Re: [PATCH 2/4] bluetooth: qca: add support for WCN7850

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Luiz,

On 22/06/2023 21:54, Luiz Augusto von Dentz wrote:
Hi Neil

On Tue, Jun 20, 2023 at 8:43 AM Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> wrote:

On 20.06.2023 17:19, Neil Armstrong wrote:
Add support for the WCN7850 Bluetooth chipset.

Tested on the SM8550 QRD platform.

Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
---
I don't have comments for this patch specifically, but:


  drivers/bluetooth/btqca.c   |  7 +++++++
  drivers/bluetooth/btqca.h   | 10 ++++++++++
  drivers/bluetooth/hci_qca.c | 48 ++++++++++++++++++++++++++++++++++-----------
  3 files changed, 54 insertions(+), 11 deletions(-)

diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
index e7e58a956d15..037146b476ff 100644
--- a/drivers/bluetooth/btqca.c
+++ b/drivers/bluetooth/btqca.c
@@ -617,6 +617,9 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
       } else if (soc_type == QCA_WCN6855) {
               snprintf(config.fwname, sizeof(config.fwname),
                        "qca/hpbtfw%02x.tlv", rom_ver);
+     } else if (soc_type == QCA_WCN7850) {
+             snprintf(config.fwname, sizeof(config.fwname),
+                      "qca/hmtbtfw%02x.tlv", rom_ver);
       } else {
               snprintf(config.fwname, sizeof(config.fwname),
                        "qca/rampatch_%08x.bin", soc_ver);
@@ -654,6 +657,9 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
       else if (soc_type == QCA_WCN6855)
               snprintf(config.fwname, sizeof(config.fwname),
                        "qca/hpnv%02x.bin", rom_ver);
+     else if (soc_type == QCA_WCN7850)
+             snprintf(config.fwname, sizeof(config.fwname),
+                      "qca/hmtnv%02x.bin", rom_ver);
       else
               snprintf(config.fwname, sizeof(config.fwname),
                        "qca/nvm_%08x.bin", soc_ver);
The above changes should probably be made switch statements as well

@@ -695,6 +701,7 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
       case QCA_WCN3991:
       case QCA_WCN6750:
       case QCA_WCN6855:
+     case QCA_WCN7850:
               /* get fw build info */
               err = qca_read_fw_build_info(hdev);
               if (err < 0)
diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
index b884095bcd9d..ff1850e984fe 100644
--- a/drivers/bluetooth/btqca.h
+++ b/drivers/bluetooth/btqca.h
@@ -148,6 +148,7 @@ enum qca_btsoc_type {
       QCA_QCA6390,
       QCA_WCN6750,
       QCA_WCN6855,
+     QCA_WCN7850,
  };

  #if IS_ENABLED(CONFIG_BT_QCA)
@@ -173,6 +174,10 @@ static inline bool qca_is_wcn6855(enum qca_btsoc_type soc_type)
  {
       return soc_type == QCA_WCN6855;
  }
+static inline bool qca_is_wcn7850(enum qca_btsoc_type soc_type)
+{
+     return soc_type == QCA_WCN7850;
+}

  #else

@@ -216,6 +221,11 @@ static inline bool qca_is_wcn6855(enum qca_btsoc_type soc_type)
       return false;
  }

+static inline bool qca_is_wcn7850(enum qca_btsoc_type soc_type)
+{
+     return false;
+}
+
  static inline int qca_send_pre_shutdown_cmd(struct hci_dev *hdev)
  {
       return -EOPNOTSUPP;
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index e30c979535b1..49b8d75d271e 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -1322,7 +1322,8 @@ static int qca_set_baudrate(struct hci_dev *hdev, uint8_t baudrate)
       /* Give the controller time to process the request */
       if (qca_is_wcn399x(qca_soc_type(hu)) ||
           qca_is_wcn6750(qca_soc_type(hu)) ||
-         qca_is_wcn6855(qca_soc_type(hu)))
+         qca_is_wcn6855(qca_soc_type(hu)) ||
+         qca_is_wcn7850(qca_soc_type(hu)))
               usleep_range(1000, 10000);
Separate topic, but I see usages of the helper and raw comparisons
everywhere.. I'd vote for switch everywhere

+1, most of the time it is preferable to go with switches which makes
the code cleaner/more readable, Im fine not requiring it in this set
but I hope someone looks into doing some cleanup in this code.

