Hi Luiz,
ti, 2023-06-13 kello 12:38 -0700, Luiz Augusto von Dentz kirjoitti:
> Hi Pauli,
>
> On Tue, Jun 13, 2023 at 12:04 PM Luiz Augusto von Dentz
> <luiz.dentz@xxxxxxxxx> wrote:
> >
> > Hi Pauli,
> >
> > On Tue, Jun 13, 2023 at 11:17 AM Pauli Virtanen <pav@xxxxxx> wrote:
> > >
> > > hci_update_accept_list_sync iterates over hdev->pend_le_conns and
> > > hdev->pend_le_reports, and waits for controller events in the loop body,
> > > without holding hdev lock.
> > >
> > > Meanwhile, these lists and the items may be modified e.g. by
> > > le_scan_cleanup. This can invalidate the list cursor in the ongoing
> > > iterations, resulting to invalid behavior (eg use-after-free).
> > >
> > > Use RCU for the hci_conn_params action lists. Since the loop bodies in
> > > hci_sync block and we cannot use RCU for the whole loop, add
> > > hci_conn_params.add_pending to keep track which items are left. Copy
> > > data to avoid needing lock on hci_conn_params. Only the flags field is
> > > written from elsewhere, so READ_ONCE/WRITE_ONCE should guarantee we read
> > > valid values.
> > >
> > > Free params everywhere with hci_conn_params_free so the cleanup is
> > > guaranteed to be done properly.
> > >
> > > This fixes the following, which can be triggered at least by changing
> > > hci_le_set_cig_params to always return false, and running BlueZ
> > > iso-tester, which causes connections to be created and dropped fast:
> > >
> > > ==================================================================
> > > BUG: KASAN: slab-use-after-free in hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841)
> > > Read of size 8 at addr ffff888001265018 by task kworker/u3:0/32
> > >
> > > Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014
> > > Workqueue: hci0 hci_cmd_sync_work
> > > Call Trace:
> > > <TASK>
> > > dump_stack_lvl (./arch/x86/include/asm/irqflags.h:134 lib/dump_stack.c:107)
> > > print_report (mm/kasan/report.c:320 mm/kasan/report.c:430)
> > > ? __virt_addr_valid (./include/linux/mmzone.h:1915 ./include/linux/mmzone.h:2011 arch/x86/mm/physaddr.c:65)
> > > ? hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841)
> > > kasan_report (mm/kasan/report.c:538)
> > > ? hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841)
> > > hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841)
> > > ? __pfx_hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2780)
> > > ? mutex_lock (kernel/locking/mutex.c:282)
> > > ? __pfx_mutex_lock (kernel/locking/mutex.c:282)
> > > ? __pfx_mutex_unlock (kernel/locking/mutex.c:538)
> > > ? __pfx_update_passive_scan_sync (net/bluetooth/hci_sync.c:2861)
> > > hci_cmd_sync_work (net/bluetooth/hci_sync.c:306)
> > > process_one_work (./arch/x86/include/asm/preempt.h:27 kernel/workqueue.c:2399)
> > > worker_thread (./include/linux/list.h:292 kernel/workqueue.c:2538)
> > > ? __pfx_worker_thread (kernel/workqueue.c:2480)
> > > kthread (kernel/kthread.c:376)
> > > ? __pfx_kthread (kernel/kthread.c:331)
> > > ret_from_fork (arch/x86/entry/entry_64.S:314)
> > > </TASK>
> > >
> > > Allocated by task 31:
> > > kasan_save_stack (mm/kasan/common.c:46)
> > > kasan_set_track (mm/kasan/common.c:52)
> > > __kasan_kmalloc (mm/kasan/common.c:374 mm/kasan/common.c:383)
> > > hci_conn_params_add (./include/linux/slab.h:580 ./include/linux/slab.h:720 net/bluetooth/hci_core.c:2277)
