Hi Pauli, On Thu, Apr 6, 2023 at 1:14 PM Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx> wrote: > > Hi Pauli, > > On Thu, Apr 6, 2023 at 11:08 AM Pauli Virtanen <pav@xxxxxx> wrote: > > > > Hi Luiz, > > > > ke, 2023-04-05 kello 17:16 -0700, Luiz Augusto von Dentz kirjoitti: > > > Hi Pauli, > > > > > > On Mon, Mar 13, 2023 at 6:05 PM Pauli Virtanen <pav@xxxxxx> wrote: > > > > > > > > 14. maaliskuuta 2023 2.18.21 GMT+02:00 Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx> kirjoitti: > > > > > Hi Pauli, > > > > > > > > > > On Mon, Mar 13, 2023 at 4:30 PM Pauli Virtanen <pav@xxxxxx> wrote: > > > > > > > > > > > > Hi, > > > > > > > > > > > > su, 2023-03-12 kello 22:36 -0700, Luiz Augusto von Dentz kirjoitti: > > > > > > > Hi Pauli, Frederic, > > > > > > > > > > > > > > On Fri, Mar 10, 2023 at 4:40 PM <patchwork-bot+bluetooth@xxxxxxxxxx> wrote: > > > > > > > > > > > > > > > > Hello: > > > > > > > > > > > > > > > > This series was applied to bluetooth/bluez.git (master) > > > > > > > > by Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx>: > > > > > > > > > > > > > > > > On Tue, 7 Mar 2023 14:24:11 -0800 you wrote: > > > > > > > > > From: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> > > > > > > > > > > > > > > > > > > This adds bt_crypto_sirk which attempts to generate a unique SIRK using > > > > > > > > > the following steps: > > > > > > > > > > > > > > > > > > - Generate a hash (k) using the str as input > > > > > > > > > - Generate a hash (sirk) using vendor, product, version and source as input > > > > > > > > > - Encrypt sirk using k as LTK with sef function. > > > > > > > > > > > > > > > > > > [...] > > > > > > > > > > > > > > > > Here is the summary with links: > > > > > > > > - [RFC,v2,01/12] shared/crypto: Add bt_crypto_sirk > > > > > > > > https://git.kernel.org/pub/scm/bluetooth/bluez.git/?id=c1dd94cc7f81 > > > > > > > > - [RFC,v2,02/12] shared/ad: Add RSI data type > > > > > > > > https://git.kernel.org/pub/scm/bluetooth/bluez.git/?id=c2e99aefd337 > > > > > > > > - [RFC,v2,03/12] doc: Add set-api > > > > > > > > https://git.kernel.org/pub/scm/bluetooth/bluez.git/?id=6477522e92e3 > > > > > > > > - [RFC,v2,04/12] device-api: Add Set property > > > > > > > > https://git.kernel.org/pub/scm/bluetooth/bluez.git/?id=5bac4cddb191 > > > > > > > > - [RFC,v2,05/12] core: Add initial implementation of DeviceSet interface > > > > > > > > (no matching commit) > > > > > > > > - [RFC,v2,06/12] core: Check if device has RSI > > > > > > > > https://git.kernel.org/pub/scm/bluetooth/bluez.git/?id=f95ffcc8b1fe > > > > > > > > - [RFC,v2,07/12] main.conf: Add CSIP profile configurable options > > > > > > > > (no matching commit) > > > > > > > > - [RFC,v2,08/12] shared/csip: Add initial code for handling CSIP > > > > > > > > https://git.kernel.org/pub/scm/bluetooth/bluez.git/?id=d297a03b7a61 > > > > > > > > - [RFC,v2,09/12] profiles: Add initial code for csip plugin > > > > > > > > https://git.kernel.org/pub/scm/bluetooth/bluez.git/?id=9e1eb0a62b3f > > > > > > > > - [RFC,v2,10/12] tools: Add support to generate RSI using SIRK > > > > > > > > https://git.kernel.org/pub/scm/bluetooth/bluez.git/?id=c446a64d461b > > > > > > > > - [RFC,v2,11/12] client: Add support for DeviceSet proxy > > > > > > > > https://git.kernel.org/pub/scm/bluetooth/bluez.git/?id=373bafc34ce6 > > > > > > > > - [RFC,v2,12/12] client: Use AdvertisingFlags when available > > > > > > > > https://git.kernel.org/pub/scm/bluetooth/bluez.git/?id=815f779aa8e4 > > > > > > > > > > > > > > > > You are awesome, thank you! > > > > > > > > -- > > > > > > > > Deet-doot-dot, I am a bot. > > > > > > > > https://korg.docs.kernel.org/patchwork/pwbot.html > > > > > > > > > > > > > > Let me know if you guys are happy with this interface to detect > > > > > > > Coordinated Sets, it still experimental so we can experiment with it > > > > > > > until we think it is stable, regarding the implementation of the > > > > > > > transports one major difference here is that we will need to encode > > > > > > > left and right separately, not sure how hard it is to do that in > > > > > > > pipewire? > > > > > > > > > > > > As far as the device set DBus interface is concerned, it seems to work > > > > > > fine for me currently (in wip implementation for PW [0]). Don't right > > > > > > now see something that would need to be added/changed in it. > > > > > > > > > > > > Channel splitting/merging is generally easy in PW. How the playback > > > > > > synchronization is going to work on socket level may determine a bit at > > > > > > what level in PW it is convenient to do though. > > > > > > > > > > > > > > > > > > --- > > > > > > > > > > > > Laundry list for PW related to this: > > > > > > > > > > > > * How to do TX syncronization properly with the ISO sockets needs still > > > > > > some thinking. I have some wip patches [2] that add the timestamps and > > > > > > other socket API that provide timing information to allow > > > > > > synchronization to the Number of Completed packets events. > > > > > > Corresponding Pipewire implementation [3] rate matches to keep the time > > > > > > difference between those events and our audio reference time fixed at > > > > > > e.g. 25ms (2 packets in controller). Not really clear yet if this is a > > > > > > right thing to do to help the controller send packets at the right > > > > > > time. > > > > > > > > > > I have to check with our controller folks, I do recall someone saying > > > > > that perhaps we should use framed instead of unframed so the > > > > > controller can better keep up with timings, but it is not yet clear > > > > > why. > > > > > > > > > > > Here I see LE Read ISO TX Sync with Intel AX210 returning only zero > > > > > > values in Command Complete in btmon for running CIS, so that command > > > > > > doesn't seem to help here. > > > > > > > > > > Yeah, I don't think it is implemented yet. > > > > > > > > > > > * BlueZ doesn't seem to pass on the PAC audio location it reads via > > > > > > read_sink/source_pac_loc, probably very easy to fix. > > > > > > > > > > Will take a look, afaik we fixed something like this not long ago but > > > > > perhaps you are talking about something different. > > > > > > > > > > > * The CIS in a CIG cannot be started one by one, or connected to same > > > > > > destination. The kernel appears to wait until all CIS sockets in same > > > > > > CIG go to connect state before proceeding to create CIS. The spec does > > > > > > not seem to require this (I have some pre-rfc patches to make it more > > > > > > flexible [1].) > > > > > > > > > > It used to be like that but I actually have to fix it because the > > > > > controller don't accept multiple CreateCIS in parallel: > > > > > > > > > > https://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next.git/tree/net/bluetooth/hci_conn.c#n1907 > > > > > > > > > > And it would actually create a relatively big window if we queue and > > > > > wait for CIS established, because then the controller may set up its > > > > > scheduling without taking into account the second CIS which will then > > > > > fail when it comes to its setup, so I think it is better to program > > > > > them together to avoid having only one side working. > > > > > > > > Hmm, I made it queue and wait for the previous Create CIS to fully complete before emitting the next one, and that did seem to also work (also with TWS playback to the Samsung device). > > > > However did not extensively test, so even if allowed by spec risks running to controller issues? > > > > > > > > The