Re: [PATCH v7 2/3] Bluetooth: btmtk: introduce btmtk reset work

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Sean,

On Mon, Jun 26, 2023 at 1:41 PM <sean.wang@xxxxxxxxxxxx> wrote:
>
> From: Jing Cai <jing.cai@xxxxxxxxxxxx>
>
> Introduce btmtk_reset_work which can be called whenever the firmware abort,
> HCI command timeout, other fatal error happen.
>
> Co-developed-by: Chris Lu <chris.lu@xxxxxxxxxxxx>
> Signed-off-by: Chris Lu <chris.lu@xxxxxxxxxxxx>
> Co-developed-by: Sean Wang <sean.wang@xxxxxxxxxxxx>
> Signed-off-by: Sean Wang <sean.wang@xxxxxxxxxxxx>
> Signed-off-by: Jing Cai <jing.cai@xxxxxxxxxxxx>
> ---
> v2, v3, v4: rebase onto the latest codebase
> v5: reset the device on hdev basis and use hci_cmd_sync_queue to
>     schedule reset work
> v6 and v7: rebase onto the latest codebase
> ---
>  drivers/bluetooth/btmtk.c |  15 ++++
>  drivers/bluetooth/btmtk.h |   8 +++
>  drivers/bluetooth/btusb.c | 145 +++++++++++++++++++-------------------
>  3 files changed, 97 insertions(+), 71 deletions(-)
>
> diff --git a/drivers/bluetooth/btmtk.c b/drivers/bluetooth/btmtk.c
> index 9482401d97fa..b8678b75276e 100644
> --- a/drivers/bluetooth/btmtk.c
> +++ b/drivers/bluetooth/btmtk.c
> @@ -280,6 +280,21 @@ int btmtk_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
>  }
>  EXPORT_SYMBOL_GPL(btmtk_set_bdaddr);
>
> +void btmtk_reset_sync(struct hci_dev *hdev)
> +{
> +       struct btmediatek_data *reset_work = hci_get_priv(hdev);
> +       int err;
> +
> +       hci_dev_lock(hdev);
> +
> +       err = hci_cmd_sync_queue(hdev, reset_work->reset_sync, NULL, NULL);
> +       if (err)
> +               bt_dev_err(hdev, "failed to reset (%d)", err);
> +
> +       hci_dev_unlock(hdev);
> +}
> +EXPORT_SYMBOL_GPL(btmtk_reset_sync);
> +
>  MODULE_AUTHOR("Sean Wang <sean.wang@xxxxxxxxxxxx>");
>  MODULE_AUTHOR("Mark Chen <mark-yw.chen@xxxxxxxxxxxx>");
>  MODULE_DESCRIPTION("Bluetooth support for MediaTek devices ver " VERSION);
> diff --git a/drivers/bluetooth/btmtk.h b/drivers/bluetooth/btmtk.h
> index fadc1a520652..75d8e71efcd3 100644
> --- a/drivers/bluetooth/btmtk.h
> +++ b/drivers/bluetooth/btmtk.h
> @@ -120,8 +120,11 @@ struct btmtk_hci_wmt_params {
>         u32 *status;
>  };
>
> +typedef int (*btmtk_reset_sync_func_t)(struct hci_dev *, void *);
> +
>  struct btmediatek_data {
>         u32 dev_id;
> +       btmtk_reset_sync_func_t reset_sync;
>  };
>
>  typedef int (*wmt_cmd_sync_func_t)(struct hci_dev *,
> @@ -136,6 +139,8 @@ int btmtk_setup_firmware_79xx(struct hci_dev *hdev, const char *fwname,
>
>  int btmtk_setup_firmware(struct hci_dev *hdev, const char *fwname,
>                          wmt_cmd_sync_func_t wmt_cmd_sync);
> +
> +void btmtk_reset_sync(struct hci_dev *hdev);
>  #else
>
>  static inline int btmtk_set_bdaddr(struct hci_dev *hdev,
> @@ -156,4 +161,7 @@ static int btmtk_setup_firmware(struct hci_dev *hdev, const char *fwname,
>         return -EOPNOTSUPP;
>  }
>
> +static void btmtk_reset_sync(struct hci_dev *hdev)
> +{
> +}
>  #endif
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index 71b119bcff29..4ebab61c288c 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -3037,6 +3037,78 @@ static u32 btusb_mtk_reset_done(struct hci_dev *hdev)
>         return val & MTK_BT_RST_DONE;
>  }
>
> +static int btusb_mtk_reset_work(struct hci_dev *hdev, void *rst_data)

You can probably drop _work suffix since it no longer runs on its own
dedicated work.

