io_channel_unref (/lib64/libglib-2.0.so.0+0x4d1c9) #1 0x5565f82fcece in test_post_teardown tools/rfcomm-tester.c:205 #2 0x5565f83939b3 in teardown_callback src/shared/tester.c:434 Commit: 055a83c84761705be4295c3fabb6b9038945bf39 https://github.com/bluez/bluez/commit/055a83c84761705be4295c3fabb6b9038945bf39 Author: Silviu Florian Barbulescu <silviu.barbulescu@xxxxxxx> Date: 2024-02-15 (Thu, 15 Feb 2024) Changed paths: M src/shared/bap.c Log Message: ----------- shared/bap: Fix wrong value used when extracting LTVs Fix wrong value used when extracting LTVs when generating BASE Commit: c58a4d9f7880931a14c4733c013c08c477aefeec https://github.com/bluez/bluez/commit/c58a4d9f7880931a14c4733c013c08c477aefeec Author: Arkadiusz Bokowy <arkadiusz.bokowy@xxxxxxxxx> Date: 2024-02-15 (Thu, 15 Feb 2024) Changed paths: M src/advertising.c Log Message: ----------- advertising: Do not set timer if DiscoverableTimeout=0 According to org.bluez.LEAdvertisement.rst documentation, the value of zero should disable timeout and keep device in the discoverable mode forever. Commit: 854dcb7c2bbd8d11f1188838090d6eba3476dc85 https://github.com/bluez/bluez/commit/854dcb7c2bbd8d11f1188838090d6eba3476dc85 Author: Matthias Schiffer <matthias.schiffer@xxxxxxxxxxxxxxx> Date: 2024-02-16 (Fri, 16 Feb 2024) Changed paths: M tools/rfcomm.c Log Message: ----------- tools/rfcomm: reset ignored signals after fork rfcomm sets SIGCHLD and SIGPIPE to SIG_IGN, which is inherited by child processes and preserved across execvp(). Many applications do not expect these signals to be ignored, causing all kinds of breakage (including the standard C system() function misbehaving on glibc and probably other libcs because waitpid() does not work when SIGCHLD is ignored). Commit: f79ccf6c429ed28e5aac8c68ed818aa2d7d5351d https://github.com/bluez/bluez/commit/f79ccf6c429ed28e5aac8c68ed818aa2d7d5351d Author: Matthias Schiffer <matthias.schiffer@xxxxxxxxxxxxxxx> Date: 2024-02-16 (Fri, 16 Feb 2024) Changed paths: M tools/rfcomm.c Log Message: ----------- tools/rfcomm: _exit() on execvp() failure When the exec fails, the child process must be terminated instead of continuing as a second main process. Commit: 9fe4ccb79ffa0faa3084ce1be12685585d68e85e https://github.com/bluez/bluez/commit/9fe4ccb79ffa0faa3084ce1be12685585d68e85e Author: Emil Velikov <emil.l.velikov@xxxxxxxxx> Date: 2024-02-20 (Tue, 20 Feb 2024) Changed paths: M Makefile.am M Makefile.obexd Log Message: ----------- build: rework {install-data,uninstall}-hook Currently autoconfigure throws a useful error, about a duplicate install-data-hook. Address that by making the two target specific and pulling them as dependencies. We have to create empty ones otherwise dependency tracking and resolution will fail. Commit: c2b9f357d52207ef22c9a4880cc0b5c7e8f11c5b https://github.com/bluez/bluez/commit/c2b9f357d52207ef22c9a4880cc0b5c7e8f11c5b Author: Emil Velikov <emil.l.velikov@xxxxxxxxx> Date: 2024-02-20 (Tue, 20 Feb 2024) Changed paths: M Makefile.obexd Log Message: ----------- build: install obexd (dbus,systemd} services as needed Currently we ship the service files, even when built with --disable-obex. Move the "if OBEX" guard few lines further up. Commit: 71d8fda25b2176a5e6b288c868195bc57aaaf9f8 https://github.com/bluez/bluez/commit/71d8fda25b2176a5e6b288c868195bc57aaaf9f8 Author: Emil Velikov <emil.l.velikov@xxxxxxxxx> Date: 2024-02-20 (Tue, 20 Feb 2024) Changed paths: M Makefile.am M configure.ac M mesh/bluetooth-mesh.service.in M obexd/src/obex.service.in M obexd/src/org.bluez.obex.service.in M src/bluetooth.service.in M tools/bluetooth-logger.service.in Log Message: ----------- build: handle relative libexecdir instances With earlier commit, we've used exec_dir to reference the path of obexd and bluetoothd within