Document the actual input and output parameter values used in
SelectProperties. These differ from SetConfiguration.
Mention SelectProperties is used for unicast only.
Document SetConfiguration input parameters.
---
Notes:
v2: put SelectProperties QoS things to "QoS" dict
doc/org.bluez.MediaEndpoint.rst | 48 +++++++++++++++++++++++++++------
1 file changed, 40 insertions(+), 8 deletions(-)
diff --git a/doc/org.bluez.MediaEndpoint.rst b/doc/org.bluez.MediaEndpoint.rst
index 0e201ff9d..6754d6e3b 100644
--- a/doc/org.bluez.MediaEndpoint.rst
+++ b/doc/org.bluez.MediaEndpoint.rst
@@ -24,14 +24,24 @@ Interface
Methods
-------
+.. _SetConfiguration:
+
void SetConfiguration(object transport, dict properties)
````````````````````````````````````````````````````````
Set configuration for the transport.
- For client role transport must be set with a server endpoint oject which
- will be configured and the properties must contain the following
- properties:
+ :object transport:
+
+ Configured transport object.
+
+ :dict properties:
+
+ Configured **org.bluez.MediaTransport(5)** properties.
+
+ For client role transport must be set with a server endpoint
+ object which will be configured and the properties must
+ contain the following properties:
:array{byte} Capabilities [Mandatory]:
@@ -59,13 +69,35 @@ array{byte} SelectConfiguration(array{byte} capabilities)
dict SelectProperties(dict capabilities)
````````````````````````````````````````
- Select configuration from the supported capabilities:
+ Select BAP unicast configuration from the supported capabilities:
- :object Endpoint [ISO only]:
- :Refer to SetConfiguration for the list of other possible properties.:
+ :object Endpoint:
- Returns a configuration which can be used to setup a transport, see
- **org.bluez.MediaTransport(5)** for possible values.
+ :array{byte} Capabilities:
+
+ :array{byte} Metadata:
+
+ :uint32 Locations:
+
+ :dict QoS:
+
+ :byte Framing:
+ :byte PHY:
+ :uint16 MaximumLatency:
+ :uint32 MinimumDelay:
+ :uint32 MaximumDelay:
+ :uint32 PreferredMinimumDelay:
+ :uint32 PreferredMaximumDelay:
+
+ See `MediaEndpoint Properties`_ for their possible values.
+
+ Returns a configuration which can be used to setup a transport:
+
+ :array{byte} Capabilities:
+ :array{byte} Metadata [optional]:
+ :dict QoS:
+
+ See `SetConfiguration`_ for their possible values.
Note: There is no need to cache the selected properties since on
success the configuration is send back as parameter of SetConfiguration.
--
2.41.0
