Re: [PATCH 2/3] Bluetooth: btrtl: Add support for RTL8822BS UART

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Le 14/05/2023 à 09:47, Rudi Heitbaum a écrit :
Add a RTL8822BS UART with hci_ver = 0x07. This is similar to RTL8822CS
observed on the Tanix TX6 Android set-top box. But the previous
generation of chip. The RTL8822BS requires the
BROKEN_LOCAL_EXT_FEATURES_PAGE_2 quirk.

Signed-off-by: Rudi Heitbaum <rudi-8t6dWLoy+3lWk0Htik3J/w@xxxxxxxxxxxxxxxx>
---
  drivers/bluetooth/btrtl.c  | 12 +++++++++++-
  drivers/bluetooth/hci_h5.c |  6 ++++++
  2 files changed, 17 insertions(+), 1 deletion(-)

diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
index 2915c82d719d..b53a4ef88550 100644
--- a/drivers/bluetooth/btrtl.c
+++ b/drivers/bluetooth/btrtl.c
@@ -234,7 +234,15 @@ static const struct id_table ic_id_table[] = {
  	  .fw_name  = "rtl_bt/rtl8822cu_fw.bin",
  	  .cfg_name = "rtl_bt/rtl8822cu_config" },
- /* 8822B */
+	/* 8822BS with UART interface */
+	{ IC_INFO(RTL_ROM_LMP_8822B, 0xb, 0x7, HCI_UART),
+	  .config_needed = true,
+	  .has_rom_version = true,
+	  .has_msft_ext = true,
+	  .fw_name  = "rtl_bt/rtl8822bs_fw.bin",
+	  .cfg_name = "rtl_bt/rtl8822bs_config" },
+
+	/* 8822BU with USB interface */
  	{ IC_INFO(RTL_ROM_LMP_8822B, 0xb, 0x7, HCI_USB),
  	  .config_needed = true,
  	  .has_rom_version = true,
@@ -1182,6 +1190,8 @@ void btrtl_set_quirks(struct hci_dev *hdev, struct btrtl_device_info *btrtl_dev)
hci_set_aosp_capable(hdev);
  		break;
+	case CHIP_ID_8822B:
+		set_bit(HCI_QUIRK_BROKEN_LOCAL_EXT_FEATURES_PAGE_2, &hdev->quirks);

break missing?
If it is intentinal, a "fallthrough;" would be more explicit.

just my 2c,

CJ

  	default:
  		rtl_dev_dbg(hdev, "Central-peripheral role not enabled.");
  		rtl_dev_dbg(hdev, "WBS supported not enabled.");
diff --git a/drivers/bluetooth/hci_h5.c b/drivers/bluetooth/hci_h5.c
index fefc37b98b4a..726b6c7e28b8 100644
--- a/drivers/bluetooth/hci_h5.c
+++ b/drivers/bluetooth/hci_h5.c
@@ -1072,6 +1072,10 @@ static struct h5_vnd rtl_vnd = {
  	.acpi_gpio_map	= acpi_btrtl_gpios,
  };
+static const struct h5_device_data h5_data_rtl8822bs = {
+	.vnd = &rtl_vnd,
+};
+
  static const struct h5_device_data h5_data_rtl8822cs = {
  	.vnd = &rtl_vnd,
  };
@@ -1100,6 +1104,8 @@ static const struct dev_pm_ops h5_serdev_pm_ops = {
static const struct of_device_id rtl_bluetooth_of_match[] = {
  #ifdef CONFIG_BT_HCIUART_RTL
+	{ .compatible = "realtek,rtl8822bs-bt",
+	  .data = (const void *)&h5_data_rtl8822bs },
  	{ .compatible = "realtek,rtl8822cs-bt",
  	  .data = (const void *)&h5_data_rtl8822cs },
  	{ .compatible = "realtek,rtl8723bs-bt",




[Index of Archives]     [Bluez Devel]     [Linux Wireless Networking]     [Linux Wireless Personal Area Networking]     [Linux ATH6KL]     [Linux USB Devel]     [Linux Media Drivers]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Big List of Linux Books]

  Powered by Linux