Re: [BlueZ,v3,1/2] test-runner: revert udevd and audio support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

ke, 2023-05-17 kello 14:50 -0700, Luiz Augusto von Dentz kirjoitti:
> Hi Pauli,
> 
> On Wed, May 17, 2023 at 2:43 PM Pauli Virtanen <pav@xxxxxx> wrote:
> > 
> > ke, 2023-05-17 kello 14:25 -0700, Luiz Augusto von Dentz kirjoitti:
> > > Hi Pauli,
> > > 
> > > On Wed, May 17, 2023 at 2:16 PM Pauli Virtanen <pav@xxxxxx> wrote:
> > > > 
> > > > Hi Luiz,
> > > > 
> > > > ke, 2023-05-17 kello 13:53 -0700, Luiz Augusto von Dentz kirjoitti:
> > > > > Hi Pauli,
> > > > > 
> > > > > On Wed, May 17, 2023 at 1:30 PM Pauli Virtanen <pav@xxxxxx> wrote:
> > > > > > 
> > > > > > Hi Luiz,
> > > > > > 
> > > > > > ke, 2023-05-17 kello 12:34 -0700, Luiz Augusto von Dentz kirjoitti:
> > > > > > > Hi Pauli,
> > > > > > > 
> > > > > > > On Mon, May 15, 2023 at 1:30 PM Pauli Virtanen <pav@xxxxxx> wrote:
> > > > > > > > 
> > > > > > > > Hi Luiz,
> > > > > > > > 
> > > > > > > > ma, 2023-05-15 kello 13:01 -0700, Luiz Augusto von Dentz kirjoitti:
> > > > > > > > > Hi Pauli,
> > > > > > > > > 
> > > > > > > > > On Sat, May 13, 2023 at 10:41 AM <bluez.test.bot@xxxxxxxxx> wrote:
> > > > > > > > > > 
> > > > > > > > > > This is automated email and please do not reply to this email!
> > > > > > > > > > 
> > > > > > > > > > Dear submitter,
> > > > > > > > > > 
> > > > > > > > > > Thank you for submitting the patches to the linux bluetooth mailing list.
> > > > > > > > > > This is a CI test results with your patch series:
> > > > > > > > > > PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=747273
> > > > > > > > > > 
> > > > > > > > > > ---Test result---
> > > > > > > > > > 
> > > > > > > > > > Test Summary:
> > > > > > > > > > CheckPatch                    FAIL      1.14 seconds
> > > > > > > > > > GitLint                       PASS      0.52 seconds
> > > > > > > > > > BuildEll                      PASS      26.21 seconds
> > > > > > > > > > BluezMake                     PASS      745.32 seconds
> > > > > > > > > > MakeCheck                     PASS      11.04 seconds
> > > > > > > > > > MakeDistcheck                 PASS      151.18 seconds
> > > > > > > > > > CheckValgrind                 PASS      243.86 seconds
> > > > > > > > > > CheckSmatch                   PASS      326.99 seconds
> > > > > > > > > > bluezmakeextell               PASS      98.83 seconds
> > > > > > > > > > IncrementalBuild              PASS      1262.88 seconds
> > > > > > > > > > ScanBuild                     WARNING   964.73 seconds
> > > > > > > > > > 
> > > > > > > > > > Details
> > > > > > > > > > ##############################
> > > > > > > > > > Test: CheckPatch - FAIL
> > > > > > > > > > Desc: Run checkpatch.pl script
> > > > > > > > > > Output:
> > > > > > > > > > [BlueZ,v3,1/2] test-runner: revert udevd and audio support
> > > > > > > > > > WARNING:UNKNOWN_COMMIT_ID: Unknown commit id '91a48af52efb0751fab396b2b9026c9186b10b88', maybe rebased or not pulled?
> > > > > > > > > > #49:
> > > > > > > > > > This reverts commit 91a48af52efb0751fab396b2b9026c9186b10b88
> > > > > > > > > > 
> > > > > > > > > > WARNING:UNKNOWN_COMMIT_ID: Unknown commit id 'e20e7e0b05c7edb74255c9b092916ac5bb99c97f', maybe rebased or not pulled?
> > > > > > > > > > #50:
> > > > > > > > > > This reverts commit e20e7e0b05c7edb74255c9b092916ac5bb99c97f