> +{
> +       struct btusb_data *data = hci_get_drvdata(hdev);
> +       struct btmediatek_data *mediatek;
> +       u32 val;
> +       int err;
> +
> +       /* It's MediaTek specific bluetooth reset mechanism via USB */
> +       if (test_and_set_bit(BTUSB_HW_RESET_ACTIVE, &data->flags)) {
> +               bt_dev_err(hdev, "last reset failed? Not resetting again");
> +               return -EBUSY;
> +       }
> +
> +       err = usb_autopm_get_interface(data->intf);
> +       if (err < 0)
> +               return err;
> +
> +       btusb_stop_traffic(data);
> +       usb_kill_anchored_urbs(&data->tx_anchor);
> +       mediatek = hci_get_priv(hdev);
> +
> +       if (mediatek->dev_id == 0x7925) {
> +               btusb_mtk_uhw_reg_read(data, MTK_BT_RESET_REG_CONNV3, &val);
> +               val |= (1 << 5);
> +               btusb_mtk_uhw_reg_write(data, MTK_BT_RESET_REG_CONNV3, val);
> +               btusb_mtk_uhw_reg_read(data, MTK_BT_RESET_REG_CONNV3, &val);
> +               val &= 0xFFFF00FF;
> +               val |= (1 << 13);
> +               btusb_mtk_uhw_reg_write(data, MTK_BT_RESET_REG_CONNV3, val);
> +               btusb_mtk_uhw_reg_write(data, MTK_EP_RST_OPT, 0x00010001);
> +               btusb_mtk_uhw_reg_read(data, MTK_BT_RESET_REG_CONNV3, &val);
> +               val |= (1 << 0);
> +               btusb_mtk_uhw_reg_write(data, MTK_BT_RESET_REG_CONNV3, val);
> +               btusb_mtk_uhw_reg_write(data, MTK_UDMA_INT_STA_BT, 0x000000FF);
> +               btusb_mtk_uhw_reg_read(data, MTK_UDMA_INT_STA_BT, &val);
> +               btusb_mtk_uhw_reg_write(data, MTK_UDMA_INT_STA_BT1, 0x000000FF);
> +               btusb_mtk_uhw_reg_read(data, MTK_UDMA_INT_STA_BT1, &val);
> +               msleep(100);
> +       } else {
> +               /* It's Device EndPoint Reset Option Register */
> +               bt_dev_dbg(hdev, "Initiating reset mechanism via uhw");
> +               btusb_mtk_uhw_reg_write(data, MTK_EP_RST_OPT, MTK_EP_RST_IN_OUT_OPT);
> +               btusb_mtk_uhw_reg_read(data, MTK_BT_WDT_STATUS, &val);
> +
> +               /* Reset the bluetooth chip via USB interface. */
> +               btusb_mtk_uhw_reg_write(data, MTK_BT_SUBSYS_RST, 1);
> +               btusb_mtk_uhw_reg_write(data, MTK_UDMA_INT_STA_BT, 0x000000FF);
> +               btusb_mtk_uhw_reg_read(data, MTK_UDMA_INT_STA_BT, &val);
> +               btusb_mtk_uhw_reg_write(data, MTK_UDMA_INT_STA_BT1, 0x000000FF);
> +               btusb_mtk_uhw_reg_read(data, MTK_UDMA_INT_STA_BT1, &val);
> +               /* MT7921 need to delay 20ms between toggle reset bit */
> +               msleep(20);
> +               btusb_mtk_uhw_reg_write(data, MTK_BT_SUBSYS_RST, 0);
> +               btusb_mtk_uhw_reg_read(data, MTK_BT_SUBSYS_RST, &val);
> +       }
> +
> +       err = readx_poll_timeout(btusb_mtk_reset_done, hdev, val,
> +                                val & MTK_BT_RST_DONE, 20000, 1000000);
> +       if (err < 0)
> +               bt_dev_err(hdev, "Reset timeout");
> +
> +       btusb_mtk_id_get(data, 0x70010200, &val);
> +       if (!val)
> +               bt_dev_err(hdev, "Can't get device id, subsys reset fail.");
> +
> +       usb_queue_reset_device(data->intf);
> +
> +       clear_bit(BTUSB_HW_RESET_ACTIVE, &data->flags);
> +
> +       return err;
> +}
> +
>  static int btusb_mtk_setup(struct hci_dev *hdev)
>  {
>         struct btusb_data *data = hci_get_drvdata(hdev);
> @@ -3076,6 +3148,7 @@ static int btusb_mtk_setup(struct hci_dev *hdev)
>
>         mediatek = hci_get_priv(hdev);
>         mediatek->dev_id = dev_id;
> +       mediatek->reset_sync = btusb_mtk_reset_work;
>
>         switch (dev_id) {
>         case 0x7663:
> @@ -3233,76 +3306,6 @@ static int btusb_mtk_shutdown(struct hci_dev *hdev)
>         return 0;
>  }
>
> -static void btusb_mtk_cmd_timeout(struct hci_dev *hdev)
> -{
> -       struct btusb_data *data = hci_get_drvdata(hdev);
> -       u32 val;
> -       int err;
> -       struct btmediatek_data *mediatek;
> -
> -       /* It's MediaTek specific bluetooth reset mechanism via USB */
