Branch: refs/heads/master Home: https://github.com/bluez/bluez Commit: b3f76b30ec9d0e06d44a9240698698926df9e333 https://github.com/bluez/bluez/commit/b3f76b30ec9d0e06d44a9240698698926df9e333 Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2022-10-28 (Fri, 28 Oct 2022) Changed paths: M tools/test-runner.c Log Message: ----------- tools/test-runner: Remove bluetooth.enable_ecred L2CAP ECRED is now enabled by default by the following kernel change: 98f18bb78b7d ("Bluetooth: Add CONFIG_BT_LE_L2CAP_ECRED") Commit: d9253248363b995e44c1f5e393ed1c7aa4ec81ce https://github.com/bluez/bluez/commit/d9253248363b995e44c1f5e393ed1c7aa4ec81ce Author: Marek Vasut <marex@xxxxxxx> Date: 2022-11-01 (Tue, 01 Nov 2022) Changed paths: M tools/hciattach.h M tools/hciattach_bcm43xx.c M tools/hciattach_qualcomm.c M tools/hciattach_tialt.c Log Message: ----------- tools: Make hciattach_* firmware path build-time configurable Make hciattach_qualcomm.c and hciattach_tialt.c behave the same way as hciattach_bcm43xx.c does, where FIRMWARE_DIR can be overridden at build time by using -DFIRMWARE_DIR= CFLAGS. Commit: f9657b86ddd3008768b3f6fef2c94eec46d976b5 https://github.com/bluez/bluez/commit/f9657b86ddd3008768b3f6fef2c94eec46d976b5 Author: Marek Vasut <marex@xxxxxxx> Date: 2022-11-01 (Tue, 01 Nov 2022) Changed paths: M tools/hciattach_qualcomm.c Log Message: ----------- tools: Switch hciattach_qualcomm to FAILIF macro completely Use the FAILIF() macro consistently to avoid unused variable n warnings. Commit: 3a3298e29b4468bd6cbf74de6d677c052a4e960a https://github.com/bluez/bluez/commit/3a3298e29b4468bd6cbf74de6d677c052a4e960a Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2022-11-04 (Fri, 04 Nov 2022) Changed paths: M monitor/att.c M monitor/l2cap.h Log Message: ----------- monitor/att: Add handler support for Read by Type This adds handler support for Read by Type so it can further decode the values when the procedure is used. Commit: 7e0e08ca5396bd9e40f25fac74018963f6516c61 https://github.com/bluez/bluez/commit/7e0e08ca5396bd9e40f25fac74018963f6516c61 Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2022-11-04 (Fri, 04 Nov 2022) Changed paths: M monitor/att.c Log Message: ----------- monitor/att: Add support for decoding Characteristic Declaration This adds supports for decoding the so called Characteristic Declaration (0x2803): > ACL Data RX: Handle 3585 flags 0x02 dlen 76 ATT: Read By Type Response (0x09) len 71 Attribute data length: 7 Attribute data list: 10 entries Handle: 0x0002 Value: 200300052a Properties: 0x20 Indicate (0x20) Value Handle: 0x0003 Value UUID: Service Changed (0x2a05) Handle: 0x0015 Value: 021600002a Properties: 0x02 Read (0x02) Value Handle: 0x0016 Value UUID: Device Name (0x2a00) Handle: 0x0017 Value: 021800012a Properties: 0x02 Read (0x02) Value Handle: 0x0018 Value UUID: Appearance (0x2a01) Handle: 0x0019 Value: 021a00a62a Properties: 0x02 Read (0x02) Value Handle: 0x001a Value UUID: Central Address Resolution (0x2aa6) Handle: 0x0029 Value: 102a00372a Properties: 0x10 Notify (0x10) Value Handle: 0x002a Value UUID: Heart Rate Measurement (0x2a37) Handle: 0x002c Value: 022d00382a Properties: 0x02 Read (0x02) Value Handle: 0x002d Value UUID: Body Sensor Location (0x2a38) Handle: 0x002e Value: 082f00392a Properties: 0x08 Write (0x08) Value Handle: 0x002f Value UUID: Heart Rate Control Point (0x2a39) Handle: 0x0031 Value: 0a32008a2a Properties: 0x0a Read (0x02) Write (0x08) Value Handle: 0x0032 Value UUID: First Name (0x2a8a) Handle: 0x0033 Value: 0a3400902a Properties: 0x0a Read (0x02) Write (0x08) Value Handle: 0x0034 Value UUID: Last Name (0x2a90) Handle: 0x0035 Value: 0a36008c2a Properties: 0x0a Read (0x02) Write (0x08) Value Handle: 0x0036 Value UUID: Gender (0x2a8c) Commit: 3bd7df28cbbccd59cca5c35e95c4275229b0badf https://github.com/bluez/bluez/commit/3bd7df28cbbccd59cca5c35e95c4275229b0badf Author: Marcel Holtmann <marcel@xxxxxxxxxxxx> Date: 2022-11-07 (Mon, 07 Nov 2022) Changed paths: M monitor/packet.c Log Message: ----------- monitor: Add some definitions from Bluetooth 5.3 Core specification Commit: 532c903aa423291e32f1328a69b053cb8185d4f9 https://github.com/bluez/bluez/commit/532c903aa423291e32f1328a69b053cb8185d4f9 Author: Marcel Holtmann <marcel@xxxxxxxxxxxx> Date: 2022-11-10 (Thu, 10 Nov 2022) Changed paths: M Makefile.am Log Message: ----------- build: Update library version Commit: 63b01d0b0661d6a0048107dcb9e6f12ceac409e0 https://github.com/bluez/bluez/commit/63b01d0b0661d6a0048107dcb9e6f12ceac409e0 