Hi Luiz, Thanks for testing these options! > perhaps we need a dedicated flag to ensure cmd_sync cannot be schedule after a certain point This actually sounds promising to me. I would think about this. This does not happen in regular use, but one of our customers has a script to run a stress test by turning on/off the adapter and rebooting for a few cycles. Then the crash can be reproduced. If you have any new ideas, I can schedule a test. Just to confirm if you will submit the current patch or you would hold it for a solid solution? The current patch to clear the cmd_sync list indeed reduces the crash frequency. Best, Zhengping On Tue, Feb 28, 2023 at 5:53 PM Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx> wrote: > > Hi Zhengping, > > On Tue, Feb 28, 2023 at 4:18 PM Zhengping Jiang <jiangzp@xxxxxxxxxx> wrote: > > > > Hi Luiz, > > > > This looks good to me. I still have a question. Does this prevent a > > job scheduled between "hci_cmd_sync_work_list_clear(hdev);" and > > "__mgmt_power_off(hdev);"? Otherwise, the chance for a race condition > > is still there. Maybe using cancel_work_sync and re-init the workqueue > > timer is the right thing to do? > > I tried the cancel_work_sync but it doesn't work since to > cmd_sync_work itself can call hci_dev_close_sync so it deadlocks, Ive > also tried stopping new scheduling of new work based on HCI_UP flag > but that causes some tests not to run, perhaps we need a dedicated > flag to ensure cmd_sync cannot be schedule after a certain point but I > could found the exact point it is, anyway I fine leaving this to when > we actually have a more clear understanding or a reproducer. > > > Thanks, > > Zhengping > > > > On Tue, Feb 28, 2023 at 1:11 PM Luiz Augusto von Dentz > > <luiz.dentz@xxxxxxxxx> wrote: > > > > > > Hi Zhengping, > > > > > > On Mon, Feb 27, 2023 at 3:58 PM Zhengping Jiang <jiangzp@xxxxxxxxxx> wrote: > > > > > > > > Hi Luiz, > > > > > > > > Sure. Hope this helps. > > > > Here is one log from the user. > > > > > > > > [ 53.368740] ================================================================== > > > > [ 53.376167] BUG: KASAN: use-after-free in set_ssp_sync+0x44/0x154 [bluetooth] > > > > [ 53.384303] Read of size 8 at addr ffffff80b7ee0318 by task kworker/u17:0/190 > > > > [ 53.396342] CPU: 7 PID: 190 Comm: kworker/u17:0 Tainted: G W > > > > 5.15.59-lockdep #1 29eed131ef0afd42bc369a6a0ca1c69d3653699b > > > > [ 53.408868] Hardware name: Qualcomm Technologies, Inc. sc7280 CRD > > > > platform (rev5+) (DT) > > > > [ 53.417095] Workqueue: hci0 hci_cmd_sync_work [bluetooth] > > > > [ 53.422780] Call trace: > > > > [ 53.425310] dump_backtrace+0x0/0x424 > > > > [ 53.429108] show_stack+0x20/0x2c > > > > > > > > [ 53.432534] dump_stack_lvl+0x84/0xb4 > > > > [ 53.436514] print_address_description+0x30/0x2fc > > > > [ 53.441369] kasan_report+0x15c/0x19c > > > > [ 53.445975] __asan_report_load8_noabort+0x44/0x50 > > > > [ 53.450910] set_ssp_sync+0x44/0x154 [bluetooth > > > > 34f6fa2bbf49f3d7faf6ea04e8755ae16590a6b3] > > > > [ 53.460136] hci_cmd_sync_work+0x1c8/0x2c8 [bluetooth > > > > 34f6fa2bbf49f3d7faf6ea04e8755ae16590a6b3] > > > > [ 53.472214] process_one_work+0x59c/0xa88 > > > > [ 53.476990] worker_thread+0x81c/0xd18 > > > > [ 53.480854] kthread+0x2d4/0x3d8 > > > > [ 53.484272] ret_from_fork+0x10/0x20 > > > > > > > > [ 53.489733] Allocated by task 1162: > > > > [ 