> > > hci_connect_le_scan (net/bluetooth/hci_conn.c:1419 net/bluetooth/hci_conn.c:1589)
> > > hci_connect_cis (net/bluetooth/hci_conn.c:2266)
> > > iso_connect_cis (net/bluetooth/iso.c:390)
> > > iso_sock_connect (net/bluetooth/iso.c:899)
> > > __sys_connect (net/socket.c:2003 net/socket.c:2020)
> > > __x64_sys_connect (net/socket.c:2027)
> > > do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
> > > entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
> > >
> > > Freed by task 15:
> > > kasan_save_stack (mm/kasan/common.c:46)
> > > kasan_set_track (mm/kasan/common.c:52)
> > > kasan_save_free_info (mm/kasan/generic.c:523)
> > > __kasan_slab_free (mm/kasan/common.c:238 mm/kasan/common.c:200 mm/kasan/common.c:244)
> > > __kmem_cache_free (mm/slub.c:1807 mm/slub.c:3787 mm/slub.c:3800)
> > > hci_conn_params_del (net/bluetooth/hci_core.c:2323)
> > > le_scan_cleanup (net/bluetooth/hci_conn.c:202)
> > > process_one_work (./arch/x86/include/asm/preempt.h:27 kernel/workqueue.c:2399)
> > > worker_thread (./include/linux/list.h:292 kernel/workqueue.c:2538)
> > > kthread (kernel/kthread.c:376)
> > > ret_from_fork (arch/x86/entry/entry_64.S:314)
> > > ==================================================================
> > >
> > > Fixes: e8907f76544f ("Bluetooth: hci_sync: Make use of hci_cmd_sync_queue set 3")
> > > Signed-off-by: Pauli Virtanen <pav@xxxxxx>
> > > ---
> > >
> > > Notes:
> > > v2: use RCU
> >
> > Really nice work.
> >
> > > include/net/bluetooth/hci_core.h | 5 ++
> > > net/bluetooth/hci_conn.c | 9 ++--
> > > net/bluetooth/hci_core.c | 34 +++++++++---
> > > net/bluetooth/hci_event.c | 12 ++---
> > > net/bluetooth/hci_sync.c | 93 ++++++++++++++++++++++++++++----
> > > net/bluetooth/mgmt.c | 30 +++++------
> > > 6 files changed, 141 insertions(+), 42 deletions(-)
> > >
> > > diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
> > > index 683666ea210c..8c6ac6d29c62 100644
> > > --- a/include/net/bluetooth/hci_core.h
> > > +++ b/include/net/bluetooth/hci_core.h
> > > @@ -822,6 +822,8 @@ struct hci_conn_params {
> > >
> > > struct hci_conn *conn;
> > > bool explicit_connect;
> > > + /* Accessed without hdev->lock: */
> > > + bool add_pending;
> >
> > That is the only part that Im a little uncorfortable with, are we
> > doing this because we can't do use the cmd_sync while holding RCU
> > lock? In that case couldn't we perhaps update the list? Also we could
> > perhaps add it as a flag rather than a separated field.
Yes, it is because we have to release the rcu read lock while doing
__hci_cmd_sync_sk, and when we'd like to re-lock to continue the
iteration we can't know if the current pointer we have is still valid
and points to the same object (also if same address appears in list it
might be different object).
At the moment I'm not seeing how to iterate over this in principle
arbitrarily mutating list, without either marking the list entries in
one way or another in the iteration, or having some more lifetime
guarantees for them.
The marker could be a flag, but would maybe need atomic ops if the flag
field is written concurrently also from elsewhere if we want to be 100%
sure...
A problem with modifying the list (ie using action field to track
iteration status) is that in other parts things are looked up with
hci_pend_le_action_lookup so the items can't be moved away from it
temporarily (which otherwise would probably work here).
