Branch: refs/heads/master Home: https://github.com/bluez/bluez Commit: ad089d29945ffd0ffb2d8075c25f76ac7c267eba https://github.com/bluez/bluez/commit/ad089d29945ffd0ffb2d8075c25f76ac7c267eba Author: Philipp Meyer <Philipp.Meyer@xxxxxxxxxxxxxxx> Date: 2023-11-14 (Tue, 14 Nov 2023) Changed paths: M src/adapter.c Log Message: ----------- adapter: fix heap corruption during discovery filter parsing Must parse as dbus_bool_t, as booleans MUST be 4 bytes for dbus. stdbool from the filter only has 1 byte in many cases. This will crash dbus if parsing filter->duplicate directly in dbus_message_iter_get_basic. Commit: 14dd4a75ceb284bf4fda00d1c318683fbaa4ac07 https://github.com/bluez/bluez/commit/14dd4a75ceb284bf4fda00d1c318683fbaa4ac07 Author: Pauli Virtanen <pav@xxxxxx> Date: 2023-11-14 (Tue, 14 Nov 2023) Changed paths: M profiles/audio/media.c Log Message: ----------- media: add Retransmissions in SelectProperties QoS The server preferred RTN is part of the server supported/preferred QoS values, and should be passed on to SelectProperties. Commit: 8b035b70f379e45a32c94579ec8d00e48070c21e https://github.com/bluez/bluez/commit/8b035b70f379e45a32c94579ec8d00e48070c21e Author: Pauli Virtanen <pav@xxxxxx> Date: 2023-11-14 (Tue, 14 Nov 2023) Changed paths: M profiles/audio/bap.c Log Message: ----------- bap: handle state transitions with old_state == new_state ASCS allows transitions from Codec/QoS Configured back to the same state. E.g. NRF5340_AUDIO devkit starts in the config(1) state, which is allowed (only Config QoS, Release, Enable, Receiver Stop Ready transition are client-only). In this case, as client, we do Config Codec ourselves and end up with config(1)->config(1) transition. We currently ignore that event, so QoS won't be setup and transports won't be created. Handle the config(1)->config(1) transition by continuing to Config QoS if it occurs. Log: src/gatt-client.c:btd_gatt_client_connected() Device connected. src/shared/gatt-client.c:exchange_mtu_cb() MTU exchange complete, with MTU: 65 src/shared/bap.c:bap_ep_set_status() ASE status: ep 0x604000039a90 id 0x01 handle 0x000f state config len 42 src/shared/bap.c:ep_status_config() codec 0x06 framing 0x00 phy 0x02 rtn 2 latency 10 pd 4000 - 40000 ppd 4000 - 40000 src/shared/bap.c:ep_status_config() Codec Config #0: type 0x01 len 2 src/shared/bap.c:ep_status_config() Codec Config #1: type 0x02 len 2 src/shared/bap.c:ep_status_config() Codec Config #2: type 0x03 len 5 src/shared/bap.c:ep_status_config() Codec Config #3: type 0x04 len 3 src/shared/bap.c:ep_status_config() Codec Config #4: type 0x05 len 2 src/shared/bap.c:bap_stream_state_changed() stream 0x60c0000334c0 dir 0x01: idle -> config src/shared/bap.c:bap_stream_update_io_links() stream 0x60c0000334c0 profiles/audio/bap.c:bap_state() stream 0x60c0000334c0: idle(0) -> config(1) profiles/audio/bap.c:bap_ready() bap 0x60e000001d20 profiles/audio/bap.c:pac_found() lpac 0x608000017520 rpac 0x6080000183a0 profiles/audio/bap.c:ep_register() ep 0x60d000006910 lpac 0x608000017520 rpac 0x6080000183a0 path /org/bluez/hci0/dev_C9_C9_76_21_08_4F/pac_sink0 profiles/audio/media.c:media_endpoint_async_call() Calling SelectProperties: name = :1.604 path = /MediaEndpointLE/BAPSource/lc3 ... src/shared/bap.c:bap_stream_state_changed() stream 0x60c0000334c0 dir 0x01: config -> config src/shared/bap.c:bap_stream_update_io_links() stream 0x60c0000334c0 profiles/audio/bap.c:bap_state() stream 0x60c0000334c0: config(1) -> config(1) Compare: https://github.com/bluez/bluez/compare/4b353ae99ab6...8b035b70f379