the service files. At the same time, in my testing I was providing the complete path on the configure command line. As result, things just worked. In the default case, the variable contains relative references to ${} variables, which as result end up literal in the services. Ultimately the service files were broken. Document are reuse the existing pattern of manually expanding the variables. Fixes: https://github.com/bluez/bluez/issues/736 Commit: 344cf10cb60c2031200be1c6618a0f2b7e2b8950 https://github.com/bluez/bluez/commit/344cf10cb60c2031200be1c6618a0f2b7e2b8950 Author: Emil Velikov <emil.l.velikov@xxxxxxxxx> Date: 2024-02-20 (Tue, 20 Feb 2024) Changed paths: M Makefile.am Log Message: ----------- build: simplify coverage handling Commit: bade07f43fedb221caf217bf2a98a4050292a32e https://github.com/bluez/bluez/commit/bade07f43fedb221caf217bf2a98a4050292a32e Author: Emil Velikov <emil.l.velikov@xxxxxxxxx> Date: 2024-02-20 (Tue, 20 Feb 2024) Changed paths: M Makefile.obexd Log Message: ----------- build: drop explicit -fPIC from obexd CFLAGS The option is handled by the global --enable-pic. Drop the local explicit argument. With that we can drop the standalone CFLAGS. Commit: 071ababfe6e340c17642889ec02083db84fa12a1 https://github.com/bluez/bluez/commit/071ababfe6e340c17642889ec02083db84fa12a1 Author: Emil Velikov <emil.l.velikov@xxxxxxxxx> Date: 2024-02-20 (Tue, 20 Feb 2024) Changed paths: M .gitignore Log Message: ----------- gitignore: add org.bluez.obex.service Commit: 4d3605e472ed490ec43142580a511b3f44b29e70 https://github.com/bluez/bluez/commit/4d3605e472ed490ec43142580a511b3f44b29e70 Author: Emil Velikov <emil.l.velikov@xxxxxxxxx> Date: 2024-02-20 (Tue, 20 Feb 2024) Changed paths: M Makefile.obexd Log Message: ----------- build: obexd: remove duplicate include -I$(builddir)/lib The -I$(builddir)/lib include is already in the AM_CPPFLAGS. Drop the duplicate instance in obexd. Commit: e6acec4770bb60de22b133d4e1ba554951b7b288 https://github.com/bluez/bluez/commit/e6acec4770bb60de22b133d4e1ba554951b7b288 Author: Emil Velikov <emil.l.velikov@xxxxxxxxx> Date: 2024-02-20 (Tue, 20 Feb 2024) Changed paths: M .gitignore Log Message: ----------- gitignore: ignore all manual pages Drop the few explicit entries and use *.{1,5,8} instead. Commit: c5f1c5ba0e8d629487f610b60fc93d433d6f5614 https://github.com/bluez/bluez/commit/c5f1c5ba0e8d629487f610b60fc93d433d6f5614 Author: Silviu Florian Barbulescu <silviu.barbulescu@xxxxxxx> Date: 2024-02-20 (Tue, 20 Feb 2024) Changed paths: M profiles/audio/bap.c Log Message: ----------- bap: Remove set lpac user data at bcast ep register Remove set lpac user data at bcast ep register Commit: 5629f4784a4dfb1a3c708aca252f6f9319286807 https://github.com/bluez/bluez/commit/5629f4784a4dfb1a3c708aca252f6f9319286807 Author: Silviu Florian Barbulescu <silviu.barbulescu@xxxxxxx> Date: 2024-02-20 (Tue, 20 Feb 2024) Changed paths: M profiles/audio/bap.c Log Message: ----------- bap: Split bap_state and bap_connecting in two functions Split bap_state and bap_connecting in two specific functions for unicast (bap_state, bap_connecting) and broadcast (bap_state_bcast, bap_connecting_bcast). Commit: a16c2ccf9c256285188f4549b7b767cf31b100eb https://github.com/bluez/bluez/commit/a16c2ccf9c256285188f4549b7b767cf31b100eb Author: Silviu Florian Barbulescu <silviu.barbulescu@xxxxxxx> Date: 2024-02-20 (Tue, 20 Feb 2024) Changed paths: M src/shared/bap.c Log Message: ----------- shared/bap: Generate one BIS BASE for Generate single BIS BASE for a config with BIG ID 0xFF Commit: 8f262a27bdf233f142a7bb22bf3f8c6db53debee https://github.com/bluez/bluez/commit/8f262a27bdf233f142a7bb22bf3f8c6db53debee Author: Silviu Florian Barbulescu <silviu.barbulescu@xxxxxxx> Date: 2024-02-23 (Fri, 23 Feb 2024) Changed