Author: Marcel Holtmann <marcel@xxxxxxxxxxxx> Date: 2022-11-10 (Thu, 10 Nov 2022) Changed paths: M ChangeLog M configure.ac Log Message: ----------- Release 5.66 Commit: b3a8f8fea99bc47abcf91d79f611fc7c1fce5c4b https://github.com/bluez/bluez/commit/b3a8f8fea99bc47abcf91d79f611fc7c1fce5c4b Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2022-11-15 (Tue, 15 Nov 2022) Changed paths: M monitor/att.c Log Message: ----------- monitor/att: Fix not dequeing att_read on error response If a read/read by type fails it needs to be dequeued otherwise it can cause the next operation of the same type to return the wrong request and possible decoding as if it was a different attribute type. Commit: 7c2e276d9e7c27e863d2cb9ebcf3be99b3c4fb4e https://github.com/bluez/bluez/commit/7c2e276d9e7c27e863d2cb9ebcf3be99b3c4fb4e Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2022-11-15 (Tue, 15 Nov 2022) Changed paths: M src/shared/util.c M src/shared/util.h Log Message: ----------- shared/util: Add iovec helpers This adds iovec helpers functions. Commit: f96bccd80979283e7bf99a07a6dd9af3110cdf42 https://github.com/bluez/bluez/commit/f96bccd80979283e7bf99a07a6dd9af3110cdf42 Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2022-11-15 (Tue, 15 Nov 2022) Changed paths: M src/shared/bap.c Log Message: ----------- shared/bap: Make use of util_iov helpers This make use of util_iov helpers instead of reimplementing them. Commit: 918c73acb778e2359abcf5c3fa4c6528164b3910 https://github.com/bluez/bluez/commit/918c73acb778e2359abcf5c3fa4c6528164b3910 Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2022-11-15 (Tue, 15 Nov 2022) Changed paths: M src/shared/tester.c M src/shared/tester.h Log Message: ----------- shared/tester: Add tester_io_set_complete_func This adds tester_io_set_complete_func which can be used to set a callback when all iovec has been sent/received. Commit: 7fcd6889fb13858e3f78e9d5e35ffd80d8e0accb https://github.com/bluez/bluez/commit/7fcd6889fb13858e3f78e9d5e35ffd80d8e0accb Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2022-11-15 (Tue, 15 Nov 2022) Changed paths: M src/shared/bap.c Log Message: ----------- shared/bap: Fix crash when canceling requests If bt_bap_unref/bap_free is called while there is an ongoing pending request it may endup calling into bap_notify_ready which will try to notify ready callbacks while holding a reference, but in case the reference is already 0 that means it would switch to 1 and back 0 causing a double free. To prevent that bap_notify_ready now checks that the reference is not 0 with use of bt_bap_ref_safe. Commit: 1ebbfee345171cb4d38ae55501849a5671d2df4a https://github.com/bluez/bluez/commit/1ebbfee345171cb4d38ae55501849a5671d2df4a Author: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Date: 2022-11-15 (Tue, 15 Nov 2022) Changed paths: M Makefile.am A unit/test-bap.c Log Message: ----------- unit: Introduce test-bap Test Summary ------------ BAP/UCL/DISC/BV-01-C Passed BAP/UCL/DISC/BV-02-C Passed BAP/UCL/DISC/BV-06-C Passed BAP/UCL/DISC/BV-05-C Passed BAP/UCL/DISC/BV-03-C Passed BAP/UCL/DISC/BV-04-C Passed Total: 6, Passed: 6 (100.0%), Failed: 0, Not Run: 0 Commit: e515f4b6e25c971c47ab79e9cbdfa17119bbde23 https://github.com/bluez/bluez/commit/e515f4b6e25c971c47ab79e9cbdfa17119bbde23 Author: Bastien Nocera <hadess@xxxxxxxxxx> Date: 2022-11-16 (Wed, 16 Nov 2022) Changed paths: M plugins/hostname.c Log Message: ----------- hostname: Add '' around printed strings Otherwise we can't see whether the string is nul, or empty. Commit: e2b2b1675f310023862319ea10ffd205a75cc0cb https://github.com/bluez/bluez/commit/e2b2b1675f310023862319ea10ffd205a75cc0cb Author: Bastien Nocera <hadess@xxxxxxxxxx> Date: 2022-11-16 (Wed, 16 Nov 2022) Changed paths: M plugins/hostname.c Log Message: ----------- hostname: Fallback to transient hostname After pretty hostname, and static hostname, also support transient hostname as a last resort before 'BlueZ X.XX'. This happens on Fedora's Workstation installation as it calls "hostnamectl set-hostname" on startup. In Fedora Silverblue, the default hostname is set as fedora in /etc/os-release. In both cases, we should fall back to that transient hostname, as bad as it could be. Note that the transient hostname needs to be monitored through the kernel directly, as explained in: https://www.freedesktop.org/software/systemd/man/org.freedesktop.hostname1.html Compare: https://github.com/bluez/bluez/compare/f65b4d5fc77f...e2b2b1675f31
