Re: [PATCH] Bluetooth: hci_bcm4377: do not mark valid bd_addr as invalid

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 2023-12-27 at 11:10 +0100, Johan Hovold wrote:
> A recent commit restored the original (and still documented)
> semantics
> for the HCI_QUIRK_USE_BDADDR_PROPERTY quirk so that the device
> address
> is considered invalid unless an address is provided by firmware.
> 
> This specifically means that this flag must only be set for devices
> with
> invalid addresses, but the Broadcom BCM4377 driver has so far been
> setting this flag unconditionally.
> 
> Fortunately the driver already checks for invalid addresses during
> setup
> and sets the HCI_QUIRK_INVALID_BDADDR flag, which can simply be
> replaced
> with HCI_QUIRK_USE_BDADDR_PROPERTY to indicate that the default
> address
> is invalid but can be overridden by firmware (long term, this should
> probably just always be allowed).
> 
> Fixes: 6945795bc81a ("Bluetooth: fix use-bdaddr-property quirk")
> Cc: stable@xxxxxxxxxxxxxxx      # 6.5
> Reported-by: Felix Zhang <mrman@xxxxxxxxxxxxx>
> Link:
> https://lore.kernel.org/r/77419ffacc5b4875e920e038332575a2a5bff29f.camel@xxxxxxxxxxxxx/
> Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
> ---
>  drivers/bluetooth/hci_bcm4377.c | 3 +--
>  1 file changed, 1 insertion(+), 2 deletions(-)
> 
> diff --git a/drivers/bluetooth/hci_bcm4377.c
> b/drivers/bluetooth/hci_bcm4377.c
> index a61757835695..9a7243d5db71 100644
> --- a/drivers/bluetooth/hci_bcm4377.c
> +++ b/drivers/bluetooth/hci_bcm4377.c
> @@ -1417,7 +1417,7 @@ static int bcm4377_check_bdaddr(struct
> bcm4377_data *bcm4377)
>  
>  	bda = (struct hci_rp_read_bd_addr *)skb->data;
>  	if (!bcm4377_is_valid_bdaddr(bcm4377, &bda->bdaddr))
> -		set_bit(HCI_QUIRK_INVALID_BDADDR, &bcm4377->hdev-
> >quirks);
> +		set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &bcm4377-
> >hdev->quirks);
>  
>  	kfree_skb(skb);
>  	return 0;
> @@ -2368,7 +2368,6 @@ static int bcm4377_probe(struct pci_dev *pdev,
> const struct pci_device_id *id)
>  	hdev->set_bdaddr = bcm4377_hci_set_bdaddr;
>  	hdev->setup = bcm4377_hci_setup;
>  
> -	set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks);
>  	if (bcm4377->hw->broken_mws_transport_config)
>  		set_bit(HCI_QUIRK_BROKEN_MWS_TRANSPORT_CONFIG,
> &hdev->quirks);
>  	if (bcm4377->hw->broken_ext_scan)
Hi,

Thanks for the patch!  I have just tested the patch on my MacBookAir9,1
with some modifications to make it patch with the master branch of the
Linux kernel, and it works great!  The device is recognized by the
system; and I can scan, pair, connect, and play audio just fine.  If
you want me to send over the modified patch that I have used, please
let me know.

Thanks!





[Index of Archives]     [Bluez Devel]     [Linux Wireless Networking]     [Linux Wireless Personal Area Networking]     [Linux ATH6KL]     [Linux USB Devel]     [Linux Media Drivers]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Big List of Linux Books]

  Powered by Linux