> -       if (test_and_set_bit(BTUSB_HW_RESET_ACTIVE, &data->flags)) {
> -               bt_dev_err(hdev, "last reset failed? Not resetting again");
> -               return;
> -       }
> -
> -       err = usb_autopm_get_interface(data->intf);
> -       if (err < 0)
> -               return;
> -
> -       btusb_stop_traffic(data);
> -       usb_kill_anchored_urbs(&data->tx_anchor);
> -       mediatek = hci_get_priv(hdev);
> -
> -       if (mediatek->dev_id == 0x7925) {
> -               btusb_mtk_uhw_reg_read(data, MTK_BT_RESET_REG_CONNV3, &val);
> -               val |= (1 << 5);
> -               btusb_mtk_uhw_reg_write(data, MTK_BT_RESET_REG_CONNV3, val);
> -               btusb_mtk_uhw_reg_read(data, MTK_BT_RESET_REG_CONNV3, &val);
> -               val &= 0xFFFF00FF;
> -               val |= (1 << 13);
> -               btusb_mtk_uhw_reg_write(data, MTK_BT_RESET_REG_CONNV3, val);
> -               btusb_mtk_uhw_reg_write(data, MTK_EP_RST_OPT, 0x00010001);
> -               btusb_mtk_uhw_reg_read(data, MTK_BT_RESET_REG_CONNV3, &val);
> -               val |= (1 << 0);
> -               btusb_mtk_uhw_reg_write(data, MTK_BT_RESET_REG_CONNV3, val);
> -               btusb_mtk_uhw_reg_write(data, MTK_UDMA_INT_STA_BT, 0x000000FF);
> -               btusb_mtk_uhw_reg_read(data, MTK_UDMA_INT_STA_BT, &val);
> -               btusb_mtk_uhw_reg_write(data, MTK_UDMA_INT_STA_BT1, 0x000000FF);
> -               btusb_mtk_uhw_reg_read(data, MTK_UDMA_INT_STA_BT1, &val);
> -               msleep(100);
> -       } else {
> -               /* It's Device EndPoint Reset Option Register */
> -               bt_dev_dbg(hdev, "Initiating reset mechanism via uhw");
> -               btusb_mtk_uhw_reg_write(data, MTK_EP_RST_OPT, MTK_EP_RST_IN_OUT_OPT);
> -               btusb_mtk_uhw_reg_read(data, MTK_BT_WDT_STATUS, &val);
> -
> -               /* Reset the bluetooth chip via USB interface. */
> -               btusb_mtk_uhw_reg_write(data, MTK_BT_SUBSYS_RST, 1);
> -               btusb_mtk_uhw_reg_write(data, MTK_UDMA_INT_STA_BT, 0x000000FF);
> -               btusb_mtk_uhw_reg_read(data, MTK_UDMA_INT_STA_BT, &val);
> -               btusb_mtk_uhw_reg_write(data, MTK_UDMA_INT_STA_BT1, 0x000000FF);
> -               btusb_mtk_uhw_reg_read(data, MTK_UDMA_INT_STA_BT1, &val);
> -               /* MT7921 need to delay 20ms between toggle reset bit */
> -               msleep(20);
> -               btusb_mtk_uhw_reg_write(data, MTK_BT_SUBSYS_RST, 0);
> -               btusb_mtk_uhw_reg_read(data, MTK_BT_SUBSYS_RST, &val);
> -       }
> -
> -       err = readx_poll_timeout(btusb_mtk_reset_done, hdev, val,
> -                                val & MTK_BT_RST_DONE, 20000, 1000000);
> -       if (err < 0)
> -               bt_dev_err(hdev, "Reset timeout");
> -
> -       btusb_mtk_id_get(data, 0x70010200, &val);
> -       if (!val)
> -               bt_dev_err(hdev, "Can't get device id, subsys reset fail.");
> -
> -       usb_queue_reset_device(data->intf);
> -
> -       clear_bit(BTUSB_HW_RESET_ACTIVE, &data->flags);
> -}
> -
>  static int btusb_recv_acl_mtk(struct hci_dev *hdev, struct sk_buff *skb)
>  {
>         struct btusb_data *data = hci_get_drvdata(hdev);
> @@ -4429,7 +4432,7 @@ static int btusb_probe(struct usb_interface *intf,
>                 hdev->setup = btusb_mtk_setup;
>                 hdev->shutdown = btusb_mtk_shutdown;
>                 hdev->manufacturer = 70;
> -               hdev->cmd_timeout = btusb_mtk_cmd_timeout;
> +               hdev->cmd_timeout = btmtk_reset_sync;
>                 hdev->set_bdaddr = btmtk_set_bdaddr;
>                 set_bit(HCI_QUIRK_BROKEN_ENHANCED_SETUP_SYNC_CONN, &hdev->quirks);
>                 set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks);
> --
> 2.25.1
>


-- 
Luiz Augusto von Dentz




[Index of Archives]     [Bluez Devel]     [Linux Wireless Networking]     [Linux Wireless Personal Area Networking]     [Linux ATH6KL]     [Linux USB Devel]     [Linux Media Drivers]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Big List of Linux Books]

  Powered by Linux