> > > > > > > > > > 
> > > > > > > > > > /github/workspace/src/src/13240258.patch total: 0 errors, 2 warnings, 193 lines checked
> > > > > > > > > > 
> > > > > > > > > > NOTE: For some of the reported defects, checkpatch may be able to
> > > > > > > > > >       mechanically convert to the typical style using --fix or --fix-inplace.
> > > > > > > > > > 
> > > > > > > > > > /github/workspace/src/src/13240258.patch has style problems, please review.
> > > > > > > > > > 
> > > > > > > > > > NOTE: Ignored message types: COMMIT_MESSAGE COMPLEX_MACRO CONST_STRUCT FILE_PATH_CHANGES MISSING_SIGN_OFF PREFER_PACKED SPDX_LICENSE_TAG SPLIT_STRING SSCANF_TO_KSTRTO
> > > > > > > > > > 
> > > > > > > > > > NOTE: If any of the errors are false positives, please report
> > > > > > > > > >       them to the maintainer, see CHECKPATCH in MAINTAINERS.
> > > > > > > > > > 
> > > > > > > > > > 
> > > > > > > > > > ##############################
> > > > > > > > > > Test: ScanBuild - WARNING
> > > > > > > > > > Desc: Run Scan Build
> > > > > > > > > > Output:
> > > > > > > > > > tools/test-runner.c:924:2: warning: 2nd function call argument is an uninitialized value
> > > > > > > > > >         printf("Running command %s\n", cmdname ? cmdname : argv[0]);
> > > > > > > > > >         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > > > > > > > > > 1 warning generated.
> > > > > > > > > > 
> > > > > > > > > > 
> > > > > > > > > > 
> > > > > > > > > > ---
> > > > > > > > > > Regards,
> > > > > > > > > > Linux Bluetooth
> > > > > > > > > 
> > > > > > > > > I tried running on fedora but it looks like something is missing in my setup:
> > > > > > > > > 
> > > > > > > > > [E][00003.767959] spa.dbus     | [          dbus.c:  329
> > > > > > > > > impl_connection_get()] Failed to connect to session bus: Unable to
> > > > > > > > > autolaun1
> > > > > > > > > [E][00003.769967] mod.portal   | [ module-portal.c:  326
> > > > > > > > > pipewire__module_init()] Failed to connect to session bus:
> > > > > > > > > Input/output error
> > > > > > > > 
> > > > > > > > I have those two "errors" too, they should be harmless as the xdg-
> > > > > > > > desktop-portal module is optional. With `test-runner -d -l -A` you
> > > > > > > > should get the Bluetooth endpoints to appear.
> > > > > > > > 
> > > > > > > > Removing the mod.portal from the configuration can't be done with drop-
> > > > > > > > in config files currently, and I didn't want to include a full config
> > > > > > > > file here as it has some tens of lines of mandatory boilerplate.
> > > > > > > 
> > > > > > > Ok, looks like it configuring the endpoints:
> > > > > > > 
> > > > > > > https://gist.github.com/Vudentz/0d8851e719affd9f2dc1f4081ce32fb7
> > > > > > > 
> > > > > > > That said I probably need to compile pipewire from source in order to
> > > > > > > have the LE Audio endpoints registered, btw do you have any
> > > > > > > instructions on how to build it, do I need to build wireplumber as
> > > > > > > well?
> > > > > > 
> > > > > > Should be along these lines to install under $PWD/install and enable
> > > > > > BAP parts:
> > > > > > 
> > > > > > git clone https://gitlab.freedesktop.org/pipewire/pipewire.git
> > > > > > cd pipewire
> > > > > > LDFLAGS="-Wl,-rpath=$PWD/install/lib64" \
> > > > > >    meson setup builddir --prefix=$PWD/install \
> > > > > >        -Dsystemd-user-service=disabled \