paths: M src/shared/bap.c Log Message: ----------- shared/bap: Fix crash unreg bcast src endpoint In bt_bap_stream_release stream is accessed after free Commit: c8af669da59b264624a9c874f02e41b4a78da5e4 https://github.com/bluez/bluez/commit/c8af669da59b264624a9c874f02e41b4a78da5e4 Author: Shahid Vichhi <shahid.bashir.vichhi@xxxxxxxxx> Date: 2024-02-23 (Fri, 23 Feb 2024) Changed paths: M Makefile.plugins M configure.ac A profiles/audio/ccp.c Log Message: ----------- profiles/audio/ccp: Add CCP plugin for call control profile This adds initial code for CCP plugin which handle CALL CONTROL PROFILE for Telephone Bearer Services and Generic Telephone Bearer Services in the client role. This has been tested using teams application by initiating call between Linux BTOE and Windows server with LE audio enabled. Commit: f65cd924f2e60e7bd41dc27443c020e131880e8c https://github.com/bluez/bluez/commit/f65cd924f2e60e7bd41dc27443c020e131880e8c Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2024-02-26 (Mon, 26 Feb 2024) Changed paths: M emulator/btdev.c Log Message: ----------- btdev: Fix UAF on page_timeout When the page_timeout is run perhaps the btdev had been freed already so it needs to be checked if it still valid. Commit: c01c40498cfb770d4282f31edd9d75bb53646efa https://github.com/bluez/bluez/commit/c01c40498cfb770d4282f31edd9d75bb53646efa Author: Archie Pusaka <apusaka@xxxxxxxxxxxx> Date: 2024-02-26 (Mon, 26 Feb 2024) Changed paths: M src/advertising.c Log Message: ----------- advertising: Fix assigning mgmt callback id when adding advertisement A struct member add_adv_id is used to track whether the adv client is still needed for some mgmt callback. This is checked when freeing the client to avoid UAF. We currently only set this member if we have a callback after calling mgmt_send. In case of extended advertisement, this is always a two-step process: first to set the params, then the data. It is possible for the client to be freed when we are pending on setting the params, and if we don't set the add_adv_id (because we have no callback for setting the data), the client on the 2nd step of the process will be invalid, leading to UAF scenario. This patch always sets the add_adv_id member on the 1st step of adding an extended advertisement, and adjust the value accordingly on the 2nd step. Additionally, this patch drops the 3rd parameter of the function refresh_advertisement since it can always be derived from the 1st and 2nd parameter. Reviewed-by: Hsin-chen Chuang <chharry@xxxxxxxxxx> Commit: 15032315f35c44820952a9750baf58c2b4090b3f https://github.com/bluez/bluez/commit/15032315f35c44820952a9750baf58c2b4090b3f Author: Joakim Tjernlund <joakim.tjernlund@xxxxxxxxxxxx> Date: 2024-02-26 (Mon, 26 Feb 2024) Changed paths: M Makefile.tools M configure.ac Log Message: ----------- cups: Use pkg-config to find cups backend dir Some distributions(Gentoo) patch cups backend path to something else than libdir. Use pkg-config to find backend path for cups. Commit: 8552e06b6617a1c51558d549aab66c500c6c50c2 https://github.com/bluez/bluez/commit/8552e06b6617a1c51558d549aab66c500c6c50c2 Author: Silviu Florian Barbulescu <silviu.barbulescu@xxxxxxx> Date: 2024-02-27 (Tue, 27 Feb 2024) Changed paths: M src/shared/bap.c Log Message: ----------- shared/bap: Fix endpoint dir for the bcast source Fix endpoint direction for the broadcast source Commit: b4f9a9fd7ed22a8da8a2d05e0bc35a8c6b421190 https://github.com/bluez/bluez/commit/b4f9a9fd7ed22a8da8a2d05e0bc35a8c6b421190 Author: Silviu Florian Barbulescu <silviu.barbulescu@xxxxxxx> Date: 2024-02-27 (Tue, 27 Feb 2024) Changed paths: M src/shared/bap.c Log Message: ----------- shared/bap: Add state in stream struct for bcast source Add state support in the stream struct for broadcast source. Commit: 