> > > hci_conn_flags_t flags;
> > > u8 privacy_mode;
> > > };
> > > @@ -1605,6 +1607,9 @@ struct hci_conn_params *hci_conn_params_add(struct hci_dev *hdev,
> > > bdaddr_t *addr, u8 addr_type);
> > > void hci_conn_params_del(struct hci_dev *hdev, bdaddr_t *addr, u8 addr_type);
> > > void hci_conn_params_clear_disabled(struct hci_dev *hdev);
> > > +void hci_conn_params_free(struct hci_conn_params *param);
> > > +void hci_conn_params_set_pending(struct hci_conn_params *param,
> > > + struct list_head *list);
> > >
> > > struct hci_conn_params *hci_pend_le_action_lookup(struct list_head *list,
> > > bdaddr_t *addr,
> > > diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
> > > index 7d4941e6dbdf..ae9a35d1405b 100644
> > > --- a/net/bluetooth/hci_conn.c
> > > +++ b/net/bluetooth/hci_conn.c
> > > @@ -118,7 +118,7 @@ static void hci_connect_le_scan_cleanup(struct hci_conn *conn, u8 status)
> > > */
> > > params->explicit_connect = false;
> > >
> > > - list_del_init(¶ms->action);
> > > + hci_conn_params_set_pending(params, NULL);
> > >
> > > switch (params->auto_connect) {
> > > case HCI_AUTO_CONN_EXPLICIT:
> > > @@ -127,10 +127,10 @@ static void hci_connect_le_scan_cleanup(struct hci_conn *conn, u8 status)
> > > return;
> > > case HCI_AUTO_CONN_DIRECT:
> > > case HCI_AUTO_CONN_ALWAYS:
> > > - list_add(¶ms->action, &hdev->pend_le_conns);
> > > + hci_conn_params_set_pending(params, &hdev->pend_le_conns);
> > > break;
> > > case HCI_AUTO_CONN_REPORT:
> > > - list_add(¶ms->action, &hdev->pend_le_reports);
> > > + hci_conn_params_set_pending(params, &hdev->pend_le_reports);
> > > break;
> > > default:
> > > break;
> > > @@ -1435,8 +1435,7 @@ static int hci_explicit_conn_params_set(struct hci_dev *hdev,
> > > if (params->auto_connect == HCI_AUTO_CONN_DISABLED ||
> > > params->auto_connect == HCI_AUTO_CONN_REPORT ||
> > > params->auto_connect == HCI_AUTO_CONN_EXPLICIT) {
> > > - list_del_init(¶ms->action);
> > > - list_add(¶ms->action, &hdev->pend_le_conns);
> > > + hci_conn_params_set_pending(params, &hdev->pend_le_conns);
> >
> > Id just follow the name convention e.g. hci_conn_params_list_add,
> > hci_conn_params_list_del, etc.
Ok. hci_conn_params are also in the different hdev->le_conn_params
list, maybe hci_pend_le_list_add, hci_pend_le_list_del_init
> >
> > > }
> > >
> > > params->explicit_connect = true;
> > > diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
> > > index 48917c68358d..7992a61fe1fd 100644
> > > --- a/net/bluetooth/hci_core.c
> > > +++ b/net/bluetooth/hci_core.c
> > > @@ -2249,21 +2249,41 @@ struct hci_conn_params *hci_conn_params_lookup(struct hci_dev *hdev,
> > > return NULL;
> > > }
> > >
> > > -/* This function requires the caller holds hdev->lock */
> > > +/* This function requires the caller holds hdev->lock or rcu_read_lock */
> > > struct hci_conn_params *hci_pend_le_action_lookup(struct list_head *list,
> > > bdaddr_t *addr, u8 addr_type)
> > > {
> > > struct hci_conn_params *param;
> > >
> > > - list_for_each_entry(param, list, action) {
> > > + rcu_read_lock();
> > > +
> > > + list_for_each_entry_rcu(param, list, action) {
> > > if (bacmp(¶m->addr, addr) == 0 &&
> > > - param->addr_type == addr_type)
> > > + param->addr_type == addr_type) {
> > > + rcu_read_unlock();
> > > return param;
> > > + }
> > > }
> > >
> > > + rcu_read_unlock();
> > > +
> > > return NULL;
> > > }
> > >
> > > +/* This function requires the caller holds hdev->lock */
> > > +void hci_conn_params_set_pending(struct hci_conn_params *param,