> > > > > >        -Dudevrulesdir=$PWD/install/lib/udev/rules.d \
> > > > > >        -Dbluez5-codec-lc3=enabled
> > > > > > meson install -C builddir
> > > > > > 
> > > > > > Meson will clone and install Wireplumber too. Turning experimental on
> > > > > > in src/main.conf and it should give
> > > > > > 
> > > > > > $ ./tools/test-runner -d -l --audio=/home/pauli/tmp/pipewire/install/bin/pipewire -k../linux/arch/x86_64/boot/bzImage sleep 5
> > > > > > ...
> > > > > > bluetoothd[29]: profiles/audio/media.c:endpoint_init_pac() PAC :1.1:/MediaEndpointLE/BAPSource/lc3 registered
> > > > > > bluetoothd[29]: Endpoint registered: sender=:1.1 path=/MediaEndpointLE/BAPSource/lc3
> > > > > > bluetoothd[29]: profiles/audio/media.c:client_ready_cb() Media application registered: :1.1:/MediaEndpointLE
> > > > > > ...
> > > > > 
> > > > > Thanks, something is not quite right for me since I don't see any
> > > > > objects on MediaEndpointLE:
> > > > > 
> > > > > https://gist.github.com/Vudentz/242e4e2bfb8907acfdfdf18b458eec1d
> > > > 
> > > > It gets "No object received" when trying to register the BAP
> > > > application, so probably the LC3 codec is missing somehow.
> > > > 
> > > > meson setup should have reported
> > > > "Bluetooth audio codecs ... LC3 : YES".
> > > 
> > > Yep, that shows as enabled.
> > > 
> > > > `ldd install/bin/pipewire` should link to libpipewire-0.3.so.0 under
> > > > the install/ prefix and not to system lib. If not, the rpath in
> > > > compilation accordingly should be adjusted accordingly, or set
> > > > LD_LIBRARY_PATH there.
> > > 
> > > libpipewire-0.3.so.0 =>
> > > /home/vudentz/git/pipewire/install/lib64/libpipewire-0.3.so.0
> > > (0x00007f3b8e947000)
> > > 
> > > > Also the codec plugin
> > > > install/lib64/spa-0.2/bluez5/libspa-codec-bluez5-lc3.so should exist.
> > > 
> > > -rwxr-xr-x. 1 **** **** 166592 May 17 13:39
> > > install/lib64/spa-0.2/bluez5/libspa-codec-bluez5-lc3.so
> > 
> > Does `ldd libspa-codec-bluez5-lc3.so` show it finds liblc3.so?
> 
> I guess we found the problem:
> 
>     liblc3.so.1 => not found
> 
> > > Perhaps we need to enable more debugs for pipewire to sort this out?
> > 
> > ./tools/test-runner -d -l --audio=/home/pauli/tmp/pipewire/install/bin/pipewire -k../linux/arch/x86_64/boot/bzImage -- /bin/bash
> > ... inside vm: ...
> > pkill wireplumber
> > export XDG_CONFIG_HOME=/run/conf
> > export XDG_STATE_HOME=/run
> > export XDG_RUNTIME_DIR=/run
> > export WIREPLUMBER_DEBUG=4
> > /home/pauli/tmp/pipewire/install/bin/wireplumber
> > 
> > should spit out what it tried to do.
> 
> Yep, here is the full trace:
> 
> https://gist.github.com/Vudentz/36f9acdc62b623c85e978883ea29c2d3
> 
> But I think the problem is with the linking of liblc3, are you running
> with the latest from git? Perhaps I need to install it also in the
> same path?

Copying liblc3.so* under install/lib64/ probably works since rpath is
set there. Or maybe /usr/local if not.

I've been running on some older liblc3 git version, but current liblc3
git 1.0.3 also works.

-- 
Pauli Virtanen



[Index of Archives]     [Bluez Devel]     [Linux Wireless Networking]     [Linux Wireless Personal Area Networking]     [Linux ATH6KL]     [Linux USB Devel]     [Linux Media Drivers]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Big List of Linux Books]

  Powered by Linux