https://bugzilla.kernel.org/show_bug.cgi?id=60824 --- Comment #250 from justanormaltinkerermihir@xxxxxxxx --- It seems that my terminal failed to copy the last line of the commands correctly so here it fixed: < HCI Command: Read Local Version In.. (0x04|0x0001) plen 0 #1 [hci0] 9.448239 > HCI Event: Command Complete (0x0e) plen 12 #2 [hci0] 9.450137 Read Local Version Information (0x04|0x0001) ncmd 1 Status: Success (0x00) HCI version: Bluetooth 5.0 (0x09) - Revision 2064 (0x0810) LMP version: Bluetooth 5.0 (0x09) - Subversion 8978 (0x2312) Manufacturer: Cambridge Silicon Radio (10) < HCI Command: Read Local Support.. (0x04|0x0002) plen 0 #127 [hci0] 10.188575 > HCI Event: Command Complete (0x0e) plen 68 #128 [hci0] 10.194513 Read Local Supported Commands (0x04|0x0002) ncmd 1 Status: Success (0x00) Commands: 163 entries Inquiry (Octet 0 - Bit 0) Inquiry Cancel (Octet 0 - Bit 1) Periodic Inquiry Mode (Octet 0 - Bit 2) Exit Periodic Inquiry Mode (Octet 0 - Bit 3) Create Connection (Octet 0 - Bit 4) Disconnect (Octet 0 - Bit 5) Create Connection Cancel (Octet 0 - Bit 7) Accept Connection Request (Octet 1 - Bit 0) Reject Connection Request (Octet 1 - Bit 1) Link Key Request Reply (Octet 1 - Bit 2) Link Key Request Negative Reply (Octet 1 - Bit 3) PIN Code Request Reply (Octet 1 - Bit 4) PIN Code Request Negative Reply (Octet 1 - Bit 5) Change Connection Packet Type (Octet 1 - Bit 6) Authentication Requested (Octet 1 - Bit 7) Set Connection Encryption (Octet 2 - Bit 0) Change Connection Link Key (Octet 2 - Bit 1) Temporary Link Key (Octet 2 - Bit 2) Remote Name Request (Octet 2 - Bit 3) Remote Name Request Cancel (Octet 2 - Bit 4) Read Remote Supported Features (Octet 2 - Bit 5) Read Remote Extended Features (Octet 2 - Bit 6) Read Remote Version Information (Octet 2 - Bit 7) Read Clock Offset (Octet 3 - Bit 0) Read LMP Handle (Octet 3 - Bit 1) Hold Mode (Octet 4 - Bit 1) Sniff Mode (Octet 4 - Bit 2) Exit Sniff Mode (Octet 4 - Bit 3) Park State (Octet 4 - Bit 4) Exit Park State (Octet 4 - Bit 5) QoS Setup (Octet 4 - Bit 6) Role Discovery (Octet 4 - Bit 7) Switch Role (Octet 5 - Bit 0) Read Link Policy Settings (Octet 5 - Bit 1) Write Link Policy Settings (Octet 5 - Bit 2) Read Default Link Policy Settings (Octet 5 - Bit 3) Write Default Link Policy Settings (Octet 5 - Bit 4) Flow Specification (Octet 5 - Bit 5) Set Event Mask (Octet 5 - Bit 6) Reset (Octet 5 - Bit 7) Set Event Filter (Octet 6 - Bit 0) Flush (Octet 6 - Bit 1) Read PIN Type (Octet 6 - Bit 2) Write PIN Type (Octet 6 - Bit 3) Create New Unit Key (Octet 6 - Bit 4) Read Stored Link Key (Octet 6 - Bit 5) Write Stored Link Key (Octet 6 - Bit 6) Delete Stored Link Key (Octet 6 - Bit 7) Write Local Name (Octet 7 - Bit 0) Read Local Name (Octet 7 - Bit 1) Read Connection Accept Timeout (Octet 7 - Bit 2) Write Connection Accept Timeout (Octet 7 - Bit 3) Read Page Timeout (Octet 7 - Bit 4) Write Page Timeout (Octet 7 - Bit 5) Read Scan Enable (Octet 7 - Bit 6) Write Scan Enable (Octet 7 - Bit 7) Read Page Scan Activity (Octet 8 - Bit 0) Write Page Scan Activity (Octet 8 - Bit 