53.493336] kasan_save_stack+0x38/0x68 > > > > [ 53.498115] __kasan_kmalloc+0xb4/0xd0 > > > > [ 53.501993] kmem_cache_alloc_trace+0x29c/0x374 > > > > [ 53.506661] mgmt_pending_new+0x74/0x200 [bluetooth] > > > > [ 53.511905] mgmt_pending_add+0x28/0xec [bluetooth] > > > > [ 53.517059] set_ssp+0x2d8/0x5b0 [bluetooth] > > > > [ 53.521575] hci_mgmt_cmd+0x5c4/0x8b0 [bluetooth] > > > > [ 53.526538] hci_sock_sendmsg+0x28c/0x95c [bluetooth] > > > > [ 53.531850] sock_sendmsg+0xb4/0xd8 > > > > [ 53.535454] sock_write_iter+0x1c0/0x2d0 > > > > [ 53.539494] do_iter_readv_writev+0x350/0x4e0 > > > > [ 53.543980] do_iter_write+0xf0/0x2e4 > > > > [ 53.547747] vfs_writev+0xd0/0x13c > > > > [ 53.551254] do_writev+0xe8/0x1fc > > > > [ 53.554672] __arm64_sys_writev+0x84/0x98 > > > > [ 53.558805] invoke_syscall+0x78/0x20c > > > > [ 53.562665] el0_svc_common+0x12c/0x2f0 > > > > [ 53.566618] do_el0_svc+0x94/0x13c > > > > [ 53.570125] el0_svc+0x5c/0x108 > > > > [ 53.573374] el0t_64_sync_handler+0x78/0x108 > > > > [ 53.577773] el0t_64_sync+0x1a4/0x1a8 > > > > > > > > [ 53.583089] Freed by task 3207: > > > > [ 53.586325] kasan_save_stack+0x38/0x68 > > > > [ 53.590282] kasan_set_track+0x28/0x3c > > > > [ 53.594153] kasan_set_free_info+0x28/0x4c > > > > [ 53.598369] ____kasan_slab_free+0x138/0x17c > > > > [ 53.602767] __kasan_slab_free+0x18/0x28 > > > > [ 53.606803] slab_free_freelist_hook+0x188/0x260 > > > > [ 53.611559] kfree+0x138/0x29c > > > > [ 53.614708] mgmt_pending_free+0xac/0xdc [bluetooth] > > > > [ 53.619948] mgmt_pending_remove+0xd8/0xf0 [bluetooth] > > > > [ 53.625357] cmd_complete_rsp+0xc8/0x178 [bluetooth] > > > > [ 53.630586] mgmt_pending_foreach+0xa8/0xf8 [bluetooth] > > > > [ 53.636076] __mgmt_power_off+0x114/0x26c [bluetooth] > > > > [ 53.641390] hci_dev_close_sync+0x314/0x814 [bluetooth] > > > > [ 53.646882] hci_dev_do_close+0x3c/0x7c [bluetooth] > > > > [ 53.652017] hci_dev_close+0xa4/0x15c [bluetooth] > > > > [ 53.656980] hci_sock_ioctl+0x298/0x444 [bluetooth] > > > > [ 53.662117] sock_do_ioctl+0xd0/0x1e8 > > > > [ 53.665900] sock_ioctl+0x4fc/0x72c > > > > [ 53.669500] __arm64_sys_ioctl+0x118/0x154 > > > > [ 53.673726] invoke_syscall+0x78/0x20c > > > > [ 53.677587] el0_svc_common+0x12c/0x2f0 > > > > [ 53.681533] do_el0_svc+0x94/0x13c > > > > [ 53.685043] el0_svc+0x5c/0x108 > > > > [ 53.688278] el0t_64_sync_handler+0x78/0x108 > > > > [ 53.692677] el0t_64_sync+0x1a4/0x1a8 > > > > > > > > [ 53.697988] Last potentially related work creation: > > > > [ 53.703009] kasan_save_stack+0x38/0x68 > > > > [ 53.706962] kasan_record_aux_stack+0x104/0x130 > > > > [ 53.711622] __call_rcu+0x14c/0x860 > > > > [ 53.715212] call_rcu+0x18/0x24 > > > > [ 53.718448] sk_filter_uncharge+0xc0/0x120 > > > > [ 53.722667] __sk_destruct+0xb4/0x4a8 > > > > [ 53.726435] sk_destruct+0x78/0xa0 > > > > [ 53.729941] __sk_free+0x190/0x270 > > > > [ 53.733453] sk_free+0x54/0x8c > > > > [ 53.736603] deferred_put_nlk_sk+0x1d4/0x20c > > > > [ 53.741000] rcu_do_batch+0x3e8/0xd08 > > > > [ 53.744772] nocb_cb_wait+0xc8/0xa3c > > > > [ 53.748453] rcu_nocb_cb_kthread+0x48/0x134 > > > > [ 53.752768] kthread+0x2d4/0x3d8 > > > > [ 53.756098] ret_from_fork+0x10/0x20 > > > > > > > > This is another one at a different function but with the same signature. > > > > > > > > [ 43.363512] ================================================================== > > > > [ 43.370966] BUG: KASAN: use-after-free