Branch: refs/heads/master Home: https://github.com/bluez/bluez Commit: d159973ecec8e65add01cb5ed8213e0ba8703965 https://github.com/bluez/bluez/commit/d159973ecec8e65add01cb5ed8213e0ba8703965 Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2023-01-23 (Mon, 23 Jan 2023) Changed paths: M src/shared/bap.c Log Message: ----------- shared/bap: Fix not detaching streams when PAC is removed When local PAC is removed we attempt to release the streams but we left it still attached to the endpoint, so this makes sure the stream is properly detached by setting its state to idle. Fixes: https://github.com/bluez/bluez/issues/457 Commit: 414c8650acfe871ea6ae860d7dca1b5fa9044b77 https://github.com/bluez/bluez/commit/414c8650acfe871ea6ae860d7dca1b5fa9044b77 Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2023-01-23 (Mon, 23 Jan 2023) Changed paths: M profiles/audio/bap.c Log Message: ----------- bap: Fix not setting stream to NULL If the stream state is idle the ep->stream shall be set to NULL otherwise it may be reused causing the following trace: ==32623==ERROR: AddressSanitizer: heap-use-after-free on address ... READ of size 8 at 0x60b000103550 thread T0 #0 0x7bf7b7 in bap_stream_valid src/shared/bap.c:4065 #1 0x7bf981 in bt_bap_stream_config src/shared/bap.c:4082 #2 0x51a7c8 in bap_config profiles/audio/bap.c:584 #3 0x71b907 in queue_foreach src/shared/queue.c:207 #4 0x51b61f in select_cb profiles/audio/bap.c:626 #5 0x4691ed in pac_select_cb profiles/audio/media.c:884 #6 0x4657ea in endpoint_reply profiles/audio/media.c:369 Fixes: https://github.com/bluez/bluez/issues/457#issuecomment-1399232486 Commit: 8aed9db4b13fa67babed7f2540d9b4d694f711ce https://github.com/bluez/bluez/commit/8aed9db4b13fa67babed7f2540d9b4d694f711ce Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2023-01-24 (Tue, 24 Jan 2023) Changed paths: M profiles/audio/bap.c Log Message: ----------- bap: Fix not removing endpoint if local PAC is unregistered If local PAC is unregistered it would also notify via pac_removed callback which shall unregister the endpoint D-Bus object. Fixes: https://github.com/bluez/bluez/issues/457#issuecomment-1402178691 Commit: 814e3535a1bc165e05d91c470b38e835c5006ac9 https://github.com/bluez/bluez/commit/814e3535a1bc165e05d91c470b38e835c5006ac9 Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2023-01-25 (Wed, 25 Jan 2023) Changed paths: M src/shared/bap.c Log Message: ----------- bap: Fix not checking if request fits when grouping When grouping requests with the same opcode the code was queueing them without attempt to check that that would fit in the ATT MTU causing the following trace: stack-buffer-overflow on address 0x7fffdba951f0 at pc 0x7fc15fc49d21 bp 0x7fffdba95020 sp 0x7fffdba947d0 WRITE of size 9 at 0x7fffdba951f0 thread T0 #0 0x7fc15fc49d20 in __interceptor_memcpy (/lib64/libasan.so.8+0x49d20) #1 0x71f698 in util_iov_push_mem src/shared/util.c:266 #2 0x7b9312 in append_group src/shared/bap.c:3424 #3 0x71ba01 in queue_foreach src/shared/queue.c:207 #4 0x7b9b66 in bap_send src/shared/bap.c:3459 #5 0x7ba594 in bap_process_queue src/shared/bap.c:351 Fixes: https://github.com/bluez/bluez/issues/457#issuecomment-1403924708 Commit: b61044d52917eb44468b46bfcafb191d18418698 https://github.com/bluez/bluez/commit/b61044d52917eb44468b46bfcafb191d18418698 Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2023-01-26 (Thu, 26 Jan 2023) Changed paths: M profiles/audio/bap.c Log Message: ----------- bap: Fix registering multiple endpoint for the same PAC set This makes sure there is only one endpoint representing a local and remote PAC set. Commit: efba4618dd2d46d842695842b152d2dd33dbcc95 https://github.com/bluez/bluez/commit/efba4618dd2d46d842695842b152d2dd33dbcc95 Author: Marcin Kraglak <marcin.kraglak@xxxxxxxxxxxxxxx> Date: 2023-01-30 (Mon, 30 Jan 2023) Changed paths: M src/shared/util.c Log Message: ----------- shared/util: Add CAS, HAS, TMAS and PBAS UUIDs Add UUIDs for: Common Audio service, Hearing Aid service, TMAS service and Public Broadcast Announcement service. Commit: eee6a75adc93b6146f662c28b8295c9b92e9494a https://github.com/bluez/bluez/commit/eee6a75adc93b6146f662c28b8295c9b92e9494a Author: Marcin Kraglak <marcin.kraglak@xxxxxxxxxxxxxxx> Date: 2023-01-30 (Mon, 30 Jan 2023) Changed paths: M AUTHORS Log Message: ----------- AUTHORS: Update Marcin's email Commit: f367fa3c9fe591792f124db2c9d81b61f296afdf https://github.com/bluez/bluez/commit/f367fa3c9fe591792f124db2c9d81b61f296afdf Author: Marcin Kraglak <marcin.kraglak@xxxxxxxxxxxxxxx> Date: 2023-01-30 (Mon, 30 Jan 2023) Changed paths: M monitor/att.c Log Message: ----------- monitor/att: Fix Set Member Lock decoding According to CSIS specification v1.0.1: "Allowed values for the Set Member Lock characteristic are Unlocked (corresponding to the numeric value 0x01) and Locked (corresponding to the numeric value 0x02); all other values are RFU". Commit: 5845f003ac271d361b699a3d0140ee98fdf11db9 https://github.com/bluez/bluez/commit/5845f003ac271d361b699a3d0140ee98fdf11db9 Author: Brian Gix <brian.gix@xxxxxxxxx> Date: 2023-01-30 (Mon, 30 Jan 2023) Changed paths: M AUTHORS Log Message: ----------- AUTHORS: modify Brian Gix email address Commit: 265c12dc96081b969a60e2b5baad6087940cd7be https://github.com/bluez/bluez/commit/265c12dc96081b969a60e2b5baad6087940cd7be Author: Brian Gix <brian.gix@xxxxxxxxx> Date: 2023-01-30 (Mon, 30 Jan 2023) Changed paths: M doc/mesh-api.txt Log Message: ----------- doc/mesh: Add Remote Provisioning DBus APIs Remote Provisioning (introduced in Mesh Profile Specification v1.1) * Allows Provisioners to use a remote server to scan for and provision devices. * Allows Config managers to reprovision existing nodes to: * Refresh Device Keys * Reassign Node Addresses * Refresh Node Composition Commit: f3243ecba0a2a062021e461afc4fdc91e480f510 https://github.com/bluez/bluez/commit/f3243ecba0a2a062021e461afc4fdc91e480f510 Author: Brian Gix <brian.gix@xxxxxxxxx> Date: 2023-01-30 (Mon, 30 Jan 2023) Changed paths: M Makefile.mesh M mesh/cfgmod-server.c M mesh/keyring.c M mesh/keyring.h M mesh/manager.c M mesh/mesh-config-json.c