> > > + struct list_head *list)
> > > +{
> > > + if (!list_empty(¶m->action)) {
> > > + list_del_rcu(¶m->action);
> > > + synchronize_rcu();
> > > + INIT_LIST_HEAD(¶m->action);
> > > + }
> > > +
> > > + if (list)
> > > + list_add_rcu(¶m->action, list);
> > > +}
> > > +
> > > /* This function requires the caller holds hdev->lock */
> > > struct hci_conn_params *hci_conn_params_add(struct hci_dev *hdev,
> > > bdaddr_t *addr, u8 addr_type)
> > > @@ -2297,14 +2317,15 @@ struct hci_conn_params *hci_conn_params_add(struct hci_dev *hdev,
> > > return params;
> > > }
> > >
> > > -static void hci_conn_params_free(struct hci_conn_params *params)
> > > +void hci_conn_params_free(struct hci_conn_params *params)
> > > {
> > > + hci_conn_params_set_pending(params, NULL);
> > > +
> > > if (params->conn) {
> > > hci_conn_drop(params->conn);
> > > hci_conn_put(params->conn);
> > > }
> > >
> > > - list_del(¶ms->action);
> > > list_del(¶ms->list);
> > > kfree(params);
> > > }
> > > @@ -2342,8 +2363,7 @@ void hci_conn_params_clear_disabled(struct hci_dev *hdev)
> > > continue;
> > > }
> > >
> > > - list_del(¶ms->list);
> > > - kfree(params);
> > > + hci_conn_params_free(params);
> > > }
> > >
> > > BT_DBG("All LE disabled connection parameters were removed");
> > > diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
> > > index 7c199f7361f7..8187c9f827fa 100644
> > > --- a/net/bluetooth/hci_event.c
> > > +++ b/net/bluetooth/hci_event.c
> > > @@ -1564,7 +1564,7 @@ static u8 hci_cc_le_set_privacy_mode(struct hci_dev *hdev, void *data,
> > >
> > > params = hci_conn_params_lookup(hdev, &cp->bdaddr, cp->bdaddr_type);
> > > if (params)
> > > - params->privacy_mode = cp->mode;
> > > + WRITE_ONCE(params->privacy_mode, cp->mode);
> > >
> > > hci_dev_unlock(hdev);
> > >
> > > @@ -2804,8 +2804,8 @@ static void hci_cs_disconnect(struct hci_dev *hdev, u8 status)
> > >
> > > case HCI_AUTO_CONN_DIRECT:
> > > case HCI_AUTO_CONN_ALWAYS:
> > > - list_del_init(¶ms->action);
> > > - list_add(¶ms->action, &hdev->pend_le_conns);
> > > + hci_conn_params_set_pending(params,
> > > + &hdev->pend_le_conns);
> > > break;
> > >
> > > default:
> > > @@ -3423,8 +3423,8 @@ static void hci_disconn_complete_evt(struct hci_dev *hdev, void *data,
> > >
> > > case HCI_AUTO_CONN_DIRECT:
> > > case HCI_AUTO_CONN_ALWAYS:
> > > - list_del_init(¶ms->action);
> > > - list_add(¶ms->action, &hdev->pend_le_conns);
> > > + hci_conn_params_set_pending(params,
> > > + &hdev->pend_le_conns);
> > > hci_update_passive_scan(hdev);
> > > break;
> > >
> > > @@ -5972,7 +5972,7 @@ static void le_conn_complete_evt(struct hci_dev *hdev, u8 status,
> > > params = hci_pend_le_action_lookup(&hdev->pend_le_conns, &conn->dst,
> > > conn->dst_type);
> > > if (params) {
> > > - list_del_init(¶ms->action);
> > > + hci_conn_params_set_pending(params, NULL);
> > > if (params->conn) {
> > > hci_conn_drop(params->conn);
> > > hci_conn_put(params->conn);
> > > diff --git a/net/bluetooth/hci_sync.c b/net/bluetooth/hci_sync.c
> > > index 97da5bcaa904..da12e286ee64 100644
> > > --- a/net/bluetooth/hci_sync.c
> > > +++ b/net/bluetooth/hci_sync.c
> > > @@ -2160,15 +2160,23 @@ static int hci_le_del_accept_list_sync(struct hci_dev *hdev,
> > > return 0;
> > > }
> > >
> > > +struct conn_params {
> > > + bdaddr_t addr;
> > > + u8 addr_type;
> > > + hci_conn_flags_t flags;
> > > + u8 privacy_mode;
> > > +};
> > > +
> > > /* Adds connection to resolve list if needed.
