RE: [PATCH v3] Bluetooth: hci_qca: Add support for Qualcomm Bluetooth SoC QCA2066

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Paul :
  Thanks for comments, please see inline comments.

-----Original Message-----
From: Paul Menzel <pmenzel@xxxxxxxxxxxxx> 
Sent: Tuesday, May 16, 2023 7:00 PM
To: Tim Jiang (QUIC) <quic_tjiang@xxxxxxxxxxx>
Cc: marcel@xxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; linux-bluetooth@xxxxxxxxxxxxxxx; linux-arm-msm@xxxxxxxxxxxxxxx; Balakrishna Godavarthi (QUIC) <quic_bgodavar@xxxxxxxxxxx>; Hemant Gupta (QUIC) <quic_hemantg@xxxxxxxxxxx>; mka@xxxxxxxxxxxx
Subject: Re: [PATCH v3] Bluetooth: hci_qca: Add support for Qualcomm Bluetooth SoC QCA2066

Dear Tim,


Thank you for your patch.

Am 16.05.23 um 12:41 schrieb Tim Jiang:
> This patch adds support for QCA2066 firmware patch and nvm downloading.

Could you please elaborate, what new features are needed for this as you add common functions?

Please document the datasheet.
[Tim] no new feature, only support new chip qca2066 btfw downloading

> Signed-off-by: Tim Jiang <quic_tjiang@xxxxxxxxxxx>
> ---
>   drivers/bluetooth/btqca.c   | 77 ++++++++++++++++++++++++++++++++++++-
>   drivers/bluetooth/btqca.h   |  4 ++
>   drivers/bluetooth/hci_qca.c |  8 +++-
>   3 files changed, 87 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c 
> index fd0941fe8608..bd028387cd02 100644
> --- a/drivers/bluetooth/btqca.c
> +++ b/drivers/bluetooth/btqca.c
> @@ -205,6 +205,48 @@ static int qca_send_reset(struct hci_dev *hdev)
>   	return 0;
>   }
>   
> +static int qca_read_fw_board_id(struct hci_dev *hdev, u16 *bid) {
> +	u8 cmd;
> +	struct sk_buff *skb;
> +	struct edl_event_hdr *edl;
> +	int err = 0;
> +	int bid_len;
> +
> +	bt_dev_dbg(hdev, "QCA read board ID");
> +
> +	cmd = EDL_GET_BID_REQ_CMD;
> +	skb = __hci_cmd_sync_ev(hdev, EDL_PATCH_CMD_OPCODE, EDL_PATCH_CMD_LEN,
> +				&cmd, 0, HCI_INIT_TIMEOUT);
> +	if (IS_ERR(skb)) {
> +		err = PTR_ERR(skb);
> +		bt_dev_err(hdev, "Reading QCA board ID failed (%d)", err);
> +		return err;
> +	}
> +
> +	edl = skb_pull_data(skb, sizeof(*edl));
> +	if (!edl) {
> +		bt_dev_err(hdev, "QCA read board ID with no header");
> +		err = -EILSEQ;
> +		goto out;
> +	}
> +
> +	if (edl->cresp != EDL_CMD_REQ_RES_EVT ||
> +	    edl->rtype != EDL_GET_BID_REQ_CMD) {
> +		bt_dev_err(hdev, "QCA Wrong packet: %d %d", edl->cresp, edl->rtype);
> +		err = -EIO;
> +		goto out;
> +	}
> +
> +	bid_len = edl->data[0];
> +	*bid = (edl->data[1] << 8) + edl->data[2];
> +	bt_dev_info(hdev, "%s: bid len = %x, bid = %x", __func__, bid_len, 
> +*bid);
> +
> +out:
> +	kfree_skb(skb);
> +	return err;
> +}
> +
>   int qca_send_pre_shutdown_cmd(struct hci_dev *hdev)
>   {
>   	struct sk_buff *skb;
> @@ -574,6 +616,30 @@ int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr)
>   }
>   EXPORT_SYMBOL_GPL(qca_set_bdaddr_rome);
>   
> +static void qca_generate_nvm_name(struct hci_dev *hdev, char *fwname,
> +		   size_t max_size, struct qca_btsoc_version ver, u16 bid) {
> +	u8 rom_ver = 0;
> +	u32 soc_ver;

Any reason to fix the size of the variables?
[Tim] sorry , I does not got your point

> +	const char *variant;
> +
> +	soc_ver = get_soc_ver(ver.soc_id, ver.rom_ver);
> +	rom_ver = ((soc_ver & 0x00000f00) >> 0x04) | (soc_ver & 0x0000000f);
> +
> +	if ((ver.soc_id & 0x0000ff00) == QCA_HSP_GF_SOC_ID)  /* hsp gf chip */
> +		variant = "g";
> +	else
> +		variant = "";
> +
> +	if (bid == 0x0)
> +		snprintf(fwname, max_size, "qca/hpnv%02x%s.bin", rom_ver, variant);
> +	else
> +		snprintf(fwname, max_size, "qca/hpnv%02x%s.%x",
> +				rom_ver, variant, bid);