M mesh/mesh-config.h M mesh/model.c M mesh/node.c M mesh/node.h M mesh/pb-adv.c M mesh/pb-adv.h M mesh/prov-acceptor.c M mesh/prov-initiator.c M mesh/prov.h M mesh/provision.h A mesh/remprv-server.c A mesh/remprv.h Log Message: ----------- mesh: Add Remote Provisioning Add Remote Provisioning Server Add Remote Provisioning Client Remove local scanning/provisioning Add delete-all dev key function Add NPPI procedures Commit: c50ecca56654f3c1c4b3cc9f9402a64cca9164f8 https://github.com/bluez/bluez/commit/c50ecca56654f3c1c4b3cc9f9402a64cca9164f8 Author: Brian Gix <brian.gix@xxxxxxxxx> Date: 2023-01-30 (Mon, 30 Jan 2023) Changed paths: M tools/mesh-cfgclient.c M tools/mesh/cfgcli.c M tools/mesh/mesh-db.c M tools/mesh/mesh-db.h M tools/mesh/remote.c M tools/mesh/remote.h Log Message: ----------- tools/mesh: Optimize for multiple RPR servers and NPPI These changes allow the mesh-cfgclient tool to request remote node compositions from page 128. Depending on the differences between there and what is stored in the local configuration database, it may recomend reprovisioning with NPPI-1 (Address Refresh) or NPPI-2 (Composition Refresh). Additionally, NPPI-0 may be performed to refresh the Device Key only. Commit: 9923c09de57e558a8b85df12bed31b9be4d2ec9f https://github.com/bluez/bluez/commit/9923c09de57e558a8b85df12bed31b9be4d2ec9f Author: Brian Gix <brian.gix@xxxxxxxxx> Date: 2023-01-30 (Mon, 30 Jan 2023) Changed paths: M mesh/crypto.c M mesh/crypto.h Log Message: ----------- mesh: Rename parameter list per crypto usage The derived key generated by the "nkpk" salt and network master key is used to create Private Beacons as of Mesh Profile Specification v1.1 Commit: 2ff937b6aa5030f4330851e8c1140af88c03c752 https://github.com/bluez/bluez/commit/2ff937b6aa5030f4330851e8c1140af88c03c752 Author: Brian Gix <brian.gix@xxxxxxxxx> Date: 2023-01-30 (Mon, 30 Jan 2023) Changed paths: M unit/test-mesh-crypto.c Log Message: ----------- unit/mesh: Add unit testing of Mesh Private Beaconing This includes the Sample Data from the Mesh Profile specification v1.1, and validates that the beacon crypto functions work as expected. Commit: cbeca2fba171efc51cd1d84026c282d1247c40f8 https://github.com/bluez/bluez/commit/cbeca2fba171efc51cd1d84026c282d1247c40f8 Author: Brian Gix <brian.gix@xxxxxxxxx> Date: 2023-01-30 (Mon, 30 Jan 2023) Changed paths: M mesh/mesh-config-json.c M mesh/mesh-config.h Log Message: ----------- mesh: Add storage of Mesh Private Beacon settings If current storage does not exist in node.json, the Mesh Private Beacon will be disabled. Commit: 6619b24cc23710c3074fe90c6510cb3688bee701 https://github.com/bluez/bluez/commit/6619b24cc23710c3074fe90c6510cb3688bee701 Author: Brian Gix <brian.gix@xxxxxxxxx> Date: 2023-01-30 (Mon, 30 Jan 2023) Changed paths: M Makefile.mesh A mesh/prv-beacon.h A mesh/prvbeac-server.c Log Message: ----------- mesh: Add Mesh Private Beacon server This initial server supports only the Mesh Private Beacon and returns "Not Suppoerted" for Get/Set of Private GATT Proxy and Private Node Identity beacons. Commit: 5ba57cf85140e2087fef0e617608ee33a04c5449 https://github.com/bluez/bluez/commit/5ba57cf85140e2087fef0e617608ee33a04c5449 Author: Brian Gix <brian.gix@xxxxxxxxx> Date: 2023-01-30 (Mon, 30 Jan 2023) Changed paths: M mesh/net-keys.c M mesh/net-keys.h M mesh/net.c M mesh/net.h M mesh/node.c Log Message: ----------- mesh: Add Tx/Rx support of Mesh Private Beacons With this change, we start evaluating received Mesh Private Beacons in addition to the legacy Secure Network Beacons. We also add the ability to request Tx of Mesh Private Beacons, which are regenerated with new Random Nonce a minimum of every 0 - 2550 seconds. Commit: ebb219614108b3e227b9fde2ff3fdb8ec99512f7 https://github.com/bluez/bluez/commit/ebb219614108b3e227b9fde2ff3fdb8ec99512f7 Author: Brian Gix <brian.gix@xxxxxxxxx> Date: 2023-01-30 (Mon, 30 Jan 2023) Changed paths: M mesh/model.c M mesh/net-keys.c M mesh/net-keys.h M mesh/node.c M mesh/node.h M mesh/prvbeac-server.c Log Message: ----------- mesh: Add internal Mesh Private Beacon model Adds recgnition that the Mesh Private Beacon model is internal and foundational, without bindings. Commit: cc8a4d858bccccc03899faf9bd5e25439813e15e https://github.com/bluez/bluez/commit/cc8a4d858bccccc03899faf9bd5e25439813e15e Author: Brian Gix <brian.gix@xxxxxxxxx> Date: 2023-01-30 (Mon, 30 Jan 2023) Changed paths: M tools/mesh-cfgclient.c M tools/mesh/cfgcli.c M tools/mesh/util.c Log Message: ----------- tools/mesh: Add support for Mesh Private Beacons This allows generation of Mesh Private Beacon server commands, and recognition of the resulting Status messages. Commit: e71d0e802629bb939c7d518a2e33571fb996b72b https://github.com/bluez/bluez/commit/e71d0e802629bb939c7d518a2e33571fb996b72b Author: Brian Gix <brian.gix@xxxxxxxxx> Date: 2023-01-30 (Mon, 30 Jan 2023) Changed paths: M mesh/net.c Log Message: ----------- mesh: Switch beaconing net key When transitioning from Phase 1 to Phase 2 of a network key and we are beaconing, we need to halt the beaconing on the old key version, and begin beaconing on the new key version. Commit: 4bdd7090f0dfd0692dcc410340ff831d4f89d27f https://github.com/bluez/bluez/commit/4bdd7090f0dfd0692dcc410340ff831d4f89d27f Author: Brian Gix <brian.gix@xxxxxxxxx> Date: 2023-01-30 (Mon, 30 Jan 2023) Changed paths: M mesh/crypto.c Log Message: ----------- mesh: Fix Checksmatch warning Commit: 5045e9845b9fbe105ce833267184e7876721fd3b https://github.com/bluez/bluez/commit/5045e9845b9fbe105ce833267184e7876721fd3b Author: Brian Gix <brian.gix@xxxxxxxxx> Date: 2023-01-30 (Mon, 30 Jan 2023) Changed paths: M mesh/crypto.c Log Message: ----------- mesh: Remove unused byte swap for ScanBuild Commit: 8787aed7fe0089c079884784131e630ddacc6d26 https://github.com/bluez/bluez/commit/8787aed7fe0089c079884784131e630ddacc6d26 Author: Inga Stotland <inga.stotland@xxxxxxxxx> Date: 2023-01-30 (Mon, 30 Jan 2023) Changed paths: M tools/mesh-cfgtest.c Log Message: ----------- tools/mesh-cfgtest: Support extended device composition This adds support for extended device composition to account