On Mon, 7 Aug 2023 09:44:15 +0800
<max.chou@xxxxxxxxxxx> wrote:
> From: Max Chou <max.chou@xxxxxxxxxxx>
>
> In the commit of linux-firmware project, rtl8852cu_fw.bin is updated as
> FW v2 format[1]. Consider the case that if driver did not be updated for
> FW v2 supported[2], it can not use FW v2.
> By Canonical's suggestion, older driver should be able to load FW v1,
> so rtl8852cu_fw.bin will be revert to the previous commit as FW v1 and
> add rtl8852cu_fw_v2.bin as FW v2. This item will be started on
> linux-firmware project.
>
> In this commit, the driver prefers to load FW v2 if available. Fallback to
> FW v1 otherwise.
>
> Note that the driver has supported to extract the data for v1 and v2
> since the commit[1].
> The previous FW format of RTL8852C is v1. After the commit[2], the FW
> format was changed to v2. Only RTL8852C suffered the different FW formats,
> so we will use rtl8852cu_fw.bin for the original commit as FW v1 and
> rtl8852cu_fw_v2.bin for the future maintained as FW v2. Other Realtek
> chips will not been impacted by this patch.
>
> To do on linux-firmware project after this commit.
> 1. revert '55e7448533e7 ("rtl_bt: Update RTL8852C BT USB firmware
> to 0x040D_7225")'
> => rtl_bt/rtl8852cu_fw.bin: FW v1 (stay at ver. 0xD7B8_FABF)
> 2. Add a new commit for rtl8852cu_fw_v2.bin
> =>rtl_bt/rtl8852cu_fw_v2.bin: FW v2 (to be maintained)
>
> Reference:
> [1]'9a24ce5e29b1 ("Bluetooth: btrtl: Firmware format v2 support")'
> [2]'55e7448533e7 ("rtl_bt: Update RTL8852C BT USB firmware
> to 0x040D_7225")'
IMO this commit message is too confusing. I don't think you need nor should
refer to linux-firmware commits and what happened in that repo. This commit
simply fixes the v2 support by trying to load a v2 file for certain chips
with a fall-back if fw is not found (or failed to load). That's all that
needs to be mentioned in the commit message.
> Fixes: '9a24ce5e29b ("Bluetooth: btrtl: Firmware format v2 support")'
No '' quotes.
...Juerg
> Suggested-by: Juerg Haefliger <juerg.haefliger@xxxxxxxxxxxxx>
> Tested-by: Hilda Wu <hildawu@xxxxxxxxxxx>
> Signed-off-by: Max Chou <max.chou@xxxxxxxxxxx>
>
> ---
> Changes in v2:
> - Fix commit log for CheckPatch FAIL
>
> Changes in v2:
> - Tuning the code for more readable. Thanks Juerg!
> - Modify the commit log.
> ---
> drivers/bluetooth/btrtl.c | 70 +++++++++++++++++++++++++--------------
> 1 file changed, 45 insertions(+), 25 deletions(-)
>
> diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
> index ddae6524106d..84c2c2e1122f 100644
> --- a/drivers/bluetooth/btrtl.c
> +++ b/drivers/bluetooth/btrtl.c
> @@ -104,7 +104,7 @@ static const struct id_table ic_id_table[] = {
> { IC_INFO(RTL_ROM_LMP_8723A, 0xb, 0x6, HCI_USB),
> .config_needed = false,
> .has_rom_version = false,
> - .fw_name = "rtl_bt/rtl8723a_fw.bin",
