Hi Luiz, ke, 2024-02-28 kello 15:31 -0500, Luiz Augusto von Dentz kirjoitti: > Hi Pauli, > > On Wed, Feb 28, 2024 at 3:11 PM Pauli Virtanen <pav@xxxxxx> wrote: > > > > Add ISO/L2CAP socket ioctl() BTGETTXINFO which informs the user how long > > it took the kernel and controller to complete their sendmsg(), and how > > many sendmsg() are in socket and controller queues. > > > > This currently provides information of the latest packet only, in > > principle there could be a ringbuffer containing few latest packets, not > > clear if that would be useful. > > > > These patches allow fixing / working around controller(?) issue where > > two ISO streams in same group get desynchronized. Having accurate > > knowledge of the packet queue lengths, user application can drop packets > > if it detects the ISO streams are not in sync. > > > > Pipewire side: > > https://gitlab.freedesktop.org/pvir/pipewire/-/commits/iso-ts-test > > > > With this change, https://github.com/bluez/bluez/issues/515 is more or > > less fixed, and the sound server can figure out the total latency to > > audio rendering (tx latency + transport latency + presentation delay). > > > > For ISO, this can be changed to use LE Read ISO TX Sync, when the clock > > and sequence number synchronization issues there are figured out, and a > > quirk is added for controllers with nonfunctional implementation. > > > > For the L2CAP latency, I'll need to think a bit more what is the audio > > use case. Motivation was that AVDTP delay report values appear to be off > > by ~0..40 ms compared to observed audio latency and this amount can vary > > per connection and time, so not explained by unaccounted code > > algorithmic delays etc. Currently it's not clear if there is relation to > > TX side latency, so it may be down to receiver side implementation. > > > > This needs a bit more work to figure out, but the L2CAP patch is anyway > > here. Due to the possible fragmentation in ISO sendmsg(), it seems we > > anyway need the tx_info_queue thing and can't easily do it by counting > > packets, and L2CAP required part is small addition on top of that. > > That is not how it is normally done with sockets, normally this is > done with use of SO_TIMESTAMPING which is then reported using the > socket error queue: > > https://www.kernel.org/doc/html/latest/networking/timestamping.html > > Sorry to tell you just now, you might have lost a lot of time doing > all of the changes, next time just drop and RFC early on with the > general design so you don't spend too much time before getting any > feedback. Thanks, looks like I missed that was not just for RX timestamping. We then need to hang on to the skbs to be timestamped in hci_core until packet completion. Looks like skb_queue_* is used by drivers, so probably skb_get and ringbuffer like in this patchset then. > > TBD: iso-tester / l2cap-tester tests > > > > Pauli Virtanen (3): > > Bluetooth: add transmission latency tracking for ISO and ACL > > Bluetooth: ISO: add new ioctl() for reading tx latency > > Bluetooth: L2CAP: add new ioctl() for reading tx latency > > > > include/net/bluetooth/bluetooth.h | 39 +++++++++++ > > include/net/bluetooth/hci_core.h | 30 ++++++++ > > net/bluetooth/hci_conn.c | 110 +++++++++++++++++++++++++++++- > > net/bluetooth/hci_core.c | 14 ++++ > > net/bluetooth/hci_event.c | 66 ++++++++++++++++++ > > net/bluetooth/iso.c | 58 ++++++++++++++-- > > net/bluetooth/l2cap_core.c | 12 ++++ > > net/bluetooth/l2cap_sock.c | 50 +++++++++++++- > > 8 files changed, 372 insertions(+), 7 deletions(-) > > > > -- > > 2.44.0 > > > > > > -- Pauli Virtanen