for new fundamental models supported by bluetooth-meshd daemon. Also, update to include explicit element locations and handle different ordering of model IDs in the composition data. Commit: ca6546fe521360fcf905bc115b893f322e706cb2 https://github.com/bluez/bluez/commit/ca6546fe521360fcf905bc115b893f322e706cb2 Author: Sam James <sam@xxxxxxxxxx> Date: 2023-01-31 (Tue, 31 Jan 2023) Changed paths: M src/shared/util.c Log Message: ----------- shared: define MAX_INPUT for musl musl systems don't have MAX_INPUT. Just define it to _POSIX_MAX_INPUT which musl does have if it's not already defined. Note that on glibc, the values match anyway (as of glibc-2.36), and indeed POSIX_MAX_INPUT has the same value on musl too. Bug: https://bugs.gentoo.org/888467 Commit: 17bcd2a37629cc12b683cc92dc51d124e0ab3fe1 https://github.com/bluez/bluez/commit/17bcd2a37629cc12b683cc92dc51d124e0ab3fe1 Author: Maheta, Abhay <abhay.maheshbhai.maheta@xxxxxxxxx> Date: 2023-01-31 (Tue, 31 Jan 2023) Changed paths: M profiles/audio/bap.c M profiles/audio/media.c M profiles/audio/transport.c Log Message: ----------- profiles: Add Support for Metadata, CID and VID This adds support for Metadata, Company ID and Vendor Codec ID Commit: 33d99e12c37f6075d2b3819c30c1cf17fa52c57f https://github.com/bluez/bluez/commit/33d99e12c37f6075d2b3819c30c1cf17fa52c57f Author: Abhay Maheta <abhay.maheshbhai.maheta@xxxxxxxxx> Date: 2023-01-31 (Tue, 31 Jan 2023) Changed paths: M client/player.c Log Message: ----------- client/player: Add support for Company ID, Vendor ID This adds support for Company ID and Vendor Codec ID in BAP profile. This also adds handling of Vendor Specific Coding format for BAP Profile. Now it allows to enter zero codec capabilities for vendor codec. In order to register zero codec capabilities, 0 shall be entered when prompted. Commit: be5c49385e4d8403d773b2838369a5987e732ff0 https://github.com/bluez/bluez/commit/be5c49385e4d8403d773b2838369a5987e732ff0 Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2023-01-31 (Tue, 31 Jan 2023) Changed paths: M src/shared/util.c Log Message: ----------- shared/util: Check arguments on util_memcpy This avoids having to check for !src or !len before calling util_memcpy since otherwise it can cause runtime errors. Commit: d611a40ffc7bdc6b2e727550369a5aee7ffdb4cf https://github.com/bluez/bluez/commit/d611a40ffc7bdc6b2e727550369a5aee7ffdb4cf Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2023-01-31 (Tue, 31 Jan 2023) Changed paths: M doc/media-api.txt Log Message: ----------- media-api: Make Vendor a uint32_t Using two uint16_t requires the use of a container which makes things a lot more complicated so this switch to use a single uint32_t. Commit: dcbdf5e67f3e4cba29f2fb9f0e5fcdad06540738 https://github.com/bluez/bluez/commit/dcbdf5e67f3e4cba29f2fb9f0e5fcdad06540738 Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2023-01-31 (Tue, 31 Jan 2023) Changed paths: M client/player.c M profiles/audio/media.c Log Message: ----------- media: Rework support of Vendor to use uint32_t as type This reworks the handlings of Vendor property to use a single uint32_t. Commit: 67395a3b357d492089e0606e7a5168e48651703d https://github.com/bluez/bluez/commit/67395a3b357d492089e0606e7a5168e48651703d Author: Pauli Virtanen <pav@xxxxxx> Date: 2023-02-01 (Wed, 01 Feb 2023) Changed paths: M profiles/audio/media.c Log Message: ----------- media: set default value for BAP endpoint Vendor field The "Vendor" field is optional, and should have an initialized valid default value. It has the default values in register_endpoint, but not in app_register_endpoint, so make the latter match the former. Commit: f56205e3056428e2f9d49c8805d52240214c4915 https://github.com/bluez/bluez/commit/f56205e3056428e2f9d49c8805d52240214c4915 Author: Pauli Virtanen <pav@xxxxxx> Date: 2023-02-13 (Mon, 13 Feb 2023) Changed paths: M src/shared/bap.c Log Message: ----------- shared/bap: fix local endpoint state to be per-client ASCS v1.0 Sec. 4.1: "For each ASE characteristic (distinguished by their attribute handles), the server shall expose separate ASE characteristic values for each client." In shared/bap.c, the ASE chrc value is contained in bt_bap_endpoint struct. As implemented currently, the same local ASE chrc value is shared between all clients, in contradiction with the above. Namely, the bt_bap_endpoint is looked up based on the gatt_db_attribute handles, in bap_get_endpoint and bap_get_endpoint_id, but the handles correspond to the ASCS registrations, and do not depend on which client is in question. Fix this by moving the endpoint states to the bt_bap BAP session struct, so that the ASE state is associated with the sessions, and each session has separate state. Commit: 7b1b1a499cf334efa6b190ccaa8fb9ef223f66b4 https://github.com/bluez/bluez/commit/7b1b1a499cf334efa6b190ccaa8fb9ef223f66b4 Author: Pauli Virtanen <pav@xxxxxx> Date: 2023-02-13 (Mon, 13 Feb 2023) Changed paths: M profiles/audio/media.c Log Message: ----------- media: clear the right transport when clearing BAP endpoint Each configured BAP stream is associated with a transport, and only that transport should be cleared when the stream's configuration is cleared. This is required for multiple BAP clients to use the same Media1 endpoint, which is what we should aim for to follow the spirit in which the endpoints work in ASCS. Sound servers generally can handle this, since the *Configuration calls provide the transport paths, and for different clients they are associated with different devices. Commit: 3e2e3aa739040605e0fb0f8f1e69bfd9a7e607d1 https://github.com/bluez/bluez/commit/3e2e3aa739040605e0fb0f8f1e69bfd9a7e607d1 Author: Pauli Virtanen <pav@xxxxxx> Date: 2023-02-13 (Mon, 13 Feb 2023) Changed paths: M doc/mgmt-api.txt Log Message: ----------- doc: remove unimplemented Quality Report from MGMT settings The Set Quality Report command was removed in commit 0454e2d09570 ("mgmt: Add support for Mesh in the kernel"), but the settings bit was not removed. It's also not implemented on kernel side, so remove it now. Commit: 97ad0ecbfdd4934860e46984dc83aa876d7e448c