RE: [EXT] Re: [PATCH v6 3/3] Bluetooth: NXP: Add protocol support for NXP Bluetooth chipsets

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Ilpo

> 
> On Fri, 10 Mar 2023, Neeraj sanjay kale wrote:
> 
> > Hi Ilpo,
> >
> > I have resolved most of your comments in v8 patch, and I have few things
> to discuss regarding the v6 patch.
> >
> > > > > > +static bool nxp_fw_change_baudrate(struct hci_dev *hdev, u16
> > > > > > +req_len) {
> > > > > > +     struct btnxpuart_dev *nxpdev = hci_get_drvdata(hdev);
> > > > > > +     struct nxp_bootloader_cmd nxp_cmd5;
> > > > > > +     struct uart_config uart_config;
> > > > > > +
> > > > > > +     if (req_len == sizeof(nxp_cmd5)) {
> > > > > > +             nxp_cmd5.header = __cpu_to_le32(5);
> > > > > > +             nxp_cmd5.arg = 0;
> > > > > > +             nxp_cmd5.payload_len =
> __cpu_to_le32(sizeof(uart_config));
> > > > > > +             nxp_cmd5.crc = swab32(crc32_be(0UL, (char *)&nxp_cmd5,
> > > > > > +                                            sizeof(nxp_cmd5)
> > > > > > + - 4));
> > > > >
> > > > > swab32(crc32_be(...)) seems and odd construct instead of
> > > __cpu_to_le32().
> > > > Earlier I had tried using __cpu_to_le32() but that did not work.
> > > > The FW expects a swapped CRC value for it's header and payload data.
> > >
> > > So the .crc member should be __be32 then?
> > >
> > I disagree with using __be32.
> > I have simplified this part of the code in v8 patch, please do check it out.
> > So the CRC part of the data structure will remain __le32, and will be sent
> over UART to the chip in Little Endian format.
> > It's just that the FW expects the CRC to be byte-swapped.
> > Technically it is big endian format, but you may think of it as a "+1 level" of
> encryption (although it isn't).
> > So defining this structure member as __be32 can create more questions
> > than answers, leading to more confusion.
> > If it helps, I have also added a small comment in there to signify
> > that the FW  expects CRC in byte swapped method.
> 
> I'd have still put the member as __be32 and commented the swap
> expectation there. But it's not an end of the world even in the current form.
This sounds okay to me. I have changed the CRC datatype to __be32 and kept the comment.

Thanks,
Neeraj




[Index of Archives]     [Bluez Devel]     [Linux Wireless Networking]     [Linux Wireless Personal Area Networking]     [Linux ATH6KL]     [Linux USB Devel]     [Linux Media Drivers]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Big List of Linux Books]

  Powered by Linux