Hi Johan,
On Wed, 31 May 2023 at 14:35, Johan Hovold <johan+linaro@xxxxxxxxxx> wrote:
>
> Devices that lack persistent storage for the device address can indicate
> this by setting the HCI_QUIRK_INVALID_BDADDR which causes the controller
> to be marked as unconfigured until user space has set a valid address.
>
> The related HCI_QUIRK_USE_BDADDR_PROPERTY was later added to similarly
> indicate that the device lacks a valid address but that one may be
> specified in the devicetree.
>
> As is clear from commit 7a0e5b15ca45 ("Bluetooth: Add quirk for reading
> BD_ADDR from fwnode property") that added and documented this quirk and
> commits like de79a9df1692 ("Bluetooth: btqcomsmd: use
> HCI_QUIRK_USE_BDADDR_PROPERTY"), the device address of controllers with
> this flag should be treated as invalid until user space has had a chance
> to configure the controller in case the devicetree property is missing.
>
> As it does not make sense to allow controllers with invalid addresses,
> restore the original semantics, which also makes sure that the
> implementation is consistent (e.g. get_missing_options() indicates that
> the address must be set) and matches the documentation (including
> comments in the code, such as, "In case any of them is set, the
> controller has to start up as unconfigured.").
>
This patch broke Bluetooth on Dragonboard 845c (SDM845) devboard.
Reverting this patch fixes the BT breakage and I see the following
messages in dmesg:
Bluetooth: hci0: setting up wcn399x
Bluetooth: hci0: QCA Product ID :0x0000000a
Bluetooth: hci0: QCA SOC Version :0x40010214
Bluetooth: hci0: QCA ROM Version :0x00000201
Bluetooth: hci0: QCA Patch Version:0x00000001
Bluetooth: hci0: QCA controller version 0x02140201
Bluetooth: hci0: QCA Downloading qca/crbtfw21.tlv
Bluetooth: hci0: QCA Downloading qca/crnv21.bin
Bluetooth: hci0: QCA setup on UART is completed
Regards,
Amit Pundir
> Fixes: e668eb1e1578 ("Bluetooth: hci_core: Don't stop BT if the BD address missing in dts")
> Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
> ---
> net/bluetooth/hci_sync.c | 8 +++-----
> 1 file changed, 3 insertions(+), 5 deletions(-)
>
> diff --git a/net/bluetooth/hci_sync.c b/net/bluetooth/hci_sync.c
> index c2a805ee55cc..ce03038b3460 100644
> --- a/net/bluetooth/hci_sync.c
> +++ b/net/bluetooth/hci_sync.c
> @@ -4615,16 +4615,14 @@ static int hci_dev_setup_sync(struct hci_dev *hdev)
> * BD_ADDR invalid before creating the HCI device or in
> * its setup callback.
> */
> - invalid_bdaddr = test_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
> -
> + invalid_bdaddr = test_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks) ||
> + test_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks);
> if (!ret) {
> if (test_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks) &&
> !bacmp(&hdev->public_addr, BDADDR_ANY))
> hci_dev_get_bd_addr_from_property(hdev);
>
> - if ((invalid_bdaddr ||
> - test_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks)) &&
> - bacmp(&hdev->public_addr, BDADDR_ANY) &&
> + if (invalid_bdaddr && bacmp(&hdev->public_addr, BDADDR_ANY) &&
> hdev->set_bdaddr) {
> ret = hdev->set_bdaddr(hdev, &hdev->public_addr);
> if (!ret)
> --
> 2.39.3
>