in > > > > mgmt_remove_adv_monitor_sync+0x40/0xcc [bluetooth] > > > > [ 43.379813] Read of size 8 at addr ffffff8096c28d18 by task kworker/u17:0/192 > > > > [ 43.387158] > > > > [ 43.388705] CPU: 6 PID: 192 Comm: kworker/u17:0 Tainted: G W > > > > 5.15.59-lockdep #1 59f35e3dfc07f6688b084869895c7a39892c891a > > > > localhost ~ # [ 43.410184] Workqueue: hci0 hci_cmd_sync_work [bluetooth] > > > > > > > > [ 43.418887] Call trace: > > > > [ 43.422407] dump_backtrace+0x0/0x424 > > > > [ 43.426191] show_stack+0x20/0x2c > > > > [ 43.429608] dump_stack_lvl+0x84/0xb4 > > > > [ 43.433395] print_address_description+0x30/0x2fc > > > > [ 43.438243] kasan_report+0x15c/0x19c > > > > [ 43.442070] __asan_report_load8_noabort+0x44/0x50 > > > > hciconfig hci0 up > > > > [ 43.447009] mgmt_remove_adv_monitor_sync+0x40/0xcc [bluetooth > > > > 8dae3a82177133cfa9626e7322b3b0c8f665102d] > > > > [ 43.458568] hci_cmd_sync_work+0x1bc/0x2bc [bluetooth > > > > 8dae3a82177133cfa9626e7322b3b0c8f665102d] > > > > [ 43.467656] process_one_work+0x59c/0xa88 > > > > [ 43.472530] worker_thread+0x81c/0xd18 > > > > [ 43.476410] kthread+0x2d4/0x3d8 > > > > localhost ~ # [ 43.479753] ret_from_fork+0x10/0x20 > > > > [ 43.486588] > > > > [ 43.488156] Allocated by task 1118: > > > > [ 43.491751] kasan_save_stack+0x38/0x68 > > > > [ 43.495709] __kasan_kmalloc+0xb4/0xd0 > > > > [ 43.499577] kmem_cache_alloc_trace+0x29c/0x374 > > > > [ 43.504238] mgmt_pending_new+0x74/0x200 [bluetooth] > > > > sleep 2[ 43.509509] mgmt_pending_add+0x28/0xec [bluetooth] > > > > > > > > [ 43.515244] remove_adv_monitor+0xf8/0x174 [bluetooth] > > > > [ 43.521533] hci_mgmt_cmd+0x5c4/0x8b0 [bluetooth] > > > > [ 43.526527] hci_sock_sendmsg+0x28c/0x95c [bluetooth] > > > > [ 43.531873] sock_sendmsg+0xb4/0xd8 > > > > [ 43.535472] sock_write_iter+0x1c0/0x2d0 > > > > [ 43.539519] do_iter_readv_writev+0x350/0x4e0 > > > > [ 43.544012] do_iter_write+0xf0/0x2e4 > > > > [ 43.547788] vfs_writev+0xd0/0x13c > > > > [ 43.551295] do_writev+0xe8/0x1fc > > > > [ 43.554710] __arm64_sys_writev+0x84/0x98 > > > > [ 43.558838] invoke_syscall+0x78/0x20c > > > > [ 43.562709] el0_svc_common+0x12c/0x2f0 > > > > [ 43.566654] do_el0_svc+0x94/0x13c > > > > [ 43.570155] el0_svc+0x5c/0x108 > > > > [ 43.573391] el0t_64_sync_handler+0x78/0x108 > > > > [ 43.577785] el0t_64_sync+0x1a4/0x1a8 > > > > [ 43.581564] > > > > [ 43.583115] Freed by task 3217: > > > > [ 43.586356] kasan_save_stack+0x38/0x68 > > > > [ 43.590314] kasan_set_track+0x28/0x3c > > > > [ 43.594180] kasan_set_free_info+0x28/0x4c > > > > [ 43.598396] ____kasan_slab_free+0x138/0x17c > > > > [ 43.602794] __kasan_slab_free+0x18/0x28 > > > > [ 43.606838] slab_free_freelist_hook+0x188/0x260 > > > > [ 43.611591] kfree+0x138/0x29c > > > > [ 43.614741] mgmt_pending_free+0xac/0xdc [bluetooth] > > > > [ 43.620003] mgmt_pending_remove+0xd8/0xf0 [bluetooth] > > > > [ 43.625434] cmd_complete_rsp+0xc8/0x178 [bluetooth] > > > > [ 43.630686] mgmt_pending_foreach+0xa8/0xf8 [bluetooth] > > > > [ 43.636198] __mgmt_power_off+0x114/0x26c [bluetooth] > > > > [ 43.641532] hci_dev_close_sync+0x2ec/0x7ec [bluetooth] > > > > [ 43.647049] hci_dev_do_close+0x3c/0x7c [bluetooth] > > > > [ 43.652209] hci_dev_close+0xac/0x164 [bluetooth] > > > > [ 43.657190] hci_sock_ioctl+0x298/0x444 [bluetooth] > > > > [ 43.662353] sock_do_ioctl+0xd0/0x1e8 > > > > [ 43.666134] sock_ioctl+0x4fc/0x72c > > > > [ 