https://github.com/bluez/bluez/commit/97ad0ecbfdd4934860e46984dc83aa876d7e448c Author: Pauli Virtanen <pav@xxxxxx> Date: 2023-02-13 (Mon, 13 Feb 2023) Changed paths: M doc/mgmt-api.txt Log Message: ----------- doc: add MGMT setting for CIS features Add definitions for new MGMT Controller Information settings bits, indicating adapter Connected Isochronous Stream - Central/Peripheral feature support. Commit: c35d32b19989a26a584d87e2639fe8abd0f7e63c https://github.com/bluez/bluez/commit/c35d32b19989a26a584d87e2639fe8abd0f7e63c Author: Pauli Virtanen <pav@xxxxxx> Date: 2023-02-13 (Mon, 13 Feb 2023) Changed paths: M lib/mgmt.h Log Message: ----------- lib: Add defines for MGMT setting bits for CIS feature support Commit: 0f2f7a8fe270e30c49343849a284eb29116b5487 https://github.com/bluez/bluez/commit/0f2f7a8fe270e30c49343849a284eb29116b5487 Author: Pauli Virtanen <pav@xxxxxx> Date: 2023-02-13 (Mon, 13 Feb 2023) Changed paths: M monitor/packet.c Log Message: ----------- monitor: add MGMT setting bit names for CIS feature support Add names for CIS Central/Peripheral MGMT bits: @ MGMT Event: Command Complete (0x0001) plen 283 {0x0002} [hci0] 3.745117 Read Controller Information (0x0004) plen 280 Status: Success (0x00) Address: XX:XX:XX:XX:XX:XX (Intel Corporate) Version: Bluetooth 5.3 (0x0c) Manufacturer: Intel Corp. (2) Supported settings: 0x000ffeff Powered Connectable Fast Connectable Discoverable Bondable Link Security Secure Simple Pairing BR/EDR Low Energy Advertising Secure Connections Debug Keys Privacy Controller Configuration Static Address PHY Configuration Wideband Speech CIS Central CIS Peripheral Current settings: 0x000c0ad1 Powered Bondable Secure Simple Pairing BR/EDR Low Energy Secure Connections CIS Central CIS Peripheral Class: 0x7c0104 Major class: Computer (desktop, notebook, PDA, organizers) Minor class: Desktop workstation Rendering (Printing, Speaker) Capturing (Scanner, Microphone) Object Transfer (v-Inbox, v-Folder) Audio (Speaker, Microphone, Headset) Telephony (Cordless telephony, Modem, Headset) Name: xxx Short name: Commit: 6f131929b832e9b9fbb2df301d31b4154a1b213b https://github.com/bluez/bluez/commit/6f131929b832e9b9fbb2df301d31b4154a1b213b Author: Pauli Virtanen <pav@xxxxxx> Date: 2023-02-13 (Mon, 13 Feb 2023) Changed paths: M tools/btmgmt.c Log Message: ----------- tools/btmgmt: add MGMT setting bit names for CIS feature support Add names for CIS Central/Peripheral MGMT setting bits: [mgmt]# info Index list with 1 item hci0: Primary controller addr XX:XX:XX:XX:XX:XX version 12 manufacturer 2 class 0x7c0104 supported settings: powered connectable fast-connectable discoverable bondable link-security ssp br/edr le advertising secure-conn debug-keys privacy configuration static-addr phy-configuration wide-band-speech cis-central cis-peripheral current settings: powered bondable ssp br/edr le secure-conn cis-central cis-peripheral name xxx short name hci0: Configuration options supported options: public-address missing options: Commit: 94af45bc09a79443322e8f8bbbe0e7875856188f https://github.com/bluez/bluez/commit/94af45bc09a79443322e8f8bbbe0e7875856188f Author: Pauli Virtanen <pav@xxxxxx> Date: 2023-02-13 (Mon, 13 Feb 2023) Changed paths: M src/adapter.c M src/adapter.h Log Message: ----------- adapter: Add function for checking adapter settings Add function for checking adapter current settings. Commit: f2a29899297aa55307fe12521dca637f9080f683 https://github.com/bluez/bluez/commit/f2a29899297aa55307fe12521dca637f9080f683 Author: Pauli Virtanen <pav@xxxxxx> Date: 2023-02-13 (Mon, 13 Feb 2023) Changed paths: M profiles/audio/media.c Log Message: ----------- media: Check adapter CIS support to add BAP in SupportedUUIDs Don't indicate BAP support in SupportedUUIDs, if adapter supports neither CIS Central nor Peripheral. Commit: 5d63ee2a58c60fdd9f73298d0686e63ef9e16273 https://github.com/bluez/bluez/commit/5d63ee2a58c60fdd9f73298d0686e63ef9e16273 Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2023-02-13 (Mon, 13 Feb 2023) Changed paths: M lib/mgmt.h Log Message: ----------- mgmt: Use BIT macro when defining bitfields This makes use of BIT macro when defining bitfields which makes it clearer what bit it is toggling. Commit: 89f535894e59b66e70213ec9ab33fd158e8f54f1 https://github.com/bluez/bluez/commit/89f535894e59b66e70213ec9ab33fd158e8f54f1 Author: Dave Nicolson <david.nicolson@xxxxxxxxx> Date: 2023-02-14 (Tue, 14 Feb 2023) Changed paths: M attrib/gatttool.c Log Message: ----------- gatttool: Use consistent spacing before brackets Commit: aa50506c9f40fa4f221583e2a8e99e513ebf9630 https://github.com/bluez/bluez/commit/aa50506c9f40fa4f221583e2a8e99e513ebf9630 Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2023-02-14 (Tue, 14 Feb 2023) Changed paths: M monitor/att.c Log Message: ----------- monitor/att: Fix ASE frequency values This fixes the printed hex value of some of the frequencies. Commit: f7d0599afe9b94aef494613acf10abe6af15342b https://github.com/bluez/bluez/commit/f7d0599afe9b94aef494613acf10abe6af15342b Author: Pauli Virtanen <pav@xxxxxx> Date: 2023-02-15 (Wed, 15 Feb 2023) Changed paths: M profiles/audio/transport.c M profiles/audio/transport.h Log Message: ----------- audio/transport: add media_transport_get_stream method for transports Add a method for getting the audio stream associated with a media transport. Commit: e9163b09a3dff9d33362ebccfe9eb031e8f8cdda https://github.com/bluez/bluez/commit/e9163b09a3dff9d33362ebccfe9eb031e8f8cdda Author: Pauli Virtanen <pav@xxxxxx> Date: 2023-02-15 (Wed, 15 Feb 2023) Changed paths: M profiles/audio/media.c Log Message: ----------- media: look up BAP transports by their associated stream To look up transports, use BAP stream pointers associated with them, not the path strings stored in the stream user data. This makes it clearer that transports presented to the sound server correspond to the actual streams. The Acquire/etc. of BAP transports are already tied to the associated stream. This fixes use-after-free crashes in pac_clear. They occur because the lifetime of the path string was either that of media transport or media