problem here is that the second CIS is not necessarily going to come, as it may be unrelated device put to same CIG since controller doesn't support multiple CIG. > > > > > > > > In principle sound server can acquire always all CIS, but then we should expose also the cig/cis properties on transports so they know which ones are needed. > > > > > > > > It could also make sense for BlueZ do it, when any cis in cig is started. > > > > > > > > > Btw, take a look at how it was done with bluetoothctl> > > > > > transport.acquire <transport_left> <transport_right>, we have been > > > > > able to use it to acquire both left/right earbuds and then send > > > > > pre-encoded files. > > > > > > > > > > > * PW currently does transport acquires synchronously and fails because > > > > > > of that with multiple CIS, but it probably should do them async. > > > > > > > > > > > > > > > > > > [0] https://gitlab.freedesktop.org/pipewire/pipewire/-/merge_requests/1564 > > > > > > Did you make any progress on these changes above? Looks like the pull > > > request is still open, I wonder if you hit some blocker? > > > > The device set part is fine now. > > > > However, I've been first looking at sorting out TWS playback > > synchronization, and ran to some issues there. > > > > > > Current laundry list: > > > > (1) The playback to the left/right earbuds can rarely desynchronize > > spontaneously during playback, even though we send packets to both ISO > > socket fds at the same time on ISO interval schedule. > > > > Possibly, it goes to a state where the two CIS are off by one packet > > due to some queue on controller side. Desynchronization by 10ms can be > > heard easily in TWS earbuds as it transforms click at stereo center to > > separate clicks on left and right as brain interprets it. > > > > It usually resynchronizes if we halt sending packets to both CIS for ~ > > 50+ ms and then continue, and sometimes it resynchronizes > > spontaneously. > > > > I've been looking at the conn->sent values at packet completion event > > time, but it is not clear it's possible to distinguish the > > desynchronized state from synchronized one, as it appears in both you > > can have either 0 or 1 and occasionally 2 packets not yet acked by the > > controller. > > Interesting, what is the presentation delay configured, in theory that > should be used to synchronize the streams, we may need a way to > measure this latency and attempt to compensate for it somehow if > transfer speed variates. > > > > > (2) With the Samsung device, Intel AX210 fails LE Create CIS for the > > CIG with both earbuds with current kernel (btmon logs below). It works > > if only one device is connected. As a workaround, I'm currently using a > > patch [1] that changes it to do LE Create CIS for the CIG one by one. > > Since that works, could be some controller issue. > > I believe we fixed that, are you running with the latest firmware and > bluetooth-next? On the kernel side you may need the following: > > https://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next.git/commit/?id=70eff70d453bdb529d8233f59e32c1ffedac7685 > > > > > (3) The playback from Intel AX210 -> Samsung device apparently has some > > issue with the radio link/etc, as playback sometimes has crackling and > > distortion. I thought earlier this was some TX sync issue on sender > > side, but keeping 1+ packets queued in controller all the time did not > > solve it. Since also RX appears to miss packets, it's maybe not related > > to that after all. > > This might be hard to figure out without air traces, will need to > reproduce it internally. > > > > > (4) The Samsung device has some issue in that disabling source ASEs > > does not complete. Workaround is to never release transports, but would > > need to take a look again at this to be sure if it's only device issue. > > Make sure you have btmon to collect the traces when this happens. > > > > > (5) Sometimes when connecting one earbud, the other earbud fails to > > connect. Haven't yet looked into this. > > Ive seen that, this may actually be something like: > > https://github.com/bluez/bluez/issues/340#issuecomment-1494877679 > > This is less pronounced when we use the auto-connect list, since that > attempts to connect whenever it sees the device advertising so it will > continue to attempt multiple times, with the latest bluez tree this is > now the default behavior: > > https://git.kernel.org/pub/scm/bluetooth/bluez.git/commit/?id=ca07d198f9c7d289e95091c30ed15bff2106a7db > > > > > Because of (2) and (3), I'm not sure now if (1) is general issue or > > only for this device combination. However, how things are done right > > now, there doesn't seem to be a way for the user to detect CIS > > desynchronization or recover from it. > > > > Some things I tried: setting matching sequence numbers to the HCI ISO > > packets for the two CIS, but doesn't seem to do anything (maybe > > controller ignores them?). Setting packet timestamps does something, > > but appears to require synchronizing to the controller clock to produce > > any audio, which cannot be done since the controller does not have > > working LE Read ISO TX Sync. > > > > I also thought that maybe kernel hci_sched_iso could cause it, but at > > least changing it to send packets to controller in sequence number > > (provided by PW) order didn't seem to change anything. > > > > So right now at least this TWS device usually works OK, but not yet > > robustly enough to be non-experimental feature. > > Yeah, I think there will be some time needed to mature the stacks and > firmware to match what we currently have in Classic, but it is great > to have this sort of feedback from the audio subsystem. > > > > > The Intel AX210 problem: > > > > [ 1627.217064] usb 1-5: new full-speed USB device number 16 using xhci_hcd > > [ 1627.370401] usb 1-5: New USB device found, idVendor=8087, idProduct=0032, bcdDevice= 0.00 > > [ 1627.370408] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 > > [ 1627.374671] Bluetooth: hci0: Device revision is 0 > > [ 1627.374676] Bluetooth: hci0: Secure boot is enabled > > [ 1627.374678] Bluetooth: hci0: OTP lock is enabled > > [ 1627.374680] Bluetooth: hci0: API lock is enabled > > [ 1627.374681] Bluetooth: hci0: Debug lock is disabled > > [ 1627.374683] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 > > [ 1627.374685] Bluetooth: hci0: Bootloader timestamp 2019.40 buildtype 1 build 38 > > [ 1627.410381] Bluetooth: hci0: Found device firmware: intel/ibt-0041-0041.sfi > > [ 1627.410446] Bluetooth: hci0: Boot Address: 0x100800 > > [ 1627.410447] Bluetooth: hci0: Firmware Version: 107-51.22 > > [ 1629.568723] Bluetooth: hci0: Waiting for firmware download to complete > > [ 1629.569770] Bluetooth: hci0: Firmware loaded in 2108786 usecs > > [ 1629.570011] Bluetooth: hci0: Waiting for device to boot > > [ 1629.595622] Bluetooth: hci0: Device booted in 25187 usecs > > [ 1629.595647] Bluetooth: hci0: Malformed MSFT vendor event: 0x02 > > [ 1629.595923] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-0041-0041.ddc > > [ 1629.597711] Bluetooth: hci0: Applying Intel DDC parameters completed > > [ 1629.600707] Bluetooth: hci0: Firmware timestamp 2022.51 buildtype 1 build 56683 > > [ 1629.677307] Bluetooth: MGMT ver 1.22 > > > > < HCI Command: LE Set Connect.. (0x08|0x0062) plen 33 #16903 [hci0] 802.544515 > > CIG ID: 0x00 > > Central to Peripheral SDU Interval: 10000 us (0x002710) > > Peripheral to Central SDU Interval: 10000 us (0x002710) > > SCA: 201 - 500 ppm (0x00) > > Packing: Sequential (0x00) > > Framing: Unframed (0x00) > > Central to Peripheral Maximum Latency: 20 ms (0x0014) > > Peripheral to Central Maximum Latency: 20 ms (0x0014) > > Number of CIS: 2 > > CIS ID: 0x00 > > Central to Peripheral Maximum SDU Size: 120 > > Peripheral to Central Maximum SDU Size: 120 > > Central to Peripheral PHY: LE 2M (0x02) > > Peripheral to Central PHY: LE 2M (0x02) > > Central to Peripheral Retransmission attempts: 0x05 > > Peripheral to Central Retransmission attempts: 0x05 > > CIS ID: 0x01 > > Central to Peripheral Maximum SDU Size: 120 > > Peripheral to Central Maximum SDU Size: 120 > > Central to Peripheral PHY: LE 2M (0x02) > > Peripheral to Central PHY: LE 2M (0x02) > > Central to Peripheral Retransmission attempts: 0x05 > > Peripheral to Central Retransmission attempts: 0x05 > > > HCI Event: Command Complete (0x0e) plen 10 #16904 [hci0] 802.547134 > > LE Set Connected Isochronous Group Parameters (0x08|0x0062) ncmd 1 > > Status: Success (0x00) > > CIG ID: 0x00 > > Number of Handles: 2 > > Connection Handle #0: 2560 > > Connection Handle #1: 2561 > > ... > > < HCI Command: LE Create Conne.. (0x08|0x0064) plen 9 #16928 [hci0] 833.626566 > > Number of CIS: 2 > > CIS Handle: 2560 > > ACL Handle: 3585 > > CIS Handle: 2561 > > ACL Handle: 3586 > > > HCI Event: Command Status (0x0f) plen 4 #16929 [hci0] 833.628188 > > LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 > > Status: Success (0x00) > > > HCI Event: LE Meta Event (0x3e) plen 29 #16930 [hci0] 833.670453 > > LE Connected Isochronous Stream Established (0x19) > > Status: Unspecified Error (0x1f) > > Connection Handle: 2561 > > CIG Synchronization Delay: 89856 us (0x015f00) > > CIS Synchronization Delay: 4718843 us (0x4800fb) > > Central to Peripheral Latency: 1 us (0x000001) > > Peripheral to Central Latency: 0 us (0x000000) > > Central to Peripheral PHY: Reserved (0x00) > > Peripheral to Central PHY: Reserved (0x00) > > Number of Subevents: 0 > > Central to Peripheral Burst Number: 0 > > Peripheral to Central Burst Number: 0 > > Central to Peripheral Flush Timeout: 0 > > Peripheral to Central Flush Timeout: 0 > > Central to Peripheral MTU: 1536 > > Peripheral to Central MTU: 0 > > ISO Interval: 10752 > > = bluetoothd: profiles/audio/bap.c:iso_connect_cb() connect to 2.. 833.670831 > > > > -- > > Pauli Virtanen > > > > > > > > > > [1] https://github.com/pv/linux/commits/iso-fix-multicis > > > > [2] https://github.com/pv/linux/commits/iso-timestamp > > > > [3] https://gitlab.freedesktop.org/pvir/pipewire/-/commits/iso-timestamp-test > > > > https://gitlab.freedesktop.org/pvir/pipewire/-/commit/667ab3c693e0425568ac405a6a311754ed798653 > > In the isotest/bluetoothctl we actually use the latency/interval to > determine how many packets we have to send at each ISO interval: > > https://git.kernel.org/pub/scm/bluetooth/bluez.git/tree/tools/isotest.c#n704 Btw, not sure you if are following the list but I'm working on adding support for handling multiple CIS to the same peer: https://patchwork.kernel.org/project/bluetooth/list/?series=739574 That should allow you to set a different CIS ID if you want to use different sockets for input and output. Id also would like to discuss how we do some test automation using pipewire endpoints in the future, we probably want to enable it via test-runner but we probably need to enable it loading pipewire daemons etc under the vm that test-runner creates, Frederic started adding some support but it doesn't look like it loads pipewire so Im not really sure how it supposed to be loaded: https://git.kernel.org/pub/scm/bluetooth/bluez.git/tree/tools/test-runner.c#n1108 https://git.kernel.org/pub/scm/bluetooth/bluez.git/tree/tools/test-runner.c#n277 > -- > Luiz Augusto von Dentz -- Luiz Augusto von Dentz