> + .fw_name = "rtl_bt/rtl8723a_fw",
> .cfg_name = NULL,
> .hw_info = "rtl8723au" },
>
> @@ -112,7 +112,7 @@ static const struct id_table ic_id_table[] = {
> { IC_INFO(RTL_ROM_LMP_8723B, 0xb, 0x6, HCI_UART),
> .config_needed = true,
> .has_rom_version = true,
> - .fw_name = "rtl_bt/rtl8723bs_fw.bin",
> + .fw_name = "rtl_bt/rtl8723bs_fw",
> .cfg_name = "rtl_bt/rtl8723bs_config",
> .hw_info = "rtl8723bs" },
>
> @@ -120,7 +120,7 @@ static const struct id_table ic_id_table[] = {
> { IC_INFO(RTL_ROM_LMP_8723B, 0xb, 0x6, HCI_USB),
> .config_needed = false,
> .has_rom_version = true,
> - .fw_name = "rtl_bt/rtl8723b_fw.bin",
> + .fw_name = "rtl_bt/rtl8723b_fw",
> .cfg_name = "rtl_bt/rtl8723b_config",
> .hw_info = "rtl8723bu" },
>
> @@ -132,7 +132,7 @@ static const struct id_table ic_id_table[] = {
> .hci_bus = HCI_UART,
> .config_needed = true,
> .has_rom_version = true,
> - .fw_name = "rtl_bt/rtl8723cs_cg_fw.bin",
> + .fw_name = "rtl_bt/rtl8723cs_cg_fw",
> .cfg_name = "rtl_bt/rtl8723cs_cg_config",
> .hw_info = "rtl8723cs-cg" },
>
> @@ -144,7 +144,7 @@ static const struct id_table ic_id_table[] = {
> .hci_bus = HCI_UART,
> .config_needed = true,
> .has_rom_version = true,
> - .fw_name = "rtl_bt/rtl8723cs_vf_fw.bin",
> + .fw_name = "rtl_bt/rtl8723cs_vf_fw",
> .cfg_name = "rtl_bt/rtl8723cs_vf_config",
> .hw_info = "rtl8723cs-vf" },
>
> @@ -156,7 +156,7 @@ static const struct id_table ic_id_table[] = {
> .hci_bus = HCI_UART,
> .config_needed = true,
> .has_rom_version = true,
> - .fw_name = "rtl_bt/rtl8723cs_xx_fw.bin",
> + .fw_name = "rtl_bt/rtl8723cs_xx_fw",
> .cfg_name = "rtl_bt/rtl8723cs_xx_config",
> .hw_info = "rtl8723cs" },
>
> @@ -164,7 +164,7 @@ static const struct id_table ic_id_table[] = {
> { IC_INFO(RTL_ROM_LMP_8723B, 0xd, 0x8, HCI_USB),
> .config_needed = true,
> .has_rom_version = true,
> - .fw_name = "rtl_bt/rtl8723d_fw.bin",
> + .fw_name = "rtl_bt/rtl8723d_fw",
> .cfg_name = "rtl_bt/rtl8723d_config",
> .hw_info = "rtl8723du" },
>
> @@ -172,7 +172,7 @@ static const struct id_table ic_id_table[] = {
> { IC_INFO(RTL_ROM_LMP_8723B, 0xd, 0x8, HCI_UART),
> .config_needed = true,
> .has_rom_version = true,
> - .fw_name = "rtl_bt/rtl8723ds_fw.bin",
> + .fw_name = "rtl_bt/rtl8723ds_fw",
> .cfg_name = "rtl_bt/rtl8723ds_config",
> .hw_info = "rtl8723ds" },
>
> @@ -180,7 +180,7 @@ static const struct id_table ic_id_table[] = {
> { IC_INFO(RTL_ROM_LMP_8821A, 0xa, 0x6, HCI_USB),
> .config_needed = false,
> .has_rom_version = true,
> - .fw_name = "rtl_bt/rtl8821a_fw.bin",
> + .fw_name = "rtl_bt/rtl8821a_fw",
> .cfg_name = "rtl_bt/rtl8821a_config",
> .hw_info = "rtl8821au" },
>
> @@ -189,7 +189,7 @@ static const struct id_table ic_id_table[] = {
> .config_needed = false,
> .has_rom_version = true,
> .has_msft_ext = true,