> > > * Setting params to NULL programs local hdev->irk
> > > */
> > > static int hci_le_add_resolve_list_sync(struct hci_dev *hdev,
> > > - struct hci_conn_params *params)
> > > + struct conn_params *params)
> > > {
> > > struct hci_cp_le_add_to_resolv_list cp;
> > > struct smp_irk *irk;
> > > struct bdaddr_list_with_irk *entry;
> > > + struct hci_conn_params *p;
> > >
> > > if (!use_ll_privacy(hdev))
> > > return 0;
> > > @@ -2203,6 +2211,16 @@ static int hci_le_add_resolve_list_sync(struct hci_dev *hdev,
> > > /* Default privacy mode is always Network */
> > > params->privacy_mode = HCI_NETWORK_PRIVACY;
> > >
> > > + rcu_read_lock();
> > > + p = hci_pend_le_action_lookup(&hdev->pend_le_conns,
> > > + ¶ms->addr, params->addr_type);
> > > + if (!p)
> > > + p = hci_pend_le_action_lookup(&hdev->pend_le_reports,
> > > + ¶ms->addr, params->addr_type);
> > > + if (p)
> > > + WRITE_ONCE(p->privacy_mode, HCI_NETWORK_PRIVACY);
> > > + rcu_read_unlock();
> > > +
> > > done:
> > > if (hci_dev_test_flag(hdev, HCI_PRIVACY))
> > > memcpy(cp.local_irk, hdev->irk, 16);
> > > @@ -2215,7 +2233,7 @@ static int hci_le_add_resolve_list_sync(struct hci_dev *hdev,
> > >
> > > /* Set Device Privacy Mode. */
> > > static int hci_le_set_privacy_mode_sync(struct hci_dev *hdev,
> > > - struct hci_conn_params *params)
> > > + struct conn_params *params)
> > > {
> > > struct hci_cp_le_set_privacy_mode cp;
> > > struct smp_irk *irk;
> > > @@ -2240,6 +2258,8 @@ static int hci_le_set_privacy_mode_sync(struct hci_dev *hdev,
> > > bacpy(&cp.bdaddr, &irk->bdaddr);
> > > cp.mode = HCI_DEVICE_PRIVACY;
> > >
> > > + /* Note: params->privacy_mode is not updated since it is a copy */
> > > +
> > > return __hci_cmd_sync_status(hdev, HCI_OP_LE_SET_PRIVACY_MODE,
> > > sizeof(cp), &cp, HCI_CMD_TIMEOUT);
> > > }
> > > @@ -2249,7 +2269,7 @@ static int hci_le_set_privacy_mode_sync(struct hci_dev *hdev,
> > > * properly set the privacy mode.
> > > */
> > > static int hci_le_add_accept_list_sync(struct hci_dev *hdev,
> > > - struct hci_conn_params *params,
> > > + struct conn_params *params,
> > > u8 *num_entries)
> > > {
> > > struct hci_cp_le_add_to_accept_list cp;
> > > @@ -2447,6 +2467,51 @@ struct sk_buff *hci_read_local_oob_data_sync(struct hci_dev *hdev,
> > > return __hci_cmd_sync_sk(hdev, opcode, 0, NULL, 0, HCI_CMD_TIMEOUT, sk);
> > > }
> > >
> > > +static void conn_params_add_iter_init(struct list_head *list)
> > > +{
> > > + struct hci_conn_params *params;
> > > +
> > > + rcu_read_lock();
> > > +
> > > + list_for_each_entry_rcu(params, list, action)
> > > + params->add_pending = true;
> > > +
> > > + rcu_read_unlock();
> > > +}
> > > +
> > > +static bool conn_params_add_iter_next(struct list_head *list,
> > > + struct conn_params *item)
> > > +{
> > > + struct hci_conn_params *params;
> > > +
> > > + rcu_read_lock();
> > > +
> > > + list_for_each_entry_rcu(params, list, action) {
> > > + if (!params->add_pending)
> > > + continue;
> > > +
> > > + /* No hdev->lock, but: addr, addr_type are immutable.
> > > + * privacy_mode is only written by us or in
> > > + * hci_cc_le_set_privacy_mode that we wait for.
> > > + * We should be idempotent so MGMT updating flags
> > > + * while we are processing is OK.