6ea7f481094c9cad528dd1f7c50a45f177288060 https://github.com/bluez/bluez/commit/6ea7f481094c9cad528dd1f7c50a45f177288060 Author: Silviu Florian Barbulescu <silviu.barbulescu@xxxxxxx> Date: 2024-02-27 (Tue, 27 Feb 2024) Changed paths: M src/shared/bap.c M src/shared/bap.h Log Message: ----------- shared/bap: Add support to create a stream for bcast src Split bt_bap_stream_new and two specific functions for unicast and broadcast. Add a function to find an remote endpoint for broadcast source. Commit: dd57562760e4e784d278b63877a3d6265c638854 https://github.com/bluez/bluez/commit/dd57562760e4e784d278b63877a3d6265c638854 Author: Silviu Florian Barbulescu <silviu.barbulescu@xxxxxxx> Date: 2024-02-27 (Tue, 27 Feb 2024) Changed paths: M profiles/audio/bap.c Log Message: ----------- bap: Add a callback to create a new stream Add a callback to create a new stream Commit: 92f3ed1879042b43033241049b334404229df88d https://github.com/bluez/bluez/commit/92f3ed1879042b43033241049b334404229df88d Author: Silviu Florian Barbulescu <silviu.barbulescu@xxxxxxx> Date: 2024-02-27 (Tue, 27 Feb 2024) Changed paths: M profiles/audio/bap.c Log Message: ----------- bap: Set generated BASE on all setups from the same BIG Set the BASE generated in BlueZ on all setups from the same BIG, and use defer to inform the kernel when to create the BIG. Commit: ade2b97597e13ead02293e235aa5fa93f1afa043 https://github.com/bluez/bluez/commit/ade2b97597e13ead02293e235aa5fa93f1afa043 Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2024-02-27 (Tue, 27 Feb 2024) Changed paths: M emulator/btdev.c Log Message: ----------- btdev: Fix not resetting big_handle on HCI_Reset HCI_Reset shall cleanup BIG state including if the handle has been set. Commit: 44d3f67277f83983e1e9697eda7b9aeb40ca231d https://github.com/bluez/bluez/commit/44d3f67277f83983e1e9697eda7b9aeb40ca231d Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2024-02-27 (Tue, 27 Feb 2024) Changed paths: M src/device.c Log Message: ----------- device: Consider service state on device_is_connected This checks if there is any service connected on device_is_connected since some profiles maybe probed using advertising data which doesn't require a connection. Commit: 3f7d81e906e09e881ca2d3f024230cae3a27ba64 https://github.com/bluez/bluez/commit/3f7d81e906e09e881ca2d3f024230cae3a27ba64 Author: Andrei Istodorescu <andrei.istodorescu@xxxxxxx> Date: 2024-03-01 (Fri, 01 Mar 2024) Changed paths: M src/shared/util.c M src/shared/util.h Log Message: ----------- shared/util: Add push LTV utilitary function Commit: 7ec9a0f77c6e8601ac4fcc5bdfa8f1aaf1aa1c44 https://github.com/bluez/bluez/commit/7ec9a0f77c6e8601ac4fcc5bdfa8f1aaf1aa1c44 Author: Andrei Istodorescu <andrei.istodorescu@xxxxxxx> Date: 2024-03-01 (Fri, 01 Mar 2024) Changed paths: M src/shared/bap.c M src/shared/bap.h Log Message: ----------- shared/bap: Allow reading endpoint metadata and data Add utilitary functions to get endpoint metadata and data. Commit: 98aba4aaef7a574bde7363e50888527a21a0b546 https://github.com/bluez/bluez/commit/98aba4aaef7a574bde7363e50888527a21a0b546 Author: Andrei Istodorescu <andrei.istodorescu@xxxxxxx> Date: 2024-03-01 (Fri, 01 Mar 2024) Changed paths: M src/shared/bap.c Log Message: ----------- shared/bap: Update local PACS for broadcast sink also Commit: 2ec513fc37d7ccc1143d3805b2e1e99d627f9bf5 https://github.com/bluez/bluez/commit/2ec513fc37d7ccc1143d3805b2e1e99d627f9bf5 Author: Andrei Istodorescu <andrei.istodorescu@xxxxxxx> Date: 2024-03-01 (Fri, 01 Mar 2024) Changed paths: M src/shared/bap.c Log Message: ----------- shared/bap: Do stream configuration in bap_bcast_config Stream configuration for BAP broadcast streams should be done inside bap_bcast_config and not when setting the user data. Commit: d2fa46e08c3bf06d1078e84aa66b2f510ea1a900 https://github.com/bluez/bluez/commit/d2fa46e08c3bf06d1078e84aa66b2f510ea1a900 Author: Andrei Istodorescu <andrei.istodorescu@xxxxxxx> Date: 2024-03-01 (Fri, 01 Mar 2024) Changed paths: M src/shared/bap.c M src/shared/bap.h Log Message: ----------- shared/bap: Add API to add an observed BIS Add API to add a PAC for each observed BIS that is supported by the local PACS data. Each BIS observed capabilities LTV is compared to the local capabilities and when we have a full LTVs match a PAC record is created for that BIS. Also a MediaEndpoint is registered over DBUS and the stream can be enabled using the SetConfiguration DBUS call. Commit: 29fe7bd07fbd1311f3c256721c8c613157ae1e8d https://github.com/bluez/bluez/commit/29fe7bd07fbd1311f3c256721c8c613157ae1e8d Author: Andrei Istodorescu <andrei.istodorescu@xxxxxxx> Date: 2024-03-01 (Fri, 01 Mar 2024) Changed paths: M profiles/audio/bap.c Log Message: ----------- bap: Do PA Sync for each BAP Broadcast source discovered After discovering a BAP Broadcast Source do a short PA sync first to learn the BASE. After discovering the BASE check how many BISes are matching the sink capabilities and create endpoints for them. Allow user to configure one endpoint using "SetConfiguration" causing BIG synchronization to the corresponding BIS; also this results in creating a stream and the corresponding transport. Commit: 0d82dd205023b867818e0b73ef78cc3eba352799 https://github.com/bluez/bluez/commit/0d82dd205023b867818e0b73ef78cc3eba352799 Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2024-03-04 (Mon, 04 Mar 2024) Changed paths: M profiles/audio/bap.c M src/shared/bap.c M src/shared/bap.h Log Message: ----------- shared/bap: Remove bt_bap_stream_bcast_new This is now handled internally by bt_bap_stream_new by detecting if an ATT session has been attached. Commit: cb7375fb8a98776e6b33adb3507e4a23224cb5fc https://github.com/bluez/bluez/commit/cb7375fb8a98776e6b33adb3507e4a23224cb5fc Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2024-03-04 (Mon, 04 Mar 2024) Changed paths: M client/bluetoothctl.rst Log Message: ----------- client: Remove Pygments dependency from manpage This patch removes the Pygments dependency from btmon .rst file. When the code-block type is specified, the rst2man throws a warning asking for Pygments package. Commit: 9cc8b97b8f5d060e334207136100e947732aed08 https://github.com/bluez/bluez/commit/9cc8b97b8f5d060e334207136100e947732aed08 Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2024-03-04 (Mon, 04 Mar 2024) Changed paths: M Makefile.obexd Log Message: ----------- build: obexd: Fix make distcheck This fixes the following error: /usr/bin/install: cannot remove '/usr/share/dbus-1/services/org.bluez.obex.service': Permission denied Commit: d5a9195a6269e703c6e3a47c40982ec94d8cc838 https://github.com/bluez/bluez/commit/d5a9195a6269e703c6e3a47c40982ec94d8cc838 Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2024-03-04 (Mon, 04 Mar 2024) Changed paths: M Makefile.tools M configure.ac Log Message: ----------- build: Fix distcheck This fixes the following errors: /usr/bin/mkdir -p '/backend' /usr/bin/mkdir: cannot create directory ‘/backend’: Permission denied make[3]: *** [Makefile:4768: install-cupsPROGRAMS] Error 1 Commit: 71f0a1e88d9a55d5b4a0db007ab15e5dcb525a4c https://github.com/bluez/bluez/commit/71f0a1e88d9a55d5b4a0db007ab15e5dcb525a4c Author: Frédéric Danis <frederic.danis@xxxxxxxxxxxxx> Date: 2024-03-04 (Mon, 04 Mar 2024) Changed paths: M src/shared/gatt-server.c Log Message: ----------- gatt-server: Add support for signed write command GAP/SEC/CSIGN/BV-02-C request the ability to check that signed write has been performed successfully. Commit: 3eba64ba2c856347fe311d8c547914f225c497b6 