ASCS allows transitions from Codec/QoS Configured back to the same state. E.g. NRF5340_AUDIO devkit starts in the config(1) state, which is allowed (only Config QoS, Release, Enable, Receiver Stop Ready transition are client-only). In this case, as client, we do Config Codec ourselves and end up with config(1)->config(1) transition. We currently ignore that event, so QoS won't be setup and transports won't be created. Handle the config(1)->config(1) transition by continuing to Config QoS if it occurs. Log: src/gatt-client.c:btd_gatt_client_connected() Device connected. src/shared/gatt-client.c:exchange_mtu_cb() MTU exchange complete, with MTU: 65 src/shared/bap.c:bap_ep_set_status() ASE status: ep 0x604000039a90 id 0x01 handle 0x000f state config len 42 src/shared/bap.c:ep_status_config() codec 0x06 framing 0x00 phy 0x02 rtn 2 latency 10 pd 4000 - 40000 ppd 4000 - 40000 src/shared/bap.c:ep_status_config() Codec Config #0: type 0x01 len 2 src/shared/bap.c:ep_status_config() Codec Config #1: type 0x02 len 2 src/shared/bap.c:ep_status_config() Codec Config #2: type 0x03 len 5 src/shared/bap.c:ep_status_config() Codec Config #3: type 0x04 len 3 src/shared/bap.c:ep_status_config() Codec Config #4: type 0x05 len 2 src/shared/bap.c:bap_stream_state_changed() stream 0x60c0000334c0 dir 0x01: idle -> config src/shared/bap.c:bap_stream_update_io_links() stream 0x60c0000334c0 profiles/audio/bap.c:bap_state() stream 0x60c0000334c0: idle(0) -> config(1) profiles/audio/bap.c:bap_ready() bap 0x60e000001d20 profiles/audio/bap.c:pac_found() lpac 0x608000017520 rpac 0x6080000183a0 profiles/audio/bap.c:ep_register() ep 0x60d000006910 lpac 0x608000017520 rpac 0x6080000183a0 path /org/bluez/hci0/dev_C9_C9_76_21_08_4F/pac_sink0 profiles/audio/media.c:media_endpoint_async_call() Calling SelectProperties: name = :1.604 path = /MediaEndpointLE/BAPSource/lc3 ... src/shared/bap.c:bap_stream_state_changed() stream 0x60c0000334c0 dir 0x01: config -> config src/shared/bap.c:bap_stream_update_io_links() stream 0x60c0000334c0 profiles/audio/bap.c:bap_state() stream 0x60c0000334c0: config(1) -> config(1) --- profiles/audio/bap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/profiles/audio/bap.c b/profiles/audio/bap.c index b74498c4c..30a585ede 100644 --- a/profiles/audio/bap.c +++ b/profiles/audio/bap.c @@ -1887,7 +1887,7 @@ static void bap_state(struct bt_bap_stream *stream, uint8_t old_state, bt_bap_stream_statestr(old_state), old_state, bt_bap_stream_statestr(new_state), new_state); - if (new_state == old_state) + if (old_state == new_state && new_state != BT_BAP_STREAM_STATE_CONFIG) return; ep = bap_find_ep_by_stream(data, stream); -- 2.41.0