endpoint, which may be shorter than that of the BAP stream. In such case, pac_clear is entered with invalid pointer in stream user data, leading to crash. There are a few code paths for this, e.g. making sound server delay its SetConfiguration response (e.g. gdb breakpoint) to get dbus timeout, then disconnecting: ERROR: AddressSanitizer: heap-use-after-free on address XXXX READ of size 3 at 0x606000031640 thread T0 ... #4 0x559891 in btd_debug src/log.c:117 #5 0x46abfd in pac_clear profiles/audio/media.c:1096 #6 0x79fcaf in bap_stream_clear_cfm src/shared/bap.c:914 #7 0x7a060d in bap_stream_detach src/shared/bap.c:987 #8 0x7a25ea in bap_stream_state_changed src/shared/bap.c:1210 #9 0x7a29cd in stream_set_state src/shared/bap.c:1254 #10 0x7be824 in stream_foreach_detach src/shared/bap.c:3820 #11 0x71d15d in queue_foreach src/shared/queue.c:207 #12 0x7beb98 in bt_bap_detach src/shared/bap.c:3836 #13 0x5228cb in bap_disconnect profiles/audio/bap.c:1342 #14 0x63247c in btd_service_disconnect src/service.c:305 freed by thread T0 here: #0 0x7f16708b9388 in __interceptor_free.part.0 (/lib64/libasan.so.8+0xb9388) #1 0x7f167071b8cc in g_free (/lib64/libglib-2.0.so.0+0x5b8cc) #2 0x7047b7 in remove_interface gdbus/object.c:660 #3 0x70aef6 in g_dbus_unregister_interface gdbus/object.c:1394 #4 0x47be30 in media_transport_destroy profiles/audio/transport.c:217 #5 0x464ab9 in endpoint_remove_transport profiles/audio/media.c:270 #6 0x464d26 in clear_configuration profiles/audio/media.c:292 #7 0x464e69 in clear_endpoint profiles/audio/media.c:300 #8 0x46516e in endpoint_reply profiles/audio/media.c:325 ... Fixes: 7b1b1a499cf3 ("media: clear the right transport when clearing BAP endpoint") Commit: 5d347b54714e0f2d750253be09b68b0c3119dd0a https://github.com/bluez/bluez/commit/5d347b54714e0f2d750253be09b68b0c3119dd0a Author: Pauli Virtanen <pav@xxxxxx> Date: 2023-02-15 (Wed, 15 Feb 2023) Changed paths: M profiles/audio/media.c Log Message: ----------- media: fix ASAN crash in pac_config_cb Don't call configuration callback if stream's transport was cleared in the meantime. The clear callback is called just before the stream is freed. Fixes ASAN crash on disconnect while waiting for SetConfiguration DBus reply: ERROR: AddressSanitizer: heap-use-after-free on address 0x60b00002eb90 READ of size 8 at 0x60b00002eb90 thread T0 #0 0x7a4892 in bap_stream_config_cfm_cb src/shared/bap.c:3201 #1 0x4688fb in pac_config_cb profiles/audio/media.c:1010 #2 0x462164 in media_endpoint_cancel profiles/audio/media.c:157 #3 0x462243 in media_endpoint_cancel_all profiles/audio/media.c:165 #4 0x46365b in clear_endpoint profiles/audio/media.c:297 #5 0x463a21 in endpoint_reply profiles/audio/media.c:325 ... freed by thread T0 here: #0 0x7eff644b9388 in __interceptor_free.part.0 (/lib64/libasan.so.8+0xb9388) #1 0x78d8cc in bap_stream_free src/shared/bap.c:974 #2 0x78dbc8 in bap_stream_detach src/shared/bap.c:991 #3 0x78fa43 in bap_stream_state_changed src/shared/bap.c:1210 #4 0x78fe26 in stream_set_state src/shared/bap.c:1254 #5 0x7ab5ce in stream_foreach_detach src/shared/bap.c:3820 #6 0x70ce06 in queue_foreach src/shared/queue.c:207 #7 0x7ab942 in bt_bap_detach src/shared/bap.c:3836 #8 0x51da7a in bap_disconnect profiles/audio/bap.c:1342 #9 0x626e57 in btd_service_disconnect src/service.c:305 Commit: 1bfd597fe8817c2cb4c710270f5a82511a9f94f4 https://github.com/bluez/bluez/commit/1bfd597fe8817c2cb4c710270f5a82511a9f94f4 Author: Pauli Virtanen <pav@xxxxxx> Date: 2023-02-21 (Tue, 21 Feb 2023) Changed paths: M profiles/audio/transport.c Log Message: ----------- audio/transport: update BAP transport QOS values when changed Currently, BAP transport publishes on DBus QOS values obtained at transport creation time. For BAP server the transport creation usually occurs before stream QOS is configured, and these values are then all zero. bap->sdu is also never set. Update transport QOS values in DBus when stream state changes. Since nearly all QOS values are exposed in the transport, use bt_bap_qos to store them there for simplicity. Commit: 1106b28be85ac9586d1758839226e163e9030ee2 https://github.com/bluez/bluez/commit/1106b28be85ac9586d1758839226e163e9030ee2 Author: Tedd Ho-Jeong An <tedd.an@xxxxxxxxx> Date: 2023-02-21 (Tue, 21 Feb 2023) Changed paths: M configure.ac Log Message: ----------- configure: Check ell path If the 'enable-external-ell' is not specified in the configure parameter, the build system assumes that the ELL source is located same level where the bluez source is cloned. But the configure doens't check the folder and user will get the build error while building the source. This patch checks if the ELL source path if the 'enable-external-ell' flag is not set and throws an error if the ELL doesn't exist. Commit: 46a5d2beccb2ea73f28502950f52032cf4811d37 https://github.com/bluez/bluez/commit/46a5d2beccb2ea73f28502950f52032cf4811d37 Author: Pauli Virtanen <pav@xxxxxx> Date: 2023-02-23 (Thu, 23 Feb 2023) Changed paths: M src/device.c Log Message: ----------- device: wait GATT client ready before service accept() if no cache On device ATT attach, do not immediately call accept() for profiles, if there is no cached data in GATT database. Instead, wait for service resolution to complete, as likely accept() cannot succeed before that. Several profiles (bap, vcp, midi, deviceinfo) assume that GATT attributes are available when their accept() is called, returning success even if not. In this case, the services never find the remote attributes and are not operable. Other profiles (hog, batt, ...) fail their accept which prompts core to retry after discovery, and work correctly also in this case. Fix the failing services by waiting for service resolution as necessary, so profiles can assume the GATT DB has some content. Commit: fcdd38acf6b2cf6b81be1dd7ec3a240757f90728 https://github.com/bluez/bluez/commit/fcdd38acf6b2cf6b81be1dd7ec3a240757f90728 Author: Pauli Virtanen <pav@xxxxxx> Date: 2023-02-27 (Mon, 27 Feb 2023) Changed paths: M src/shared/bap.c Log Message: ----------- shared/bap: fix crash unregistering media endpoint while streaming Always free BAP stream in bt_bap_stream_release if it is not attached to a client session, simplifying the cleanup. Fixes the following ASAN crash is observed when media endpoint is unregistered (stopping sound server) while streaming from remote BAP client: ERROR: AddressSanitizer: heap-use-after-free on address 0x60b0000474d8 READ of size 8 at 0x60b0000474d8 thread T0 #0 0x7a27c6 in stream_set_state src/shared/bap.c:1227 #1 0x7aff61 in remove_streams src/shared/bap.c:2483 #2 0x71d2d0 in queue_foreach src/shared/queue.c:207 #3 0x7b0152 in bt_bap_remove_pac src/shared/bap.c:2501 #4 0x463cda in media_endpoint_destroy profiles/audio/media.c:179 ... 