1) Read Inquiry Scan Activity (Octet 8 - Bit 2) Write Inquiry Scan Activity (Octet 8 - Bit 3) Read Class of Device (Octet 9 - Bit 0) Write Class of Device (Octet 9 - Bit 1) Read Voice Setting (Octet 9 - Bit 2) Write Voice Setting (Octet 9 - Bit 3) Read Automatic Flush Timeout (Octet 9 - Bit 4) Write Automatic Flush Timeout (Octet 9 - Bit 5) Read Num Broadcast Retransmissions (Octet 9 - Bit 6) Write Num Broadcast Retransmissions (Octet 9 - Bit 7) Read Hold Mode Activity (Octet 10 - Bit 0) Write Hold Mode Activity (Octet 10 - Bit 1) Read Transmit Power Level (Octet 10 - Bit 2) Read Sync Flow Control Enable (Octet 10 - Bit 3) Write Sync Flow Control Enable (Octet 10 - Bit 4) Set Controller To Host Flow Control (Octet 10 - Bit 5) Host Buffer Size (Octet 10 - Bit 6) Host Number of Completed Packets (Octet 10 - Bit 7) Read Link Supervision Timeout (Octet 11 - Bit 0) Write Link Supervision Timeout (Octet 11 - Bit 1) Read Number of Supported IAC (Octet 11 - Bit 2) Read Current IAC LAP (Octet 11 - Bit 3) Write Current IAC LAP (Octet 11 - Bit 4) Set AFH Host Channel Classification (Octet 12 - Bit 1) Read Inquiry Scan Type (Octet 12 - Bit 4) Write Inquiry Scan Type (Octet 12 - Bit 5) Read Inquiry Mode (Octet 12 - Bit 6) Write Inquiry Mode (Octet 12 - Bit 7) Read Page Scan Type (Octet 13 - Bit 0) Write Page Scan Type (Octet 13 - Bit 1) Read AFH Channel Assessment Mode (Octet 13 - Bit 2) Write AFH Channel Assessment Mode (Octet 13 - Bit 3) Read Local Version Information (Octet 14 - Bit 3) Read Local Supported Features (Octet 14 - Bit 5) Read Local Extended Features (Octet 14 - Bit 6) Read Buffer Size (Octet 14 - Bit 7) Read BD ADDR (Octet 15 - Bit 1) Read Failed Contact Counter (Octet 15 - Bit 2) Reset Failed Contact Counter (Octet 15 - Bit 3) Read Link Quality (Octet 15 - Bit 4) Read RSSI (Octet 15 - Bit 5) Read AFH Channel Map (Octet 15 - Bit 6) Read Clock (Octet 15 - Bit 7) Read Loopback Mode (Octet 16 - Bit 0) Write Loopback Mode (Octet 16 - Bit 1) Enable Device Under Test Mode (Octet 16 - Bit 2) Setup Synchronous Connection (Octet 16 - Bit 3) Accept Synchronous Connection Request (Octet 16 - Bit 4) Reject Synchronous Connection Request (Octet 16 - Bit 5) Read Extended Inquiry Response (Octet 17 - Bit 0) Write Extended Inquiry Response (Octet 17 - Bit 1) Refresh Encryption Key (Octet 17 - Bit 2) Sniff Subrating (Octet 17 - Bit 4) Read Simple Pairing Mode (Octet 17 - Bit 5) Write Simple Pairing Mode (Octet 17 - Bit 6) Read Local OOB Data (Octet 17 - Bit 7) Read Inquiry Response TX Power Level (Octet 18 - Bit 0) Write Inquiry Transmit Power Level (Octet 18 - Bit 1) Read Default Erroneous Data Reporting (Octet 18 - Bit 2) Write Default Erroneous Data Reporting (Octet 18 - Bit 3) IO Capability Request Reply (Octet 18 - Bit 7) User Confirmation Request Reply (Octet 19 - Bit 0) User Confirmation Request Neg Reply (Octet 19 - Bit 1) User Passkey Request Reply (Octet 19 - Bit 2) User Passkey Request Negative Reply (Octet 19 - Bit 3) Remote OOB Data Request Reply (Octet 19 - Bit 4) Write Simple Pairing Debug Mode (Octet 19 - Bit 5) Enhanced