Use macro for image type instead of using hard code number.
Signed-off-by: Kiran K <kiran.k@xxxxxxxxx>
---
drivers/bluetooth/btintel.c | 12 ++++++------
drivers/bluetooth/btintel.h | 3 +++
2 files changed, 9 insertions(+), 6 deletions(-)
diff --git a/drivers/bluetooth/btintel.c b/drivers/bluetooth/btintel.c
index 6ba7f5d1b837..ed98bb867cff 100644
--- a/drivers/bluetooth/btintel.c
+++ b/drivers/bluetooth/btintel.c
@@ -489,7 +489,7 @@ static int btintel_version_info_tlv(struct hci_dev *hdev,
}
switch (version->img_type) {
- case 0x01:
+ case IMG_BOOTLOADER:
variant = "Bootloader";
/* It is required that every single firmware fragment is acknowledged
* with a command complete event. If the boot parameters indicate
@@ -521,7 +521,7 @@ static int btintel_version_info_tlv(struct hci_dev *hdev,
version->min_fw_build_nn, version->min_fw_build_cw,
2000 + version->min_fw_build_yy);
break;
- case 0x03:
+ case IMG_OP:
variant = "Firmware";
break;
default:
@@ -535,7 +535,7 @@ static int btintel_version_info_tlv(struct hci_dev *hdev,
bt_dev_info(hdev, "%s timestamp %u.%u buildtype %u build %u", variant,
2000 + (version->timestamp >> 8), version->timestamp & 0xff,
version->build_type, version->build_num);
- if (version->img_type == 0x03)
+ if (version->img_type == IMG_OP)
bt_dev_info(hdev, "Firmware SHA1: 0x%8.8x", version->git_sha1);
return 0;
@@ -1172,7 +1172,7 @@ static int btintel_download_fw_tlv(struct hci_dev *hdev,
* If the firmware version has changed that means it needs to be reset
* to bootloader when operational so the new firmware can be loaded.
*/
- if (ver->img_type == 0x03)
+ if (ver->img_type == IMG_OP)
return -EINVAL;
/* iBT hardware variants 0x0b, 0x0c, 0x11, 0x12, 0x13, 0x14 support
@@ -2230,7 +2230,7 @@ static int btintel_prepare_fw_download_tlv(struct hci_dev *hdev,
* It is not possible to use the Secure Boot Parameters in this
* case since that command is only available in bootloader mode.
*/
- if (ver->img_type == 0x03) {
+ if (ver->img_type == IMG_OP) {
btintel_clear_flag(hdev, INTEL_BOOTLOADER);
btintel_check_bdaddr(hdev);
} else {
@@ -2600,7 +2600,7 @@ static int btintel_bootloader_setup_tlv(struct hci_dev *hdev,
return err;
/* check if controller is already having an operational firmware */
- if (ver->img_type == 0x03)
+ if (ver->img_type == IMG_OP)
goto finish;
err = btintel_boot(hdev, boot_param);
diff --git a/drivers/bluetooth/btintel.h b/drivers/bluetooth/btintel.h
index d19fcdb9ff0b..52b2f1986f85 100644
--- a/drivers/bluetooth/btintel.h
+++ b/drivers/bluetooth/btintel.h
@@ -51,6 +51,9 @@ struct intel_tlv {
u8 val[];
} __packed;
+#define IMG_BOOTLOADER 0x01 /* Bootloader image */
+#define IMG_OP 0x03 /* Operational image */
+
struct intel_version_tlv {
u32 cnvi_top;
u32 cnvr_top;
--
2.34.1