0x60b0000474d8 is located 8 bytes inside of 112-byte region freed by thread T0 here: #0 0x7f93b12b9388 in __interceptor_free.part.0 (/lib64/libasan.so.8+0xb9388) #1 0x7a0504 in bap_stream_free src/shared/bap.c:972 #2 0x7a0800 in bap_stream_detach src/shared/bap.c:989 #3 0x7a26d1 in bap_stream_state_changed src/shared/bap.c:1208 #4 0x7a2ab4 in stream_set_state src/shared/bap.c:1252 #5 0x7ab18a in stream_release src/shared/bap.c:1985 #6 0x7c6919 in bt_bap_stream_release src/shared/bap.c:4572 #7 0x7aff50 in remove_streams src/shared/bap.c:2482 ... previously allocated by thread T0 here: #0 0x7f93b12ba6af in __interceptor_malloc (/lib64/libasan.so.8+0xba6af) #1 0x71e9ae in util_malloc src/shared/util.c:43 #2 0x79c2f5 in bap_stream_new src/shared/bap.c:766 #3 0x7a4863 in ep_config src/shared/bap.c:1446 #4 0x7a4f22 in ascs_config src/shared/bap.c:1481 ... Commit: 80a45cb6a2402c820359dba593d9f5c68c30fb6e https://github.com/bluez/bluez/commit/80a45cb6a2402c820359dba593d9f5c68c30fb6e Author: Pauli Virtanen <pav@xxxxxx> Date: 2023-02-27 (Mon, 27 Feb 2023) Changed paths: M emulator/bthost.c M emulator/bthost.h M tools/iso-tester.c Log Message: ----------- bthost: Allow sending ISO packets with sequence number and timestamp Change bthost_send_iso to take packet sequence number and timestamp, and allow it to send timestamped HCI ISO data packets. Currently, btdev passes through ISO packets, so this can also be used to test RX timestamping. Commit: 2be849c2398bb57424053ffd6ca408ef907469bc https://github.com/bluez/bluez/commit/2be849c2398bb57424053ffd6ca408ef907469bc Author: Pauli Virtanen <pav@xxxxxx> Date: 2023-02-27 (Mon, 27 Feb 2023) Changed paths: M tools/iso-tester.c Log Message: ----------- iso-tester: Add test for central receiving timestamped ISO packet This attempts to receive a timestamped HCI ISO data packet on central. With kernel 6.2 HCI ISO packet parsing this test fails with Bluetooth: Frame malformed (len 40, expected len 0) Link: https://lore.kernel.org/linux-bluetooth/1fd2d4523c139deda93aab2c31f1508d79c32472.1676921889.git.pav@xxxxxx/ Commit: 1923f5dd9068308e880eab5609becc601b41d286 https://github.com/bluez/bluez/commit/1923f5dd9068308e880eab5609becc601b41d286 Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2023-03-02 (Thu, 02 Mar 2023) Changed paths: M src/device.c Log Message: ----------- device: Don't attempt to connect LE if ATT is already connected This checks if an att instance already exists before attempting to connect it once again. Commit: 24aeb319610b96f938ff7772e15bf0409813eaa4 https://github.com/bluez/bluez/commit/24aeb319610b96f938ff7772e15bf0409813eaa4 Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2023-03-02 (Thu, 02 Mar 2023) Changed paths: M client/player.c Log Message: ----------- client: Allow transport.send command to work with multiple transports This enables transport.send to work with multiple transports instead of sending one by one which can create synchronization problems. Commit: 36c234625bda881bc9d5bd99305706b86d117716 https://github.com/bluez/bluez/commit/36c234625bda881bc9d5bd99305706b86d117716 Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2023-03-02 (Thu, 02 Mar 2023) Changed paths: M src/shared/bap.c Log Message: ----------- shared/bap: Cleanup requests on detach If session is being detached any ongoing/queue request shall be cancelled as well otherwise when the session is attach again they would be invalid. Commit: d6f790f82de117fc16f5a6a8879be90599f85c8f https://github.com/bluez/bluez/commit/d6f790f82de117fc16f5a6a8879be90599f85c8f Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2023-03-02 (Thu, 02 Mar 2023) Changed paths: M src/shared/gatt-client.c M src/shared/gatt-client.h Log Message: ----------- share/gatt-client: Introduce idle callback This introduces the concept of idle callback which can be used to get notified when there is no more pending requests by the client. Commit: 15458c5e1071fa9fa23c373e3330ff45d1792e3f https://github.com/bluez/bluez/commit/15458c5e1071fa9fa23c373e3330ff45d1792e3f Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2023-03-02 (Thu, 02 Mar 2023) Changed paths: M profiles/audio/media.c Log Message: ----------- media: Fix not checking BREDR support for A2DP A2DP shall depend on MGMT_SETTING_BREDR setting so the likes of bluetoothctl -e don't attempt to register A2DP with controller that are on LE only mode. Commit: 07bd8e3a720af1ff7cee85d771dfd39065d5ac11 https://github.com/bluez/bluez/commit/07bd8e3a720af1ff7cee85d771dfd39065d5ac11 Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2023-03-02 (Thu, 02 Mar 2023) Changed paths: M src/shared/bap.c Log Message: ----------- shared/bap: Make use of bt_gatt_client_idle_register This uses bt_gatt_client_idle_register to track when instance is ready instead of using a dedicated queue to track requests. Fixes: https://github.com/bluez/bluez/issues/485 Commit: 57f15616abdef2a7a300018c9d32c723b2f9f743 https://github.com/bluez/bluez/commit/57f15616abdef2a7a300018c9d32c723b2f9f743 Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2023-03-02 (Thu, 02 Mar 2023) Changed paths: M profiles/audio/bap.c M src/shared/bap.c M src/shared/bap.h Log Message: ----------- bap: Fix crash on unexpected disconnect If an unexpected disconnect happens while bt_bap_config is pending the following trace can be observed, to fix it bt_bap_config is reworked so it no longer attempts to create and config the stream in place, instead it just return the