> - .fw_name = "rtl_bt/rtl8821c_fw.bin",
> + .fw_name = "rtl_bt/rtl8821c_fw",
> .cfg_name = "rtl_bt/rtl8821c_config",
> .hw_info = "rtl8821cu" },
>
> @@ -198,7 +198,7 @@ static const struct id_table ic_id_table[] = {
> .config_needed = true,
> .has_rom_version = true,
> .has_msft_ext = true,
> - .fw_name = "rtl_bt/rtl8821cs_fw.bin",
> + .fw_name = "rtl_bt/rtl8821cs_fw",
> .cfg_name = "rtl_bt/rtl8821cs_config",
> .hw_info = "rtl8821cs" },
>
> @@ -206,7 +206,7 @@ static const struct id_table ic_id_table[] = {
> { IC_INFO(RTL_ROM_LMP_8761A, 0xa, 0x6, HCI_USB),
> .config_needed = false,
> .has_rom_version = true,
> - .fw_name = "rtl_bt/rtl8761a_fw.bin",
> + .fw_name = "rtl_bt/rtl8761a_fw",
> .cfg_name = "rtl_bt/rtl8761a_config",
> .hw_info = "rtl8761au" },
>
> @@ -215,7 +215,7 @@ static const struct id_table ic_id_table[] = {
> .config_needed = false,
> .has_rom_version = true,
> .has_msft_ext = true,
> - .fw_name = "rtl_bt/rtl8761b_fw.bin",
> + .fw_name = "rtl_bt/rtl8761b_fw",
> .cfg_name = "rtl_bt/rtl8761b_config",
> .hw_info = "rtl8761btv" },
>
> @@ -223,7 +223,7 @@ static const struct id_table ic_id_table[] = {
> { IC_INFO(RTL_ROM_LMP_8761A, 0xb, 0xa, HCI_USB),
> .config_needed = false,
> .has_rom_version = true,
> - .fw_name = "rtl_bt/rtl8761bu_fw.bin",
> + .fw_name = "rtl_bt/rtl8761bu_fw",
> .cfg_name = "rtl_bt/rtl8761bu_config",
> .hw_info = "rtl8761bu" },
>
> @@ -232,7 +232,7 @@ static const struct id_table ic_id_table[] = {
> .config_needed = true,
> .has_rom_version = true,
> .has_msft_ext = true,
> - .fw_name = "rtl_bt/rtl8822cs_fw.bin",
> + .fw_name = "rtl_bt/rtl8822cs_fw",
> .cfg_name = "rtl_bt/rtl8822cs_config",
> .hw_info = "rtl8822cs" },
>
> @@ -241,7 +241,7 @@ static const struct id_table ic_id_table[] = {
> .config_needed = true,
> .has_rom_version = true,
> .has_msft_ext = true,
> - .fw_name = "rtl_bt/rtl8822cs_fw.bin",
> + .fw_name = "rtl_bt/rtl8822cs_fw",
> .cfg_name = "rtl_bt/rtl8822cs_config",
> .hw_info = "rtl8822cs" },
>
> @@ -250,7 +250,7 @@ static const struct id_table ic_id_table[] = {
> .config_needed = false,
> .has_rom_version = true,
> .has_msft_ext = true,
> - .fw_name = "rtl_bt/rtl8822cu_fw.bin",
> + .fw_name = "rtl_bt/rtl8822cu_fw",
> .cfg_name = "rtl_bt/rtl8822cu_config",
> .hw_info = "rtl8822cu" },
>
> @@ -259,7 +259,7 @@ static const struct id_table ic_id_table[] = {
> .config_needed = true,
> .has_rom_version = true,
> .has_msft_ext = true,
> - .fw_name = "rtl_bt/rtl8822b_fw.bin",
> + .fw_name = "rtl_bt/rtl8822b_fw",
> .cfg_name = "rtl_bt/rtl8822b_config",
> .hw_info = "rtl8822bu" },
>
> @@ -268,7 +268,7 @@ static const struct id_table ic_id_table[] = {
> .config_needed = false,
> .has_rom_version = true,
> .has_msft_ext = true,
> - .fw_name = "rtl_bt/rtl8852au_fw.bin",
> + .fw_name = "rtl_bt/rtl8852au_fw",
> .cfg_name = "rtl_bt/rtl8852au_config",
