Re: [PATCH v4 2/3] dt-bindings: net: bluetooth: Add NXP bluetooth support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 21/02/2023 17:25, Neeraj Sanjay Kale wrote:
> Add binding document for NXP bluetooth chipsets attached over UART.
> 
> Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@xxxxxxx>
> ---
> v2: Resolved dt_binding_check errors. (Rob Herring)
> v2: Modified description, added specific compatibility devices, corrected indentations. (Krzysztof Kozlowski)
> v3: Modified description, renamed file (Krzysztof Kozlowski)
> v4: Resolved dt_binding_check errors, corrected indentation. (Rob
> Herring, Krzysztof Kozlowski)
> ---
>  .../bindings/net/bluetooth/nxp,w8987-bt.yaml  | 38 +++++++++++++++++++
>  MAINTAINERS                                   |  6 +++
>  2 files changed, 44 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/bluetooth/nxp,w8987-bt.yaml
> 
> diff --git a/Documentation/devicetree/bindings/net/bluetooth/nxp,w8987-bt.yaml b/Documentation/devicetree/bindings/net/bluetooth/nxp,w8987-bt.yaml
> new file mode 100644
> index 000000000000..de361ce4ab73
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/bluetooth/nxp,w8987-bt.yaml
> @@ -0,0 +1,38 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/bluetooth/nxp,w8987-bt.yaml#

I think list of compatibles changed... now they are nxp,88w8987-bt, so
shouldn't the filename be "nxp,88w8987-bt.yaml"?

> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: NXP Bluetooth chips
> +
> +description:
> +  This binding describes UART-attached NXP bluetooth chips.
> +  These chips are dual-radio chips supporting WiFi and Bluetooth.
> +  The bluetooth works on standard H4 protocol over 4-wire UART.
> +  The RTS and CTS lines are used during FW download.
> +  To enable power save mode, the host asserts break signal
> +  over UART-TX line to put the chip into power save state.
> +  De-asserting break wakes-up the BT chip.
> +
> +maintainers:
> +  - Neeraj Sanjay Kale <neeraj.sanjaykale@xxxxxxx>
> +
> +properties:
> +  compatible:
> +    enum:
> +      - nxp,88w8987-bt
> +      - nxp,88w8997-bt
> +
> +required:
> +  - compatible
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    uart2 {

This is a friendly reminder during the review process.

It seems my previous comments were not fully addressed. Maybe my
feedback got lost between the quotes, maybe you just forgot to apply it.
Please go back to the previous discussion and either implement all
requested changes or keep discussing them.

Thank you.

Best regards,
Krzysztof




[Index of Archives]     [Bluez Devel]     [Linux Wireless Networking]     [Linux Wireless Personal Area Networking]     [Linux ATH6KL]     [Linux USB Devel]     [Linux Media Drivers]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Big List of Linux Books]

  Powered by Linux