https://github.com/bluez/bluez/commit/3eba64ba2c856347fe311d8c547914f225c497b6 Author: Frédéric Danis <frederic.danis@xxxxxxxxxxxxx> Date: 2024-03-04 (Mon, 04 Mar 2024) Changed paths: M src/adapter.c M src/device.c M src/device.h Log Message: ----------- device: Update local and remote CSRK on management event Currently the local and remote CSRK keys are only loaded to device object from storage during start. Those keys are updated on MGMT_EV_NEW_CSRK event only in adapter object, but saved both in adapter and device objects. Those keys should be updated on management event to be able to perform signed write for GAP/SEC/CSIGN/BV-01-C and GAP/SEC/CSIGN/BV-02-C. This commits updates the keys on management event in the device object and move their storage to device object only. Commit: 7665fb5d943c3910465123fc7b08922e44adb7a2 https://github.com/bluez/bluez/commit/7665fb5d943c3910465123fc7b08922e44adb7a2 Author: Max Gautier <mg@xxxxxxxxxxxxxxxx> Date: 2024-03-04 (Mon, 04 Mar 2024) Changed paths: M Makefile.am Log Message: ----------- Don't install conf and state dir on systemd The bluetooth.service file already specify the State and Configuration directories with the correct modes, which guarantee they will be available (with proper permissions) when bluetoohd starts. Not installing those helps implementing the "Hermetic /usr" pattern (TL;DR: '/usr' contains everything necessary to boostrap a working system) Handling this in upstream bluez (rather than in distribution packaging scripts) avoid duplication of efforts between distros. Links: https://0pointer.net/blog/fitting-everything-together.html Commit: 0bf9e6453ed5175dea94a8fc88c6b74f99999d30 https://github.com/bluez/bluez/commit/0bf9e6453ed5175dea94a8fc88c6b74f99999d30 Author: Andrei Istodorescu <andrei.istodorescu@xxxxxxx> Date: 2024-03-05 (Tue, 05 Mar 2024) Changed paths: M src/shared/shell.c Log Message: ----------- shared/shell: Fix heap use after free on exit Set the value for data.inputs and data.queue queues to NULL after freeing, so that further processes won't use already freed memory Commit: a070ceac6ba897ba64021d1f9963dbb4f1a1c203 https://github.com/bluez/bluez/commit/a070ceac6ba897ba64021d1f9963dbb4f1a1c203 Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2024-03-06 (Wed, 06 Mar 2024) Changed paths: M src/shared/lc3.h Log Message: ----------- shared/lc3: Add definitions for Audio Configurations This adds defines for Audio Configurations so it can be used for upcoming tests. Commit: 2da45fc7e2d65d31b8d90c0d94eef6c1374d53bd https://github.com/bluez/bluez/commit/2da45fc7e2d65d31b8d90c0d94eef6c1374d53bd Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2024-03-06 (Wed, 06 Mar 2024) Changed paths: M unit/test-bap.c Log Message: ----------- test-bap: Add STR sink tests 4.10.1 Unicast Client Streaming – 1 Unicast Server, 1 Stream, 1 CIS – LC3 (Page 80) Test Purpose: Verify that a Unicast Client IUT can stream audio data over one unicast Audio Stream to or from a Unicast Server. Pass verdict: If the IUT is in the Audio Sink role, the IUT receives SDUs with a zero or more length that contains LC3-encoded data formatted using the LC3 Media Packet format (defined in [3] Section 4.2). Test Summary ------------ BAP/UCL/STR/BV-001-C [UCL, AC 2, LC3 8_1_1] Passed BAP/UCL/STR/BV-002-C [UCL, AC 10, LC3 8_1_1] Passed BAP/UCL/STR/BV-003-C [UCL, AC 2, LC3 8_2_1] Passed BAP/UCL/STR/BV-004-C [UCL, AC 10, LC3 8_2_1] Passed BAP/UCL/STR/BV-005-C [UCL, AC 2, LC3 16_1_1] Passed BAP/UCL/STR/BV-006-C [UCL, AC 10, LC3 16_1_1] Passed BAP/UCL/STR/BV-007-C [UCL, AC 2, LC3 16_2_1] Passed BAP/UCL/STR/BV-008-C [UCL, AC 10, LC3 16_2_1] Passed BAP/UCL/STR/BV-009-C [UCL, AC 2, LC3 24_1_1] Passed BAP/UCL/STR/BV-010-C [UCL, AC 10, LC3 24_1_1] Passed BAP/UCL/STR/BV-011-C [UCL, AC 2, LC3 24_2_1] Passed BAP/UCL/STR/BV-012-C [UCL, AC 10, LC3 24_2_1] Passed BAP/UCL/STR/BV-013-C [UCL, AC 2, LC3 32_1_1] Passed BAP/UCL/STR/BV-014-C [UCL, AC 10, LC3 32_1_1] Passed BAP/UCL/STR/BV-015-C [UCL, AC 2, LC3 32_2_1] Passed BAP/UCL/STR/BV-016-C [UCL, AC 10, LC3 32_2_1] Passed BAP/UCL/STR/BV-017-C [UCL, AC 2, LC3 441_1_1] Passed BAP/UCL/STR/BV-018-C [UCL, AC 10, LC3 441_1_1] Passed BAP/UCL/STR/BV-019-C [UCL, AC 2, LC3 44_2_1] Passed BAP/UCL/STR/BV-020-C [UCL, AC 10, LC3 44_2_1] Passed BAP/UCL/STR/BV-021-C [UCL, AC 2, LC3 48_1_1] Passed BAP/UCL/STR/BV-022-C [UCL, AC 10, LC3 48_1_1] Passed BAP/UCL/STR/BV-023-C [UCL, AC 2, LC3 48_2_1] Passed BAP/UCL/STR/BV-024-C [UCL, AC 10, LC3 48_2_1] Passed BAP/UCL/STR/BV-025-C [UCL, AC 2, LC3 48_3_1] Passed BAP/UCL/STR/BV-026-C [UCL, AC 10, LC3 48_3_1] Passed BAP/UCL/STR/BV-027-C [UCL, AC 2, LC3 48_4_1] Passed BAP/UCL/STR/BV-028-C [UCL, AC 10, LC3 48_4_1] Passed BAP/UCL/STR/BV-029-C [UCL, AC 2, LC3 48_5_1] Passed BAP/UCL/STR/BV-030-C [UCL, AC 10, LC3 48_5_1] Passed BAP/UCL/STR/BV-031-C [UCL, AC 2, LC3 48_6_1] Passed BAP/UCL/STR/BV-032-C [UCL, AC 10, LC3 48_6_1] Passed BAP/UCL/STR/BV-033-C [UCL, SRC, AC 1, LC3 8_1_1] Passed BAP/UCL/STR/BV-034-C [UCL, SRC, AC 4, LC3 8_1_1] Passed BAP/UCL/STR/BV-035-C [UCL, SRC, AC 1, LC3 8_2_1] Passed BAP/UCL/STR/BV-036-C [UCL, SRC, AC 4, LC3 8_2_1] Passed BAP/UCL/STR/BV-037-C [UCL, SRC, AC 1, LC3 16_1_1] Passed BAP/UCL/STR/BV-038-C [UCL, SRC, AC 4, LC3 16_1_1] Passed BAP/UCL/STR/BV-039-C [UCL, SRC, AC 1, LC3 16_2_1] Passed BAP/UCL/STR/BV-040-C [UCL, SRC, AC 4, LC3 16_2_1] Passed BAP/UCL/STR/BV-041-C [UCL, SRC, AC 1, LC3 24_1_1] Passed BAP/UCL/STR/BV-042-C [UCL, SRC, AC 4, LC3 24_1_1] Passed BAP/UCL/STR/BV-043-C [UCL, SRC, AC 1, LC3 24_2_1] Passed BAP/UCL/STR/BV-044-C [UCL, SRC, AC 4, LC3 24_2_1] Passed BAP/UCL/STR/BV-045-C [UCL, SRC, AC 1, LC3 32_1_1] Passed BAP/UCL/STR/BV-046-C [UCL, SRC, AC 4, LC3 32_1_1] Passed BAP/UCL/STR/BV-047-C [UCL, SRC, AC 1, LC3 32_2_1] Passed BAP/UCL/STR/BV-048-C [UCL, SRC, AC 4, LC3 32_2_1] Passed BAP/UCL/STR/BV-049-C [UCL, SRC, AC 1, LC3 44_1_1] Passed BAP/UCL/STR/BV-050-C [UCL, SRC, AC 4, LC3 44_1_1] Passed BAP/UCL/STR/BV-051-C [UCL, SRC, AC 1, LC3 44_2_1] Passed BAP/UCL/STR/BV-052-C [UCL, SRC, AC 4, LC3 44_2_1] Passed BAP/UCL/STR/BV-053-C [UCL, SRC, AC 1, LC3 48_1_1] Passed BAP/UCL/STR/BV-054-C [UCL, SRC, AC 4, LC3 48_1_1] Passed BAP/UCL/STR/BV-055-C [UCL, SRC, AC 1, LC3 48_2_1] Passed BAP/UCL/STR/BV-056-C [UCL, SRC, AC 4, LC3 48_2_1] Passed BAP/UCL/STR/BV-057-C [UCL, SRC, AC 1, LC3 48_3_1] Passed BAP/UCL/STR/BV-058-C [UCL, SRC, AC 4, LC3 48_3_1] Passed BAP/UCL/STR/BV-059-C [UCL, SRC, AC 1, LC3 48_4_1] Passed BAP/UCL/STR/BV-060-C [UCL, SRC, AC 4, LC3 48_4_1] Passed BAP/UCL/STR/BV-061-C [UCL, SRC, AC 1, LC3 48_5_1] Passed BAP/UCL/STR/BV-062-C [UCL, SRC, AC 4, LC3 48_5_1] Passed BAP/UCL/STR/BV-063-C [UCL, SRC, AC 1, LC3 48_6_1] Passed BAP/UCL/STR/BV-064-C [UCL, SRC, AC 4, LC3 48_6_1] Passed BAP/UCL/STR/BV-065-C [UCL, AC 2, LC3 8_1_2] Passed BAP/UCL/STR/BV-066-C [UCL, AC 10, LC3 8_1_2] Passed BAP/UCL/STR/BV-067-C [UCL, AC 2, LC3 8_2_2] Passed BAP/UCL/STR/BV-068-C [UCL, AC 10, LC3 8_2_2] Passed BAP/UCL/STR/BV-069-C [UCL, AC 2, LC3 16_1_2] Passed BAP/UCL/STR/BV-070-C [UCL, AC 10, LC3 16_1_2] Passed BAP/UCL/STR/BV-071-C [UCL, AC 2, LC3 16_2_2] Passed BAP/UCL/STR/BV-072-C [UCL, AC 10, LC3 16_2_2] Passed BAP/UCL/STR/BV-073-C [UCL, AC 2, LC3 24_1_2] Passed BAP/UCL/STR/BV-074-C [UCL, AC 10, LC3 24_1_2] Passed BAP/UCL/STR/BV-075-C [UCL, AC 2, LC3 24_2_2] Passed BAP/UCL/STR/BV-076-C [UCL, AC 10, LC3 24_2_2] Passed BAP/UCL/STR/BV-077-C [UCL, AC 2, LC3 32_1_2] Passed BAP/UCL/STR/BV-078-C [UCL, AC 10, LC3 32_1_2] Passed BAP/UCL/STR/BV-079-C [UCL, AC 2, LC3 32_2_2] Passed BAP/UCL/STR/BV-080-C [UCL, AC 10, LC3 32_2_2] Passed BAP/UCL/STR/BV-081-C [UCL, AC 