Re: [PATCH] Bluetooth: btusb: Introduce generic USB reset

[Paul Menzel <pmenzel@xxxxxxxxxxxxx>]

Dear Archie,


Thank you for the patch.

Am 04.10.22 um 10:32 schrieb Archie Pusaka:
> From: Archie Pusaka <apusaka@xxxxxxxxxxxx>
>
> On cmd_timeout and there is no reset_gpio, reset the USB port as a

Maybe:

s/there is no/with no/g

> last resort.

Can you please document your test setup, and also mention that you 
change the behavior of:

1.  btusb_intel_cmd_timeout
2.  btusb_rtl_cmd_timeout

[…]


Kind regards,

Paul


> Signed-off-by: Archie Pusaka <apusaka@xxxxxxxxxxxx>
> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@xxxxxxxxxx>
> Reviewed-by: Ying Hsu <yinghsu@xxxxxxxxxxxx>
>
> ---
>
>   drivers/bluetooth/btusb.c | 26 ++++++++++++++++----------
>   1 file changed, 16 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index 271963805a38..11040124ef79 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -696,6 +696,19 @@ struct btusb_data {
>   	unsigned cmd_timeout_cnt;
>   };
>   
> +static void generic_usb_reset(struct hci_dev *hdev, struct btusb_data *data)
> +{
> +	int err;
> +
> +	bt_dev_err(hdev, "Resetting usb device.");
> +	/* This is not an unbalanced PM reference since the device will reset */
> +	err = usb_autopm_get_interface(data->intf);
> +	if (!err)
> +		usb_queue_reset_device(data->intf);
> +	else
> +		bt_dev_err(hdev, "Failed usb_autopm_get_interface: %d", err);
> +}
> +
>   static void btusb_intel_cmd_timeout(struct hci_dev *hdev)
>   {
>   	struct btusb_data *data = hci_get_drvdata(hdev);
> @@ -705,7 +718,7 @@ static void btusb_intel_cmd_timeout(struct hci_dev *hdev)
>   		return;
>   
>   	if (!reset_gpio) {
> -		bt_dev_err(hdev, "No way to reset. Ignoring and continuing");
> +		generic_usb_reset(hdev, data);
>   		return;
>   	}
>   
> @@ -736,7 +749,7 @@ static void btusb_rtl_cmd_timeout(struct hci_dev *hdev)
>   		return;
>   
>   	if (!reset_gpio) {
> -		bt_dev_err(hdev, "No gpio to reset Realtek device, ignoring");
> +		generic_usb_reset(hdev, data);
>   		return;
>   	}
>   
> @@ -761,7 +774,6 @@ static void btusb_qca_cmd_timeout(struct hci_dev *hdev)
>   {
>   	struct btusb_data *data = hci_get_drvdata(hdev);
>   	struct gpio_desc *reset_gpio = data->reset_gpio;
> -	int err;
>   
>   	if (++data->cmd_timeout_cnt < 5)
>   		return;
> @@ -787,13 +799,7 @@ static void btusb_qca_cmd_timeout(struct hci_dev *hdev)
>   		return;
>   	}
>   
> -	bt_dev_err(hdev, "Multiple cmd timeouts seen. Resetting usb device.");
> -	/* This is not an unbalanced PM reference since the device will reset */
> -	err = usb_autopm_get_interface(data->intf);
> -	if (!err)
> -		usb_queue_reset_device(data->intf);
> -	else
> -		bt_dev_err(hdev, "Failed usb_autopm_get_interface with %d", err);
> +	generic_usb_reset(hdev, data);
>   }
>   
>   static inline void btusb_free_frags(struct btusb_data *data)