Use consistent line wrapping?
[Tim] will resolve in v4 version


> +
> +	bt_dev_info(hdev, "%s: nvm name is %s", __func__, fwname); }
> +
>   int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
>   		   enum qca_btsoc_type soc_type, struct qca_btsoc_version ver,
>   		   const char *firmware_name)
> @@ -582,6 +648,7 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
>   	int err;
>   	u8 rom_ver = 0;
>   	u32 soc_ver;
> +	u16 boardid = 0;
>   
>   	bt_dev_dbg(hdev, "QCA setup on UART");
>   
> @@ -604,6 +671,9 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
>   	if (qca_is_wcn399x(soc_type)) {
>   		snprintf(config.fwname, sizeof(config.fwname),
>   			 "qca/crbtfw%02x.tlv", rom_ver);
> +	} else if (soc_type == QCA_QCA2066) {
> +		snprintf(config.fwname, sizeof(config.fwname),
> +			 "qca/hpbtfw%02x.tlv", rom_ver);
>   	} else if (soc_type == QCA_QCA6390) {
>   		snprintf(config.fwname, sizeof(config.fwname),
>   			 "qca/htbtfw%02x.tlv", rom_ver);
> @@ -631,6 +701,9 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
>   	/* Give the controller some time to get ready to receive the NVM */
>   	msleep(10);
>   
> +	if (soc_type == QCA_QCA2066)
> +		qca_read_fw_board_id(hdev, &boardid);
> +
>   	/* Download NVM configuration */
>   	config.type = TLV_TYPE_NVM;
>   	if (firmware_name)
> @@ -644,7 +717,9 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
>   			snprintf(config.fwname, sizeof(config.fwname),
>   				 "qca/crnv%02x.bin", rom_ver);
>   		}
> -	}
> +	} else if (soc_type == QCA_QCA2066)
> +		qca_generate_nvm_name(hdev, config.fwname, sizeof(config.fwname),
> +				ver, boardid);

The coding style requires { } around branches, once it’s used in any branch.
[Tim] will addressed it in v4 version

>   	else if (soc_type == QCA_QCA6390)
>   		snprintf(config.fwname, sizeof(config.fwname),
>   			 "qca/htnv%02x.bin", rom_ver);
> diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h 
> index b884095bcd9d..7c9b3464ae4a 100644
> --- a/drivers/bluetooth/btqca.h
> +++ b/drivers/bluetooth/btqca.h
> @@ -13,6 +13,7 @@
>   #define EDL_PATCH_TLV_REQ_CMD		(0x1E)
>   #define EDL_GET_BUILD_INFO_CMD		(0x20)
>   #define EDL_NVM_ACCESS_SET_REQ_CMD	(0x01)
> +#define EDL_GET_BID_REQ_CMD		(0x23)
>   #define EDL_PATCH_CONFIG_CMD		(0x28)
>   #define MAX_SIZE_PER_TLV_SEGMENT	(243)
>   #define QCA_PRE_SHUTDOWN_CMD		(0xFC08)
> @@ -48,6 +49,8 @@
>   
>   #define QCA_FW_BUILD_VER_LEN		255
>   
> +#define QCA_HSP_GF_SOC_ID		0x1200
> +
>   
>   enum qca_baudrate {
>   	QCA_BAUDRATE_115200 	= 0,
> @@ -145,6 +148,7 @@ enum qca_btsoc_type {
>   	QCA_WCN3990,
>   	QCA_WCN3998,
>   	QCA_WCN3991,
> +	QCA_QCA2066,
>   	QCA_QCA6390,
>   	QCA_WCN6750,
>   	QCA_WCN6855,
> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c 
> index 1b064504b388..ec24ce451568 100644
> --- a/drivers/bluetooth/hci_qca.c
> +++ b/drivers/bluetooth/hci_qca.c
> @@ -1729,7 +1729,7 @@ static int qca_setup(struct hci_uart *hu)
>   	bt_dev_info(hdev, "setting up %s",
>   		qca_is_wcn399x(soc_type) ? "wcn399x" :
>   		(soc_type == QCA_WCN6750) ? "wcn6750" :
> -		(soc_type == QCA_WCN6855) ? "wcn6855" : "ROME/QCA6390");
> +		(soc_type == QCA_WCN6855) ? "wcn6855" : "ROME/QCA6390/QCA2066");
>   
>   	qca->memdump_state = QCA_MEMDUMP_IDLE;
>   
> @@ -1874,6 +1874,11 @@ static const struct qca_device_data qca_soc_data_qca6390 __maybe_unused = {
>   	.num_vregs = 0,
>   };
>   
> +static const struct qca_device_data qca_soc_data_qca2066 = {
> +	.soc_type = QCA_QCA2066,
> +	.num_vregs = 0,
> +};
> +
>   static const struct qca_device_data qca_soc_data_wcn6750 __maybe_unused = {
>   	.soc_type = QCA_WCN6750,
>   	.vregs = (struct qca_vreg []) {
> @@ -2364,6 +2369,7 @@ static const struct of_device_id qca_bluetooth_of_match[] = {
>   	{ .compatible = "qcom,wcn3998-bt", .data = &qca_soc_data_wcn3998},
>   	{ .compatible = "qcom,wcn6750-bt", .data = &qca_soc_data_wcn6750},
>   	{ .compatible = "qcom,wcn6855-bt", .data = &qca_soc_data_wcn6855},
> +	{ .compatible = "qcom,qca2066-bt", .data = &qca_soc_data_qca2066},

Sort it?
[Tim] it have been sorted or please guide me how to sort it ?

>   	{ /* sentinel */ }
>   };
>   MODULE_DEVICE_TABLE(of, qca_bluetooth_of_match);


Kind regards,

Paul




[Index of Archives]     [Bluez Devel]     [Linux Wireless Networking]     [Linux Wireless Personal Area Networking]     [Linux ATH6KL]     [Linux USB Devel]     [Linux Media Drivers]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Big List of Linux Books]

  Powered by Linux