On Fri, Dec 8, 2023 at 11:32 AM Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx> wrote: > > On Fri, Dec 08, 2023 at 10:09:33AM +0100, Bartosz Golaszewski wrote: > > From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx> > > > > Resending with all maintainers in CC. > > > > Patch 1 is just a typo fix as we're already touching this bindings. The > > second patch adds more regulator definitions and enforces them for the > > QCA6390 model. The final patch enables the power sequence for the BT > > module of QCA6390 in the hci_qca driver. > > > > Is bluetooth fully functional without handling WLAN specific resources like > regulators, enable GPIO? When I checked last time, the chip requires both > Bluetooth and WLAN resources to become fully operational. > WLAN-specific regulators for PCIe are enabled anyway but the WLAN enable GPIO is low and the relevant pin function is not even configured. I can confirm Bluetooth is functional. I too thought we'd need a common power-sequence here but Abel pointed out that neither RB5 nor X13s require it, it's only needed in later models. Bart > - Mani > > > v1 -> v2: > > - squashed the two bluetooth patches into one > > - changed the naming convention for the RFA regulators to follow the > > existing ones > > - added dt-bindings patches > > > > Bartosz Golaszewski (3): > > dt-bindings: net: bluetooth: qualcomm: fix a typo > > dt-bindings: net: bluetooth: qualcomm: add regulators for QCA6390 > > Bluetooth: qca: run the power-on/off sequence for QCA6390 too > > > > .../net/bluetooth/qualcomm-bluetooth.yaml | 26 ++++++++++++++++++- > > drivers/bluetooth/hci_qca.c | 14 +++++++++- > > 2 files changed, 38 insertions(+), 2 deletions(-) > > > > -- > > 2.40.1 > > > > > > -- > மணிவண்ணன் சதாசிவம்