43.669736] __arm64_sys_ioctl+0x118/0x154 > > > > [ 43.673961] invoke_syscall+0x78/0x20c > > > > [ 43.677820] el0_svc_common+0x12c/0x2f0 > > > > [ 43.681770] do_el0_svc+0x94/0x13c > > > > [ 43.685278] el0_svc+0x5c/0x108 > > > > [ 43.688514] el0t_64_sync_handler+0x78/0x108 > > > > [ 43.692913] el0t_64_sync+0x1a4/0x1a8 > > > > > > > > Thanks, > > > > Zhengping > > > > > > Ok, how about we do something like the following: > > > > > > https://gist.github.com/Vudentz/365d664275e4d2e2af157e47f0502f50 > > > > > > The actual real culprit seem to be __mgmt_power_off does cleanup > > > mgmt_pending but that is still accessible via cmd_sync_work_list, this > > > is probably how hci_request was designed but in case of cmd_sync we > > > normally have the data as part of cmd_sync_work_list. > > > > > > > On Mon, Feb 27, 2023 at 3:41 PM Luiz Augusto von Dentz > > > > <luiz.dentz@xxxxxxxxx> wrote: > > > > > > > > > > Hi Zhengping, > > > > > > > > > > On Sun, Feb 26, 2023 at 11:18 PM Zhengping Jiang <jiangzp@xxxxxxxxxx> wrote: > > > > > > > > > > > > Hi Luiz, > > > > > > > > > > > > I have a question. Given that each command in the cmd_sync queue > > > > > > should clean up the memory in a callback function. I was wondering if > > > > > > the call to cmd_complete_rsp in __mgmt_power_off function is still > > > > > > necessary? Will this always risk a race condition that cmd has been > > > > > > released when the complete callback or _sync function is run? > > > > > > > > > > Not sure I follow you here, do you have a stack trace when the user > > > > > after free occurs? > > > > > > > > > > > Thanks, > > > > > > Zhengping > > > > > > > > > > > > On Fri, Feb 24, 2023 at 2:37 PM Zhengping Jiang <jiangzp@xxxxxxxxxx> wrote: > > > > > > > > > > > > > > Hi Luiz, > > > > > > > > > > > > > > > Any particular reason why you are not using hci_cmd_sync_clear > > > > > > > > instead? > > > > > > > > > > > > > > That is a good question and we used hci_cmd_sync_clear in the first > > > > > > > version, but it will clear the queue and also close the timer. As a > > > > > > > result, when the adapter is turned on again, the timer will not > > > > > > > schedule any new jobs. So the option is to use hci_cmd_sync_clear and > > > > > > > re-initiate the queue or to write a new function which only clears the > > > > > > > queue. > > > > > > > > > > > > > > > We also may want to move the clearing logic to > > > > > > > > hci_dev_close_sync since it should be equivalent to > > > > > > > > hci_request_cancel_all. > > > > > > > > > > > > > > I actually have a question here. I saw > > > > > > > "drain_workqueue(hdev->workqueue)" in hci_dev_close_sync and thought > > > > > > > it should force clearing the cmd_sync queue. But it seems cannot > > > > > > > prevent the use-after-free situation. > > > > > > > > > > > > > > Any suggestions to improve the solution? > > > > > > > > > > > > > > Thanks, > > > > > > > Zhengping > > > > > > > > > > > > > > > > > > > > > On Fri, Feb 24, 2023 at 1:02 PM Luiz Augusto von Dentz > > > > > > > <luiz.dentz@xxxxxxxxx> wrote: > > > > > > > > > > > > > > > > Hi Zhengping, > > > > > > > > > > > > > > > > On Fri, Feb 24, 2023 at 11:53 AM Zhengping Jiang <jiangzp@xxxxxxxxxx> wrote: > > > > > > > > > > > > > > > > > > Clear cmd_sync_work queue before clearing the mgmt cmd list to avoid > > > > > > > > > racing conditions which cause