Re: [PATCH] Bluetooth: Add new PID for Atheros 3011

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,

Am 26.11.2010 13:10, schrieb Bala Shanmugam:
Marcel Holtmann wrote:
Hi Bala,

Atheros 3011 has small sflash firmware and needs to be
blacklisted in transport driver to load actual firmware
in DFU driver.

please add an empty line here. The signed-off line should always be
separated from the commit message. The git am takes it literal as it is
and does not modify it.

Signed-off-by: Bala Shanmugam <sbalashanmugam@xxxxxxxxxxx>
---
drivers/bluetooth/ath3k.c | 2 ++
drivers/bluetooth/btusb.c | 3 +++
2 files changed, 5 insertions(+), 0 deletions(-)

diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index 128cae4..c70fb0b 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -35,6 +35,8 @@
static struct usb_device_id ath3k_table[] = {
/* Atheros AR3011 */
{ USB_DEVICE(0x0CF3, 0x3000) },

For the sake of readability add another empty line here as well.

+ /* Atheros AR3011 with sflash firmware*/
+ { USB_DEVICE(0x0CF3, 0x3002) },

I don't understand this patch and starting bluetooth will fail here, when that patch is applied (to 2.6.36.1):

-----------
[ 118.395793] usb 1-1.3: new full speed USB device using orion-ehci and address 4 [ 118.506262] usb 1-1.3: New USB device found, idVendor=0cf3, idProduct=3000 [ 118.506280] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[  118.654973] Bluetooth: Atheros AR30xx firmware driver ver 1.0
[  119.072139] usbcore: registered new interface driver ath3k
[  119.184499] usb 1-1.3: USB disconnect, address 4
[ 120.695642] usb 1-1.3: new full speed USB device using orion-ehci and address 5 [ 120.806394] usb 1-1.3: New USB device found, idVendor=0cf3, idProduct=3002 [ 120.806410] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 125.815007] ath3k_load_firmware: Can't change to loading configuration err
[  125.815096] ath3k: probe of 1-1.3:1.0 failed with error -5
-----------

As I've understood it, the pid 0x3002 will only come up, when the firmwire was already uploaded. So adding 0x3002 to ath3k seems to be wrong.

Regards,

Alexander
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Bluez Devel]     [Linux Wireless Networking]     [Linux Wireless Personal Area Networking]     [Linux ATH6KL]     [Linux USB Devel]     [Linux Media Drivers]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Big List of Linux Books]

  Powered by Linux