> > > + */
> > > + bacpy(&item->addr, ¶ms->addr);
> > > + item->addr_type = params->addr_type;
> > > + item->flags = READ_ONCE(params->flags);
> > > + item->privacy_mode = READ_ONCE(params->privacy_mode);
> > > +
> > > + params->add_pending = false;
> > > +
> > > + rcu_read_unlock();
> > > + return true;
> > > + }
> > > +
> > > + rcu_read_unlock();
> > > +
> > > + return false;
> > > +}
> > > +
> > > /* Device must not be scanning when updating the accept list.
> > > *
> > > * Update is done using the following sequence:
> > > @@ -2466,7 +2531,7 @@ struct sk_buff *hci_read_local_oob_data_sync(struct hci_dev *hdev,
> > > */
> > > static u8 hci_update_accept_list_sync(struct hci_dev *hdev)
> > > {
> > > - struct hci_conn_params *params;
> > > + struct conn_params params;
> > > struct bdaddr_list *b, *t;
> > > u8 num_entries = 0;
> > > bool pend_conn, pend_report;
> > > @@ -2504,6 +2569,7 @@ static u8 hci_update_accept_list_sync(struct hci_dev *hdev)
> > > if (hci_conn_hash_lookup_le(hdev, &b->bdaddr, b->bdaddr_type))
> > > continue;
> > >
> > > + /* Pointers not dereferenced, no locks needed */
> > > pend_conn = hci_pend_le_action_lookup(&hdev->pend_le_conns,
> > > &b->bdaddr,
> > > b->bdaddr_type);
> > > @@ -2532,9 +2598,15 @@ static u8 hci_update_accept_list_sync(struct hci_dev *hdev)
> > > * available accept list entries in the controller, then
> > > * just abort and return filer policy value to not use the
> > > * accept list.
> > > + *
> > > + * The list and params may be mutated while we wait for events,
> > > + * so use special iteration with copies.
> > > */
> > > - list_for_each_entry(params, &hdev->pend_le_conns, action) {
> > > - err = hci_le_add_accept_list_sync(hdev, params, &num_entries);
> > > +
> > > + conn_params_add_iter_init(&hdev->pend_le_conns);
> > > +
> > > + while (conn_params_add_iter_next(&hdev->pend_le_conns, ¶ms)) {
> > > + err = hci_le_add_accept_list_sync(hdev, ¶ms, &num_entries);
> > > if (err)
> > > goto done;
>
> Perhaps we should be using list_for_each_entry_continue_rcu instead of
> creating our own version of it? Or at least use it internally on
> iter_next, anyway I think what we are after is some way to do
> rcu_unlock add_to_list rcu_lock on a loop.
I think list_for_each_entry_continue_rcu differs from
list_for_each_entry_rcu in that it doesn't start from the list head.
IIUC it requires starting from a valid list entry, and needs holding
the rcu read lock all the time, to ensure it is not invalidated. If so,
it seems it can't be used here since we need to release the lock and
the cursor might be gone before we re-lock.
> > > }
> > > @@ -2543,8 +2615,11 @@ static u8 hci_update_accept_list_sync(struct hci_dev *hdev)
> > > * the list of pending reports and also add these to the
> > > * accept list if there is still space. Abort if space runs out.
> > > */
> > > - list_for_each_entry(params, &hdev->pend_le_reports, action) {
> > > - err = hci_le_add_accept_list_sync(hdev, params, &num_entries);
> > > +
> > > + conn_params_add_iter_init(&hdev->pend_le_reports);
> > > +
> > > + while (conn_params_add_iter_next(&hdev->pend_le_reports, ¶ms)) {
> > > + err = hci_le_add_accept_list_sync(hdev, ¶ms, &num_entries);
> > > if (err)
> > > goto done;
> > > }
> > > @@ -4837,12 +4912,12 @@ static void hci_pend_le_actions_clear(struct hci_dev *hdev)
> > > struct hci_conn_params *p;
> > >
> > > list_for_each_entry(p, &hdev->le_conn_params, list) {
> > > + hci_conn_params_set_pending(p, NULL);
> > > if (p->conn) {
> > > hci_conn_drop(p->conn);
> > > hci_conn_put(p->conn);
> > > p->conn = NULL;
> > > }
> > > - list_del_init(&p->action);
> > > }
> > >
> > > BT_DBG("All LE pending actions cleared");
> > > diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c
> > > index 61c8e1b8f3b0..b35b1c685b86 100644
> > > --- a/net/bluetooth/mgmt.c
> > > +++ b/net/bluetooth/mgmt.c
> > > @@ -1303,15 +1303,15 @@ static void restart_le_actions(struct hci_dev *hdev)
> > > /* Needed for AUTO_OFF case where might not "really"
> > > * have been powered off.