2, LC3 44_1_2] Passed BAP/UCL/STR/BV-082-C [UCL, AC 10, LC3 44_1_2] Passed BAP/UCL/STR/BV-083-C [UCL, AC 2, LC3 44_2_2] Passed BAP/UCL/STR/BV-084-C [UCL, AC 10, LC3 44_2_2] Passed BAP/UCL/STR/BV-085-C [UCL, AC 2, LC3 48_1_2] Passed BAP/UCL/STR/BV-086-C [UCL, AC 10, LC3 48_1_2] Passed BAP/UCL/STR/BV-087-C [UCL, AC 2, LC3 48_2_2] Passed BAP/UCL/STR/BV-088-C [UCL, AC 10, LC3 48_2_2] Passed BAP/UCL/STR/BV-089-C [UCL, AC 2, LC3 48_3_2] Passed BAP/UCL/STR/BV-090-C [UCL, AC 10, LC3 48_3_2] Passed BAP/UCL/STR/BV-091-C [UCL, AC 2, LC3 48_4_2] Passed BAP/UCL/STR/BV-092-C [UCL, AC 10, LC3 48_4_2] Passed BAP/UCL/STR/BV-093-C [UCL, AC 2, LC3 48_5_2] Passed BAP/UCL/STR/BV-094-C [UCL, AC 10, LC3 48_5_2] Passed BAP/UCL/STR/BV-095-C [UCL, AC 2, LC3 48_6_2] Passed BAP/UCL/STR/BV-096-C [UCL, AC 10, LC3 48_6_2] Passed BAP/UCL/STR/BV-097-C [UCL, SRC, AC 1, LC3 8_1_2] Passed BAP/UCL/STR/BV-098-C [UCL, SRC, AC 4, LC3 8_1_2] Passed BAP/UCL/STR/BV-099-C [UCL, SRC, AC 1, LC3 8_2_2] Passed BAP/UCL/STR/BV-100-C [UCL, SRC, AC 4, LC3 8_2_2] Passed BAP/UCL/STR/BV-101-C [UCL, SRC, AC 1, LC3 16_1_2] Passed BAP/UCL/STR/BV-102-C [UCL, SRC, AC 4, LC3 16_1_2] Passed BAP/UCL/STR/BV-103-C [UCL, SRC, AC 1, LC3 16_2_2] Passed BAP/UCL/STR/BV-104-C [UCL, SRC, AC 4, LC3 16_2_2] Passed BAP/UCL/STR/BV-105-C [UCL, SRC, AC 1, LC3 24_1_2] Passed BAP/UCL/STR/BV-106-C [UCL, SRC, AC 4, LC3 24_1_2] Passed BAP/UCL/STR/BV-107-C [UCL, SRC, AC 1, LC3 24_2_2] Passed BAP/UCL/STR/BV-108-C [UCL, SRC, AC 4, LC3 24_2_2] Passed BAP/UCL/STR/BV-109-C [UCL, SRC, AC 1, LC3 32_1_2] Passed BAP/UCL/STR/BV-110-C [UCL, SRC, AC 4, LC3 32_1_2] Passed BAP/UCL/STR/BV-111-C [UCL, SRC, AC 1, LC3 32_2_2] Passed BAP/UCL/STR/BV-112-C [UCL, SRC, AC 4, LC3 32_2_2] Passed BAP/UCL/STR/BV-113-C [UCL, SRC, AC 1, LC3 44_1_2] Passed BAP/UCL/STR/BV-114-C [UCL, SRC, AC 4, LC3 44_1_2] Passed BAP/UCL/STR/BV-115-C [UCL, SRC, AC 1, LC3 44_2_2] Passed BAP/UCL/STR/BV-116-C [UCL, SRC, AC 4, LC3 44_2_2] Passed BAP/UCL/STR/BV-117-C [UCL, SRC, AC 1, LC3 48_1_2] Passed BAP/UCL/STR/BV-118-C [UCL, SRC, AC 4, LC3 48_1_2] Passed BAP/UCL/STR/BV-119-C [UCL, SRC, AC 1, LC3 48_2_2] Passed BAP/UCL/STR/BV-120-C [UCL, SRC, AC 4, LC3 48_2_2] Passed BAP/UCL/STR/BV-121-C [UCL, SRC, AC 1, LC3 48_3_2] Passed BAP/UCL/STR/BV-122-C [UCL, SRC, AC 4, LC3 48_3_2] Passed BAP/UCL/STR/BV-123-C [UCL, SRC, AC 1, LC3 48_4_2] Passed BAP/UCL/STR/BV-124-C [UCL, SRC, AC 4, LC3 48_4_2] Passed BAP/UCL/STR/BV-121-C [UCL, SRC, AC 1, LC3 48_5_2] Passed BAP/UCL/STR/BV-122-C [UCL, SRC, AC 4, LC3 48_5_2] Passed BAP/UCL/STR/BV-123-C [UCL, SRC, AC 1, LC3 48_6_2] Passed BAP/UCL/STR/BV-124-C [UCL, SRC, AC 4, LC3 48_6_2] Passed Total: 128, Passed: 128 (100.0%), Failed: 0, Not Run: 0 Commit: 25507ba0d465ff359e43ab7cf866170e28993b3d https://github.com/bluez/bluez/commit/25507ba0d465ff359e43ab7cf866170e28993b3d Author: Marcel Holtmann <marcel@xxxxxxxxxxxx> Date: 2024-03-07 (Thu, 07 Mar 2024) Changed paths: M .gitignore Log Message: ----------- build: Add missing binaries to .gitignore Commit: 17cd5563f83769fe9f69802dcc05faf41f780b7a https://github.com/bluez/bluez/commit/17cd5563f83769fe9f69802dcc05faf41f780b7a Author: Marcel Holtmann <marcel@xxxxxxxxxxxx> Date: 2024-03-07 (Thu, 07 Mar 2024) Changed paths: M Makefile.am Log Message: ----------- build: Update library version Commit: 19f8fcdc2084048bebe5bd9ea4fb97f7ece16df0 https://github.com/bluez/bluez/commit/19f8fcdc2084048bebe5bd9ea4fb97f7ece16df0 Author: Marcel Holtmann <marcel@xxxxxxxxxxxx> Date: 2024-03-07 (Thu, 07 Mar 2024) Changed paths: M ChangeLog M configure.ac Log Message: ----------- Release 5.73 Compare: https://github.com/bluez/bluez/compare/b16b19885c53...19f8fcdc2084 To unsubscribe from these emails, change your notification settings at https://github.com/bluez/bluez/settings/notifications