> .hw_info = "rtl8852au" },
>
> @@ -277,7 +277,7 @@ static const struct id_table ic_id_table[] = {
> .config_needed = true,
> .has_rom_version = true,
> .has_msft_ext = true,
> - .fw_name = "rtl_bt/rtl8852bs_fw.bin",
> + .fw_name = "rtl_bt/rtl8852bs_fw",
> .cfg_name = "rtl_bt/rtl8852bs_config",
> .hw_info = "rtl8852bs" },
>
> @@ -286,7 +286,7 @@ static const struct id_table ic_id_table[] = {
> .config_needed = false,
> .has_rom_version = true,
> .has_msft_ext = true,
> - .fw_name = "rtl_bt/rtl8852bu_fw.bin",
> + .fw_name = "rtl_bt/rtl8852bu_fw",
> .cfg_name = "rtl_bt/rtl8852bu_config",
> .hw_info = "rtl8852bu" },
>
> @@ -295,7 +295,7 @@ static const struct id_table ic_id_table[] = {
> .config_needed = false,
> .has_rom_version = true,
> .has_msft_ext = true,
> - .fw_name = "rtl_bt/rtl8852cu_fw.bin",
> + .fw_name = "rtl_bt/rtl8852cu_fw",
> .cfg_name = "rtl_bt/rtl8852cu_config",
> .hw_info = "rtl8852cu" },
>
> @@ -304,7 +304,7 @@ static const struct id_table ic_id_table[] = {
> .config_needed = false,
> .has_rom_version = true,
> .has_msft_ext = false,
> - .fw_name = "rtl_bt/rtl8851bu_fw.bin",
> + .fw_name = "rtl_bt/rtl8851bu_fw",
> .cfg_name = "rtl_bt/rtl8851bu_config",
> .hw_info = "rtl8851bu" },
> };
> @@ -1045,6 +1045,7 @@ struct btrtl_device_info *btrtl_initialize(struct hci_dev *hdev,
> struct sk_buff *skb;
> struct hci_rp_read_local_version *resp;
> struct hci_command_hdr *cmd;
> + char fw_name[40];
> char cfg_name[40];
> u16 hci_rev, lmp_subver;
> u8 hci_ver, lmp_ver, chip_type = 0;
> @@ -1154,8 +1155,26 @@ struct btrtl_device_info *btrtl_initialize(struct hci_dev *hdev,
> goto err_free;
> }
>
> - btrtl_dev->fw_len = rtl_load_file(hdev, btrtl_dev->ic_info->fw_name,
> - &btrtl_dev->fw_data);
> + if (!btrtl_dev->ic_info->fw_name) {
> + ret = -ENOMEM;
> + goto err_free;
> + }
> +
> + btrtl_dev->fw_len = -EIO;
> + if (lmp_subver == RTL_ROM_LMP_8852A && hci_rev == 0x000c) {
> + snprintf(fw_name, sizeof(fw_name), "%s_v2.bin",
> + btrtl_dev->ic_info->fw_name);
> + btrtl_dev->fw_len = rtl_load_file(hdev, fw_name,
> + &btrtl_dev->fw_data);
> + }
> +
> + if (btrtl_dev->fw_len < 0) {
> + snprintf(fw_name, sizeof(fw_name), "%s.bin",
> + btrtl_dev->ic_info->fw_name);
> + btrtl_dev->fw_len = rtl_load_file(hdev, fw_name,
> + &btrtl_dev->fw_data);
> + }
> +
> if (btrtl_dev->fw_len < 0) {
> rtl_dev_err(hdev, "firmware file %s not found",
> btrtl_dev->ic_info->fw_name);
> @@ -1491,4 +1510,5 @@ MODULE_FIRMWARE("rtl_bt/rtl8852bs_config.bin");
> MODULE_FIRMWARE("rtl_bt/rtl8852bu_fw.bin");
> MODULE_FIRMWARE("rtl_bt/rtl8852bu_config.bin");
> MODULE_FIRMWARE("rtl_bt/rtl8852cu_fw.bin");
> +MODULE_FIRMWARE("rtl_bt/rtl8852cu_fw_v2.bin");
> MODULE_FIRMWARE("rtl_bt/rtl8852cu_config.bin");
Attachment:
pgp4udTHRNUzF.pgp
Description: OpenPGP digital signature
