Branch: refs/heads/master Home: https://github.com/bluez/bluez Commit: 25d6c9a0468f4e733fd314ec97d8eafc102ae22e https://github.com/bluez/bluez/commit/25d6c9a0468f4e733fd314ec97d8eafc102ae22e Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2022-12-02 (Fri, 02 Dec 2022) Changed paths: M monitor/bt.h M monitor/packet.c Log Message: ----------- monitor: Decode vendor codecs of BT_HCI_CMD_READ_LOCAL_CODECS_V2 This attempts to decode the vendor codecs includec in the response of BT_HCI_CMD_READ_LOCAL_CODECS_V2. Commit: 43d71b8410ff8cf1abcb4ec5353041268f49b037 https://github.com/bluez/bluez/commit/43d71b8410ff8cf1abcb4ec5353041268f49b037 Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2022-12-02 (Fri, 02 Dec 2022) Changed paths: M src/shared/gatt-client.c Log Message: ----------- shared/gatt-client: Fix not checking valid ranges When attempting to update discovery ranges the code shall verify if the range is still valid (handles != 0x0000 and start < end). Commit: b6a6f6a8a8592d21d558ffab715c4551c29a36f1 https://github.com/bluez/bluez/commit/b6a6f6a8a8592d21d558ffab715c4551c29a36f1 Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2022-12-02 (Fri, 02 Dec 2022) Changed paths: M src/shared/bap.c Log Message: ----------- shared/bap: Fix not reading all instances of PAC Sinks/Sources Both PAC Sink and Source are allowed to have multiple instances: - The server wanted to support a smaller maximum transmission unit (ATT_MTU, as defined in Volume 3, Part F, Section 3.2.8 in [2]) size. Exposing all supported PAC records in a single Sink PAC characteristic would require the server to increase its supported Maximum Transmission Unit (MTU) size to a value the server considered excessive. - The server wanted to expose support for proprietary audio capabilities (such as vendor-specific audio codecs, as denoted by the Codec_ID parameter value) separately from support for non-vendor-specific audio capabilities and used separate Sink PAC characteristics to expose such support. - The server wanted to minimize the amount of data to be transferred, when sending notifications to a client that the Sink PAC characteristic value changed, by exposing the audio capabilities likely to change quicker than others in separate Sink PAC characteristics. Commit: 636c78666031c12bf73a02bfeb531c3a633608ee https://github.com/bluez/bluez/commit/636c78666031c12bf73a02bfeb531c3a633608ee Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2022-12-02 (Fri, 02 Dec 2022) Changed paths: M src/shared/bap.c Log Message: ----------- shared/bap: Fix initiating QoS and Enable procedures as server According to Table 3.2: ASE state machine transition these procedures can only be initated by clients. Commit: 7642669e4496563ff7c945583c5736364b8a6c37 https://github.com/bluez/bluez/commit/7642669e4496563ff7c945583c5736364b8a6c37 Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2022-12-02 (Fri, 02 Dec 2022) Changed paths: M client/player.c Log Message: ----------- client/player: Add support for custom preset This adds support for a custom preset which asks the user to enter its configuration: [bluetooth]# endpoint.presets 00002bc9-0000-1000-8000-00805f9b34fb custom [Codec] Enter frequency (Khz): 48 [Codec] Enter frame duration (ms): 10 [Codec] Enter channel allocation: 0x000000003 [Codec] Enter frame length: 100 [QoS] Enter Target Latency (Low, Balance, High): Low [QoS] Enter SDU Interval (us): 10000 [QoS] Enter Framing (Unframed, Framed): Unframed [QoS] Enter PHY (1M, 2M): 2M [QoS] Enter Max SDU: 200 [QoS] Enter RTN: 3 [QoS] Enter Max Transport Latency (ms): 20 [QoS] Enter Presentation Delay (us): 10000 Commit: 707a547e4d68fd4e848d349142746587de972039 https://github.com/bluez/bluez/commit/707a547e4d68fd4e848d349142746587de972039 Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2022-12-02 (Fri, 02 Dec 2022) Changed paths: M profiles/audio/bap.c Log Message: ----------- bap: Fix not able to reconfigure While attempting to configure QoS setting the request id is not reset to 0 when a response is received which prevents any the QoS to be reconfigured. Commit: 7280f4357cf6c72bf51ebe52739143e0b9203de2 https://github.com/bluez/bluez/commit/7280f4357cf6c72bf51ebe52739143e0b9203de2 Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2022-12-02 (Fri, 02 Dec 2022) Changed paths: M profiles/audio/media.c Log Message: ----------- media: Fix crash when transport configuration changes In case of BAP the same transport may be reconfigured multiple times which means it would appears multiple times on endpoint->transports leading to a crash when disconnecting as the code would attempt to destroy the same object multiple times. Commit: b907befc2d801f1a7607cd651369a67cceef8d33 https://github.com/bluez/bluez/commit/b907befc2d801f1a7607cd651369a67cceef8d33 Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2022-12-02 (Fri, 02 Dec 2022) Changed paths: M src/shared/bap.c Log Message: ----------- shared/bap: Merge PAC records of the same type/codec This attempts to merge PAC records which contain the same type and codec to simplify the matching with client endpoints so all capabilities and metadata are match at once instead of for each PAC record. Commit: f28433d448fa9ae33305d87f112a1b8abb7c6b17 https://github.com/bluez/bluez/commit/f28433d448fa9ae33305d87f112a1b8abb7c6b17 Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2022-12-02 (Fri, 02 Dec 2022) Changed paths: M profiles/audio/bap.c M profiles/audio/media.c Log Message: ----------- bap: Fix not waiting Endpoint.SelectProperties If there are multiple Endpoint.SelectProperties wait them to complete before attempting to proceed to configure a stream otherwise streams may not be linked properly and may end up creating multiple CIS instead. Commit: a4bde19d3bd809337eacead3f2c5922a873cee9d https://github.com/bluez/bluez/commit/a4bde19d3bd809337eacead3f2c5922a873cee9d Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2022-12-02 (Fri, 02 Dec 2022) Changed paths: M Makefile.tools M client/main.c M client/player.c A client/print.c A client/print.h Log Message: ----------- client: Move common print_* functions to its own file This move common print_* functions to its own file so they can be properly reused instead of duplicating the code. Commit: d84ce72a543e090665a33ecac64b604805d2ec4c https://github.com/bluez/bluez/commit/d84ce72a543e090665a33ecac64b604805d2ec4c Author: Allen Webb <allenwebb@xxxxxxxxxx> Date: 2022-12-02 (Fri, 02 Dec 2022) Changed paths: M src/bluetooth.ver Log Message: ----------- bluetooth.ver: Export sanitizer symbols Fix llvm sanitizer support by not hiding sanitizer related symbols. Compare: https://github.com/bluez/bluez/compare/9f5036834ba2...d84ce72a543e
