Hi Francesco, On Mon, Feb 13, 2023 at 4:09 AM Francesco Dolcini <francesco@xxxxxxxxxx> wrote: > > From: Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx> > > Add serdev support for the 88W8997 from NXP (previously Marvell). It includes > support for changing the baud rate. The command to change the baud rate is > taken from the user manual UM11483 Rev. 9 in section 7 (Bring-up of Bluetooth > interfaces) from NXP. > > v3: > - Use __hci_cmd_sync_status instead of __hci_cmd_sync > > v2: > - Fix the subject as pointed out by Krzysztof. Thanks! > - Fix indentation in marvell-bluetooth.yaml > - Fix compiler warning for kernel builds without CONFIG_OF enabled > > Stefan Eichenberger (5): > dt-bindings: bluetooth: marvell: add 88W8997 > dt-bindings: bluetooth: marvell: add max-speed property > Bluetooth: hci_mrvl: use maybe_unused macro for device tree ids > Bluetooth: hci_mrvl: Add serdev support for 88W8997 > arm64: dts: imx8mp-verdin: add 88W8997 serdev to uart4 > > .../bindings/net/marvell-bluetooth.yaml | 20 ++++- > .../dts/freescale/imx8mp-verdin-wifi.dtsi | 5 ++ > drivers/bluetooth/hci_mrvl.c | 90 ++++++++++++++++--- > 3 files changed, 104 insertions(+), 11 deletions(-) > > -- > 2.25.1 There seems to be missing one patch 5/5: https://patchwork.kernel.org/project/bluetooth/list/?series=721269 Other than that the Bluetooth parts seem fine, and perhaps can be merged if the patch above is not really required. -- Luiz Augusto von Dentz