Since we have time until the end of the v6.5 merge window I'll add an intermediate
change adding switch/case for v2.

Thanks,
Neil


Konrad
       else
               msleep(300);
@@ -1400,7 +1401,8 @@ static int qca_check_speeds(struct hci_uart *hu)
  {
       if (qca_is_wcn399x(qca_soc_type(hu)) ||
           qca_is_wcn6750(qca_soc_type(hu)) ||
-         qca_is_wcn6855(qca_soc_type(hu))) {
+         qca_is_wcn6855(qca_soc_type(hu)) ||
+         qca_is_wcn7850(qca_soc_type(hu))) {
               if (!qca_get_speed(hu, QCA_INIT_SPEED) &&
                   !qca_get_speed(hu, QCA_OPER_SPEED))
                       return -EINVAL;
@@ -1435,7 +1437,8 @@ static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)
                */
               if (qca_is_wcn399x(soc_type) ||
                   qca_is_wcn6750(soc_type) ||
-                 qca_is_wcn6855(soc_type))
+                 qca_is_wcn6855(soc_type) ||
+                 qca_is_wcn7850(soc_type))
                       hci_uart_set_flow_control(hu, true);

               if (soc_type == QCA_WCN3990) {
@@ -1454,7 +1457,8 @@ static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)
  error:
               if (qca_is_wcn399x(soc_type) ||
                   qca_is_wcn6750(soc_type) ||
-                 qca_is_wcn6855(soc_type))
+                 qca_is_wcn6855(soc_type) ||
+                 qca_is_wcn7850(soc_type))
                       hci_uart_set_flow_control(hu, false);

               if (soc_type == QCA_WCN3990) {
@@ -1691,7 +1695,8 @@ static int qca_power_on(struct hci_dev *hdev)

       if (qca_is_wcn399x(soc_type) ||
           qca_is_wcn6750(soc_type) ||
-         qca_is_wcn6855(soc_type)) {
+         qca_is_wcn6855(soc_type) ||
+         qca_is_wcn7850(soc_type)) {
               ret = qca_regulator_init(hu);
       } else {
               qcadev = serdev_device_get_drvdata(hu->serdev);
@@ -1733,7 +1738,8 @@ static int qca_setup(struct hci_uart *hu)
       bt_dev_info(hdev, "setting up %s",
               qca_is_wcn399x(soc_type) ? "wcn399x" :
               (soc_type == QCA_WCN6750) ? "wcn6750" :
-             (soc_type == QCA_WCN6855) ? "wcn6855" : "ROME/QCA6390");
+             (soc_type == QCA_WCN6855) ? "wcn6855" :
+             (soc_type == QCA_WCN7850) ? "wcn7850" : "ROME/QCA6390");

       qca->memdump_state = QCA_MEMDUMP_IDLE;

@@ -1746,7 +1752,8 @@ static int qca_setup(struct hci_uart *hu)

       if (qca_is_wcn399x(soc_type) ||
           qca_is_wcn6750(soc_type) ||
-         qca_is_wcn6855(soc_type)) {
+         qca_is_wcn6855(soc_type) ||
+         qca_is_wcn7850(soc_type)) {
               set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks);
               hci_set_aosp_capable(hdev);