> > > */
> > > - list_del_init(&p->action);
> > > + hci_conn_params_set_pending(p, NULL);
> > >
> > > switch (p->auto_connect) {
> > > case HCI_AUTO_CONN_DIRECT:
> > > case HCI_AUTO_CONN_ALWAYS:
> > > - list_add(&p->action, &hdev->pend_le_conns);
> > > + hci_conn_params_set_pending(p, &hdev->pend_le_conns);
> > > break;
> > > case HCI_AUTO_CONN_REPORT:
> > > - list_add(&p->action, &hdev->pend_le_reports);
> > > + hci_conn_params_set_pending(p, &hdev->pend_le_reports);
> > > break;
> > > default:
> > > break;
> > > @@ -5175,7 +5175,7 @@ static int set_device_flags(struct sock *sk, struct hci_dev *hdev, void *data,
> > > goto unlock;
> > > }
> > >
> > > - params->flags = current_flags;
> > > + WRITE_ONCE(params->flags, current_flags);
> > > status = MGMT_STATUS_SUCCESS;
> > >
> > > /* Update passive scan if HCI_CONN_FLAG_DEVICE_PRIVACY
> > > @@ -7586,7 +7586,7 @@ static int hci_conn_params_set(struct hci_dev *hdev, bdaddr_t *addr,
> > > if (params->auto_connect == auto_connect)
> > > return 0;
> > >
> > > - list_del_init(¶ms->action);
> > > + hci_conn_params_set_pending(params, NULL);
> > >
> > > switch (auto_connect) {
> > > case HCI_AUTO_CONN_DISABLED:
> > > @@ -7595,18 +7595,22 @@ static int hci_conn_params_set(struct hci_dev *hdev, bdaddr_t *addr,
> > > * connect to device, keep connecting.
> > > */
> > > if (params->explicit_connect)
> > > - list_add(¶ms->action, &hdev->pend_le_conns);
> > > + hci_conn_params_set_pending(params,
> > > + &hdev->pend_le_conns);
> > > break;
> > > case HCI_AUTO_CONN_REPORT:
> > > if (params->explicit_connect)
> > > - list_add(¶ms->action, &hdev->pend_le_conns);
> > > + hci_conn_params_set_pending(params,
> > > + &hdev->pend_le_conns);
> > > else
> > > - list_add(¶ms->action, &hdev->pend_le_reports);
> > > + hci_conn_params_set_pending(params,
> > > + &hdev->pend_le_reports);
> > > break;
> > > case HCI_AUTO_CONN_DIRECT:
> > > case HCI_AUTO_CONN_ALWAYS:
> > > if (!is_connected(hdev, addr, addr_type))
> > > - list_add(¶ms->action, &hdev->pend_le_conns);
> > > + hci_conn_params_set_pending(params,
> > > + &hdev->pend_le_conns);
> > > break;
> > > }
> > >
> > > @@ -7829,9 +7833,7 @@ static int remove_device(struct sock *sk, struct hci_dev *hdev,
> > > goto unlock;
> > > }
> > >
> > > - list_del(¶ms->action);
> > > - list_del(¶ms->list);
> > > - kfree(params);
> > > + hci_conn_params_free(params);
> > >
> > > device_removed(sk, hdev, &cp->addr.bdaddr, cp->addr.type);
> > > } else {
> > > @@ -7862,9 +7864,7 @@ static int remove_device(struct sock *sk, struct hci_dev *hdev,
> > > p->auto_connect = HCI_AUTO_CONN_EXPLICIT;
> > > continue;
> > > }
> > > - list_del(&p->action);
> > > - list_del(&p->list);
> > > - kfree(p);
> > > + hci_conn_params_free(p);
> > > }
> > >
> > > bt_dev_dbg(hdev, "All LE connection parameters were removed");
> > > --
> > > 2.40.1
> > >
> >
> >
> > --
> > Luiz Augusto von Dentz
>
>
>