use-after-free. > > > > > > > > > > > > > > > > > > When powering off the adapter, the mgmt cmd list will be cleared. If a > > > > > > > > > work is queued in the cmd_sync_work queue at the same time, it will > > > > > > > > > cause the risk of use-after-free, as the cmd pointer is not checked > > > > > > > > > before use. > > > > > > > > > > > > > > > > > > Signed-off-by: Zhengping Jiang <jiangzp@xxxxxxxxxx> > > > > > > > > > --- > > > > > > > > > > > > > > > > > > Changes in v2: > > > > > > > > > - Add function to clear the queue without stop the timer > > > > > > > > > > > > > > > > > > Changes in v1: > > > > > > > > > - Clear cmd_sync_work queue before clearing the mgmt cmd list > > > > > > > > > > > > > > > > > > net/bluetooth/hci_sync.c | 21 ++++++++++++++++++++- > > > > > > > > > 1 file changed, 20 insertions(+), 1 deletion(-) > > > > > > > > > > > > > > > > > > diff --git a/net/bluetooth/hci_sync.c b/net/bluetooth/hci_sync.c > > > > > > > > > index 117eedb6f709..b70365dfff0c 100644 > > > > > > > > > --- a/net/bluetooth/hci_sync.c > > > > > > > > > +++ b/net/bluetooth/hci_sync.c > > > > > > > > > @@ -636,6 +636,23 @@ void hci_cmd_sync_init(struct hci_dev *hdev) > > > > > > > > > INIT_DELAYED_WORK(&hdev->adv_instance_expire, adv_timeout_expire); > > > > > > > > > } > > > > > > > > > > > > > > > > > > +static void hci_pend_cmd_sync_clear(struct hci_dev *hdev) > > > > > > > > > +{ > > > > > > > > > + struct hci_cmd_sync_work_entry *entry, *tmp; > > > > > > > > > + > > > > > > > > > + mutex_lock(&hdev->cmd_sync_work_lock); > > > > > > > > > + list_for_each_entry_safe(entry, tmp, &hdev->cmd_sync_work_list, list) { > > > > > > > > > + if (entry->destroy) { > > > > > > > > > + hci_req_sync_lock(hdev); > > > > > > > > > + entry->destroy(hdev, entry->data, -ECANCELED); > > > > > > > > > + hci_req_sync_unlock(hdev); > > > > > > > > > + } > > > > > > > > > + list_del(&entry->list); > > > > > > > > > + kfree(entry); > > > > > > > > > + } > > > > > > > > > + mutex_unlock(&hdev->cmd_sync_work_lock); > > > > > > > > > +} > > > > > > > > > + > > > > > > > > > void hci_cmd_sync_clear(struct hci_dev *hdev) > > > > > > > > > { > > > > > > > > > struct hci_cmd_sync_work_entry *entry, *tmp; > > > > > > > > > @@ -4842,8 +4859,10 @@ int hci_dev_close_sync(struct hci_dev *hdev) > > > > > > > > > > > > > > > > > > if (!auto_off && hdev->dev_type == HCI_PRIMARY && > > > > > > > > > !hci_dev_test_flag(hdev, HCI_USER_CHANNEL) && > > > > > > > > > - hci_dev_test_flag(hdev, HCI_MGMT)) > > > > > > > > > + hci_dev_test_flag(hdev, HCI_MGMT)) { > > > > > > > > > + hci_pend_cmd_sync_clear(hdev); > > > > > > > > > > > > > > > > Any particular reason why you are not using hci_cmd_sync_clear > > > > > > > > instead? We also may want to move the clearing logic to > > > > > > > > hci_dev_close_sync since it should be equivalent to > > > > > > > > hci_request_cancel_all. > > > > > > > > > > > > > > > > > __mgmt_power_off(hdev); > > > > > > > > > + } > > > > > > > > > > > > > > > > > > hci_inquiry_cache_flush(hdev); > > > > > > > > > hci_pend_le_actions_clear(hdev); > > > > > > > > > -- > > > > > > > > > 2.39.2.722.g9855ee24e9-goog > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > > > Luiz Augusto von Dentz > > > > > > > > > > > > > > > > > > > > -- > > > > > Luiz Augusto von Dentz > > > > > > > > > > > > -- > > > Luiz Augusto von Dentz > > > > -- > Luiz Augusto von Dentz