@@ -1769,7 +1776,8 @@ static int qca_setup(struct hci_uart *hu)

       if (!(qca_is_wcn399x(soc_type) ||
             qca_is_wcn6750(soc_type) ||
-           qca_is_wcn6855(soc_type))) {
+           qca_is_wcn6855(soc_type) ||
+           qca_is_wcn7850(soc_type))) {
               /* Get QCA version information */
               ret = qca_read_soc_version(hdev, &ver, soc_type);
               if (ret)
@@ -1909,6 +1917,20 @@ static const struct qca_device_data qca_soc_data_wcn6855 __maybe_unused = {
       .capabilities = QCA_CAP_WIDEBAND_SPEECH | QCA_CAP_VALID_LE_STATES,
  };

+static const struct qca_device_data qca_soc_data_wcn7850 __maybe_unused = {
+     .soc_type = QCA_WCN7850,
+     .vregs = (struct qca_vreg []) {
+             { "vddio", 5000 },
+             { "vddaon", 26000 },
+             { "vdddig", 126000 },
+             { "vddrfa0p8", 102000 },
+             { "vddrfa1p2", 257000 },
+             { "vddrfa1p9", 302000 },
+     },
+     .num_vregs = 6,
+     .capabilities = QCA_CAP_WIDEBAND_SPEECH | QCA_CAP_VALID_LE_STATES,
+};
+
  static void qca_power_shutdown(struct hci_uart *hu)
  {
       struct qca_serdev *qcadev;
@@ -2074,7 +2096,8 @@ static int qca_serdev_probe(struct serdev_device *serdev)
       if (data &&
           (qca_is_wcn399x(data->soc_type) ||
            qca_is_wcn6750(data->soc_type) ||
-          qca_is_wcn6855(data->soc_type))) {
+          qca_is_wcn6855(data->soc_type) ||
+          qca_is_wcn7850(data->soc_type))) {
               qcadev->btsoc_type = data->soc_type;
               qcadev->bt_power = devm_kzalloc(&serdev->dev,
                                               sizeof(struct qca_power),
@@ -2105,7 +2128,8 @@ static int qca_serdev_probe(struct serdev_device *serdev)
                                              GPIOD_IN);
               if (IS_ERR_OR_NULL(qcadev->sw_ctrl) &&
                   (data->soc_type == QCA_WCN6750 ||
-                  data->soc_type == QCA_WCN6855))
+                  data->soc_type == QCA_WCN6855 ||
+                  data->soc_type == QCA_WCN7850))
                       dev_warn(&serdev->dev, "failed to acquire SW_CTRL gpio\n");

               qcadev->susclk = devm_clk_get_optional(&serdev->dev, NULL);
@@ -2182,7 +2206,8 @@ static void qca_serdev_remove(struct serdev_device *serdev)

       if ((qca_is_wcn399x(qcadev->btsoc_type) ||
            qca_is_wcn6750(qcadev->btsoc_type) ||
-          qca_is_wcn6855(qcadev->btsoc_type)) &&
+          qca_is_wcn6855(qcadev->btsoc_type) ||
+          qca_is_wcn7850(qcadev->btsoc_type)) &&
           power->vregs_on)
               qca_power_shutdown(&qcadev->serdev_hu);
       else if (qcadev->susclk)
@@ -2368,6 +2393,7 @@ static const struct of_device_id qca_bluetooth_of_match[] = {
       { .compatible = "qcom,wcn3998-bt", .data = &qca_soc_data_wcn3998},
       { .compatible = "qcom,wcn6750-bt", .data = &qca_soc_data_wcn6750},
       { .compatible = "qcom,wcn6855-bt", .data = &qca_soc_data_wcn6855},
+     { .compatible = "qcom,wcn7850-bt", .data = &qca_soc_data_wcn7850},
       { /* sentinel */ }
  };
  MODULE_DEVICE_TABLE(of, qca_bluetooth_of_match);








[Index of Archives]     [Bluez Devel]     [Linux Wireless Networking]     [Linux Wireless Personal Area Networking]     [Linux ATH6KL]     [Linux USB Devel]     [Linux Media Drivers]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Big List of Linux Books]

  Powered by Linux