Flush (Octet 19 - Bit 6) Remote OOB Data Request Neg Reply (Octet 19 - Bit 7) Send Keypress Notification (Octet 20 - Bit 2) IO Capability Request Negative Reply (Octet 20 - Bit 3) Read Encryption Key Size (Octet 20 - Bit 4) Read Enhanced Transmit Power Level (Octet 24 - Bit 0) Read LE Host Supported (Octet 24 - Bit 5) Write LE Host Supported (Octet 24 - Bit 6) LE Set Event Mask (Octet 25 - Bit 0) LE Read Buffer Size (Octet 25 - Bit 1) LE Read Local Supported Features (Octet 25 - Bit 2) LE Set Random Address (Octet 25 - Bit 4) LE Set Advertising Parameters (Octet 25 - Bit 5) LE Read Advertising Channel TX Power (Octet 25 - Bit 6) LE Set Advertising Data (Octet 25 - Bit 7) LE Set Scan Response Data (Octet 26 - Bit 0) LE Set Advertise Enable (Octet 26 - Bit 1) LE Set Scan Parameters (Octet 26 - Bit 2) LE Set Scan Enable (Octet 26 - Bit 3) LE Create Connection (Octet 26 - Bit 4) LE Create Connection Cancel (Octet 26 - Bit 5) LE Read Accept List Size (Octet 26 - Bit 6) LE Clear Accept List (Octet 26 - Bit 7) LE Add Device To Accept List (Octet 27 - Bit 0) LE Remove Device From Accept List (Octet 27 - Bit 1) LE Connection Update (Octet 27 - Bit 2) LE Set Host Channel Classification (Octet 27 - Bit 3) LE Read Channel Map (Octet 27 - Bit 4) LE Read Remote Used Features (Octet 27 - Bit 5) LE Encrypt (Octet 27 - Bit 6) LE Rand (Octet 27 - Bit 7) LE Start Encryption (Octet 28 - Bit 0) LE Long Term Key Request Reply (Octet 28 - Bit 1) LE Long Term Key Request Neg Reply (Octet 28 - Bit 2) LE Read Supported States (Octet 28 - Bit 3) LE Receiver Test (Octet 28 - Bit 4) LE Transmitter Test (Octet 28 - Bit 5) LE Test End (Octet 28 - Bit 6) < HCI Command: Read Local Support.. (0x04|0x0003) plen 0 #121 [hci0] 10.182585 > HCI Event: Command Complete (0x0e) plen 12 #122 [hci0] 10.184514 Read Local Supported Features (0x04|0x0003) ncmd 1 Status: Success (0x00) Features: 0xbf 0x3e 0x4d 0xfa 0xdb 0x3d 0x7b 0xc7 3 slot packets 5 slot packets Encryption Slot offset Timing accuracy Role switch Sniff mode Power control requests Channel quality driven data rate (CQDDR) SCO link HV2 packets HV3 packets CVSD synchronous data Power control Transparent synchronous data Flow control lag (most significant bit) Enhanced Data Rate ACL 2 Mbps mode Enhanced inquiry scan Interlaced inquiry scan Interlaced page scan RSSI with inquiry results Extended SCO link (EV3 packets) EV4 packets EV5 packets AFH capable peripheral AFH classification peripheral LE Supported (Controller) 3-slot Enhanced Data Rate ACL packets 5-slot Enhanced Data Rate ACL packets Pause encryption AFH capable central AFH classification central Enhanced Data Rate eSCO 2 Mbps mode Extended Inquiry Response Simultaneous LE and BR/EDR (Controller) Secure Simple Pairing Encapsulated PDU Erroneous Data Reporting Non-flushable Packet Boundary Flag Link Supervision Timeout Changed Event Inquiry TX Power Level Enhanced Power Control Extended features Unknown features (0x4000000000000000) -- You may reply to this email to add a comment. You are receiving this mail because: You are the assignee for the bug.