new stream and the function is renamed to bt_bap_stream_new: Invalid write of size 4 at 0x3980D8: config_cb (bap.c:395) by 0x4DF5A3: bap_req_complete (bap.c:3471) by 0x4E9D33: bap_req_detach (bap.c:3807) by 0x4E9D33: bt_bap_detach (bap.c:3819) by 0x4E9D33: bt_bap_detach (bap.c:3810) by 0x397AA9: bap_disconnect (bap.c:1342) by 0x4223E0: btd_service_disconnect (service.c:305) by 0x4974D8F: g_slist_foreach (in /usr/lib64/libglib-2.0.so.0.7200.3) by 0x438FC3: att_disconnected_cb (device.c:5160) by 0x49A6C6: queue_foreach (queue.c:207) by 0x4B463B: disconnect_cb (att.c:701) by 0x5054DF: watch_callback (io-glib.c:157) by 0x495BFAE: g_main_context_dispatch (in /usr/lib64/libglib-2.0.so.0.7200.3) by 0x49B12C7: ??? (in /usr/lib64/libglib-2.0.so.0.7200.3) Address 0x6576940 is 96 bytes inside a block of size 112 free'd at 0x48480E4: free (vg_replace_malloc.c:872) by 0x48F78D: remove_interface (object.c:660) by 0x490489: g_dbus_unregister_interface (object.c:1394) by 0x397BA8: ep_remove (bap.c:1330) by 0x49ACF4: queue_remove_if (queue.c:279) by 0x49B0AC: queue_remove_all (queue.c:321) by 0x397A7C: bap_disconnect (bap.c:1339) by 0x4223E0: btd_service_disconnect (service.c:305) by 0x4974D8F: g_slist_foreach (in /usr/lib64/libglib-2.0.so.0.7200.3) by 0x438FC3: att_disconnected_cb (device.c:5160) by 0x49A6C6: queue_foreach (queue.c:207) by 0x4B463B: disconnect_cb (att.c:701) Block was alloc'd at at 0x484586F: malloc (vg_replace_malloc.c:381) by 0x49B432: util_malloc (util.c:43) by 0x39A1D9: ep_register (bap.c:563) by 0x39A1D9: pac_found (bap.c:664) by 0x4E5FEA: bap_foreach_pac (bap.c:3980) by 0x4EA437: bap_notify_ready (bap.c:2736) by 0x4EA437: bap_idle (bap.c:3711) by 0x4B52F0: idle_notify (gatt-client.c:171) by 0x49ACF4: queue_remove_if (queue.c:279) by 0x49B0AC: queue_remove_all (queue.c:321) by 0x4C092C: notify_client_idle (gatt-client.c:180) by 0x4C092C: request_unref (gatt-client.c:199) by 0x4AACB5: destroy_att_send_op (att.c:209) by 0x4B2B88: handle_rsp (att.c:862) by 0x4B2B88: can_read_data (att.c:1052) by 0x5054DF: watch_callback (io-glib.c:157) Commit: 96ab7296cb92705de8aabcdc14d81386b564d452 https://github.com/bluez/bluez/commit/96ab7296cb92705de8aabcdc14d81386b564d452 Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2023-03-07 (Tue, 07 Mar 2023) Changed paths: M src/shared/att.c Log Message: ----------- shared/att: Always queue BT_ATT_OP_MTU_REQ on the fixed channel BT_ATT_OP_MTU_REQ shall only be sent on the so called fixed channel since EATT channels shall use L2CAP procedure to update its MTU. Commit: 581aae6a2722e69479f4846e7b00c43fdf112b4c https://github.com/bluez/bluez/commit/581aae6a2722e69479f4846e7b00c43fdf112b4c Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2023-03-07 (Tue, 07 Mar 2023) Changed paths: M src/device.c Log Message: ----------- device: Fix not always storing device info When updating the device address check if the device is marked as temporary before attempting to call store_device_info otherwise it will have no effect and instead btd_device_set_temporary must be called. Commit: 3842320f450e0b40b205b8fd0ce13b8821d49b51 https://github.com/bluez/bluez/commit/3842320f450e0b40b205b8fd0ce13b8821d49b51 Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2023-03-07 (Tue, 07 Mar 2023) Changed paths: M src/gatt-database.c Log Message: ----------- gatt: Fix creating duplicated objects This checks cid before attempting to create device, if the device is using an RPA it could be that the MGMT event has not been processed yet which would lead to create a second copy of the same device using its identity address. Commit: ab3ff0d2cd5aab8bde5a99cf76e4771eefa7f7a0 https://github.com/bluez/bluez/commit/ab3ff0d2cd5aab8bde5a99cf76e4771eefa7f7a0 Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2023-03-09 (Thu, 09 Mar 2023) Changed paths: M src/main.c M src/main.conf Log Message: ----------- main: Disable EATT by default EATT is causing some problem with some platforms as they also attempt to configure it may cause a connection collision which needs to be handled by the kernel. Commit: 1033a462377d9374e9240878357620a8ad368bbf https://github.com/bluez/bluez/commit/1033a462377d9374e9240878357620a8ad368bbf Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2023-03-09 (Thu, 09 Mar 2023) Changed paths: M src/device.c M src/device.h M src/gatt-client.c M src/gatt-database.c Log Message: ----------- gatt: Use DEFER_SETUP for EATT channels This makes use of DEFER_SETUP mechanism to do the following checks before accepting the connection: - Checks a valid device object exits - Checks if initiator/central as if the peripheral start connecting it may cause collisions. - Checks if the limit of allowed connections has been reached. Commit: 4f34eeba1f5d39d1bb5d95f673ff5f02f47b0fce https://github.com/bluez/bluez/commit/4f34eeba1f5d39d1bb5d95f673ff5f02f47b0fce Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2023-03-09 (Thu, 09 Mar 2023) Changed paths: M tools/l2cap-tester.c Log Message: ----------- l2cap-tester: Add server tests for Ext-Flowctl This adds the following tests: L2CAP Ext-Flowctl Server - Success L2CAP Ext-Flowctl Server - Nval SCID L2CAP LE EATT Client - Success L2CAP LE EATT Server - Success L2CAP LE EATT Server - Reject Commit: a0847e005d33e40e8032207fd894f8422a943d91 https://github.com/bluez/bluez/commit/a0847e005d33e40e8032207fd894f8422a943d91 Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2023-03-10 (Fri, 10 Mar 2023) Changed paths: M tools/iso-tester.c Log Message: ----------- iso-tester: Update High Reliability presets This updates High Reliability presets as published in BAP 1.0.1: https://www.bluetooth.com/specifications/bap-1-0-1/ Commit: 31ab084f072c335b5fbaab1c44ecaf899f5d5dda https://github.com/bluez/bluez/commit/31ab084f072c335b5fbaab1c44ecaf899f5d5dda Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2023-03-10 (Fri, 10 Mar 2023) Changed paths: M client/player.c Log Message: ----------- client/player: Update High Reliability presets This updates High Reliability presets as published in BAP 1.0.1: https://www.bluetooth.com/specifications/bap-1-0-1/ Commit: c1dd94cc7f810e72ded5ef3886208fbe7b35483c https://github.com/bluez/bluez/commit/c1dd94cc7f810e72ded5ef3886208fbe7b35483c Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2023-03-10 (Fri, 10 Mar 2023) Changed paths: M src/shared/crypto.c M src/shared/crypto.h Log Message: ----------- shared/crypto: Add bt_crypto_sirk This adds bt_crypto_sirk which attempts to generate a unique SIRK using the following steps: - Generate a hash (k) using the str as input - Generate a hash (sirk) using vendor, product, version and source as input - Encrypt sirk using k as LTK with sef function. Commit: c2e99aefd33790a1784cb3d9d80fef748961d423 https://github.com/bluez/bluez/commit/c2e99aefd33790a1784cb3d9d80fef748961d423 Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2023-03-10 (Fri, 10 Mar 2023) Changed paths: M src/shared/ad.h Log Message: ----------- shared/ad: Add RSI data type This adds BT_AD_CSIP_RSI advertising data type. Commit: 6477522e92e33da26d27064970ab0c183ab50166 https://github.com/bluez/bluez/commit/6477522e92e33da26d27064970ab0c183ab50166 Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2023-03-10 (Fri, 10 Mar 2023) Changed paths: A doc/set-api.rst Log Message: ----------- doc: Add set-api This adds set-api.rst which documents DeviceSet interface. Commit: 5bac4cddb191c8ce28ca40747b5d7b0247ae504c https://github.com/bluez/bluez/commit/5bac4cddb191c8ce28ca40747b5d7b0247ae504c Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2023-03-10 (Fri, 10 Mar 2023) Changed paths: M doc/device-api.txt Log Message: ----------- device-api: Add Set property This adds Set property so clients are able to identify when a device belongs to a set. Commit: 3815ad119dcdc03df2a027f0eda4979d8d601846 https://github.com/bluez/bluez/commit/3815ad119dcdc03df2a027f0eda4979d8d601846 Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2023-03-10 (Fri, 10 Mar 2023) Changed paths: M Makefile.am M src/adapter.c M src/device.c M src/device.h A src/set.c A src/set.h Log Message: ----------- core: Add initial implementation of DeviceSet interface This adds the initial implementation of DeviceSet interface as documented in doc/set-api.rst. Commit: f95ffcc8b1fe67c4b0443747c08f8e9d853025cf https://github.com/bluez/bluez/commit/f95ffcc8b1fe67c4b0443747c08f8e9d853025cf Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2023-03-10 (Fri, 10 Mar 2023) Changed paths: M src/adapter.c M src/eir.c M src/eir.h Log Message: ----------- core: Check if device has RSI This checks if device is advertising an RSI and if so disregards if it is not discoverable since other members can be. Commit: 7111c0039f5c14e46c6d26c60fec2091d69549c6 https://github.com/bluez/bluez/commit/7111c0039f5c14e46c6d26c60fec2091d69549c6 Author: Sathish Narasimman <sathish.narasimman@xxxxxxxxx> Date: 2023-03-10 (Fri, 10 Mar 2023) Changed paths: M src/btd.h M src/main.c M src/main.conf Log Message: ----------- main.conf: Add CSIP profile configurable options This introduces option to configure main.conf that can be used to configure co-ordinated set identification profile. Commit: d297a03b7a6169cb556f7fcdbb1ee81648bb2b5f https://github.com/bluez/bluez/commit/d297a03b7a6169cb556f7fcdbb1ee81648bb2b5f Author: Sathish Narasimman <sathish.narasimman@xxxxxxxxx> Date: 2023-03-10 (Fri, 10 Mar 2023) Changed paths: M Makefile.am A src/shared/csip.c A src/shared/csip.h Log Message: ----------- shared/csip: Add initial code for handling CSIP This adds initial code for Coordinated Set Identification Profile. Commit: 9e1eb0a62b3f91d04fed6f79919f51684b4bdf1f https://github.com/bluez/bluez/commit/9e1eb0a62b3f91d04fed6f79919f51684b4bdf1f Author: Sathish Narasimman <sathish.narasimman@xxxxxxxxx> Date: 2023-03-10 (Fri, 10 Mar 2023) Changed paths: M Makefile.plugins M configure.ac A profiles/audio/csip.c Log Message: ----------- profiles: Add initial code for csip plugin This adds initial code for csip plugin which handles Coordinated set identification Profile and Coordinated Set Identification Service. Commit: c446a64d461b7597ccb2b6bef0dd858b8ef01fd9 https://github.com/bluez/bluez/commit/c446a64d461b7597ccb2b6bef0dd858b8ef01fd9 Author: Sathish Narasimman <sathish.narasimman@xxxxxxxxx> Date: 2023-03-10 (Fri, 10 Mar 2023) Changed paths: M tools/advtest.c Log Message: ----------- tools: Add support to generate RSI using SIRK The patch helps to generate Resolvable set identifier adv data. which can be used as ADV data during advertisement. It will be used to identify the device as part of setmember for Coordinated set identification profile. Example: $<path to advtest/>advtest -i "761FAE703ED681F0C50B34155B6434FB" SIRK: 761FAE703ED681F0C50B34155B6434FB RSI: 0x71 0xcb 0xbc 0x7e 0x01 0x84 Random: bccb71 Hash: 84017e Commit: 373bafc34ce6ed8a4dbd4276ae0d96d5753147c8 https://github.com/bluez/bluez/commit/373bafc34ce6ed8a4dbd4276ae0d96d5753147c8 Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2023-03-10 (Fri, 10 Mar 2023) Changed paths: M client/main.c Log Message: ----------- client: Add support for DeviceSet proxy Commit: 815f779aa8e477e399b78f03c0ea0e75f0270c4a https://github.com/bluez/bluez/commit/815f779aa8e477e399b78f03c0ea0e75f0270c4a Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2023-03-10 (Fri, 10 Mar 2023) Changed paths: M client/main.c Log Message: ----------- client: Use AdvertisingFlags when available This prints devices not discoverable in grey so the user are able to distict when for example set members are actually visible. Commit: 40576ac1badffb151ada76a90b89e85aa2ed9934 https://github.com/bluez/bluez/commit/40576ac1badffb151ada76a90b89e85aa2ed9934 Author: Inga Stotland <inga.stotland@xxxxxxxxx> Date: 2023-03-12 (Sun, 12 Mar 2023) Changed paths: M mesh/node.c Log Message: ----------- mesh: Fix node when loading from storage This fixes adding mandatory models (config server, remote provisioner) to a node whose configuration is being loaded from storage: mesh_model_add() was called with a wrong argument. Was: mesh_model_add(..., PRIMARY_ELE_IDX, ...); Correct: mesh_model_add(..., ele->models, ...); Compare: https://github.com/bluez/bluez/compare/a1736d8990ff...40576ac1badf
