[PATCH 2/2] Revert "xhci: Loosen RPM as default policy to cover for AMD xHC 1.1"

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This reverts commit 4baf1218150985ee3ab0a27220456a1f027ea0ac.

Enabling runtime pm as default for all AMD xHC 1.1 controllers caused
regression. An initial attempt to fix those was done in commit a5d6264b638e
("xhci: Enable RPM on controllers that support low-power states") but new
issues are still seen.

Revert them both and start from a clean slate.

This patch went to stable an needs to be reverted from there as well.

Fixes: 4baf12181509 ("xhci: Loosen RPM as default policy to cover for AMD xHC 1.1")
Link: https://lore.kernel.org/linux-usb/55c50bf5-bffb-454e-906e-4408c591cb63@xxxxxxxxxxxxx
Cc: Mario Limonciello <mario.limonciello@xxxxxxx>
Cc: Basavaraj Natikar <Basavaraj.Natikar@xxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
---
 drivers/usb/host/xhci-pci.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index bde43cef8846..b9ae5c2a2527 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -535,8 +535,6 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 	/* xHC spec requires PCI devices to support D3hot and D3cold */
 	if (xhci->hci_version >= 0x120)
 		xhci->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW;
-	else if (pdev->vendor == PCI_VENDOR_ID_AMD && xhci->hci_version >= 0x110)
-		xhci->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW;
 
 	if (xhci->quirks & XHCI_RESET_ON_RESUME)
 		xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
-- 
2.25.1





[Index of Archives]     [Bluez Devel]     [Linux Wireless Networking]     [Linux Wireless Personal Area Networking]     [Linux ATH6KL]     [Linux USB Devel]     [Linux Media Drivers]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Big List of Linux Books]

  Powered by Linux