Add support in the btqca/hci_qca driver for the WCN3988 and add it to the sm7225 Fairphone 4 devicetree. Devicetree patches go via Qualcomm tree, the rest via their respective trees. -- Previously with the RFC version I've had problems before with Bluetooth scanning failing like the following: [bluetooth]# scan on Failed to start discovery: org.bluez.Error.InProgress [ 202.371374] Bluetooth: hci0: Opcode 0x200b failed: -16 This appears to only happen with driver built-in (=y) when the supported local commands list doesn't get updated in the Bluetooth core and use_ext_scan() returning false. I'll try to submit this separately since this now works well enough with =m. But in both cases (=y, =m) it's behaving a bit weirdly before (re-)setting the MAC address with "sudo btmgmt public-addr fo:oo:ba:ar" Signed-off-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx> --- Changes in v2: - Add pinctrl & 'tlmm 64' irq to uart node - Pick up tags - Link to v1: https://lore.kernel.org/r/20230421-fp4-bluetooth-v1-0-0430e3a7e0a2@xxxxxxxxxxxxx --- Luca Weiss (4): dt-bindings: net: qualcomm: Add WCN3988 Bluetooth: btqca: Add WCN3988 support arm64: dts: qcom: sm6350: add uart1 node arm64: dts: qcom: sm7225-fairphone-fp4: Add Bluetooth .../bindings/net/bluetooth/qualcomm-bluetooth.yaml | 2 + arch/arm64/boot/dts/qcom/sm6350.dtsi | 63 +++++++++++++ arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts | 103 +++++++++++++++++++++ drivers/bluetooth/btqca.c | 13 ++- drivers/bluetooth/btqca.h | 12 ++- drivers/bluetooth/hci_qca.c | 12 +++ 6 files changed, 201 insertions(+), 4 deletions(-) --- base-commit: f2fe50eb7ca6b7bc6c63745f5c26f7c6022fcd4a change-id: 20230421-fp4-bluetooth-b36a0e87b9c8 Best regards, -- Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
