Hi,
On Tuesday 05 October 2010 08:13:59 you wrote:
> > I put the output ot "cat /proc/bus/usb/devices" in the attachment, I am
> > pretty sure the setup of my software is OK, because now I can use my
> > bluetooth headset with an dongle, but it does not work for the internal
> > chip.
>
> maybe that hardware has some limitations that are unclear to me. Can you
> run hcidump -X -V and give us the output when trying to establish a SCO
> connection.
Here is the output of hcidump. This issue might be related to the usb code,
when I test the dongle, it gives the same error when I connect it through a
usb3 port, it only works with usb2 port, but for the internal broadcom chip,
nothing changes even when I remove the xhci_hcd module.
--
Best Regards,
LR
HCI sniffer - Bluetooth packet analyzer ver 1.42
device: hci0 snap_len: 1028 filter: 0xffffffffffffffff
> HCI Event: Connect Request (0x04) plen 10
bdaddr 00:19:7F:D8:6A:C3 class 0x200404 type ACL
< HCI Command: Accept Connection Request (0x01|0x0009) plen 7
bdaddr 00:19:7F:D8:6A:C3 role 0x00
Role: Master
> HCI Event: Command Status (0x0f) plen 4
Accept Connection Request (0x01|0x0009) status 0x00 ncmd 1
> HCI Event: Role Change (0x12) plen 8
status 0x00 bdaddr 00:19:7F:D8:6A:C3 role 0x00
Role: Master
> HCI Event: Link Key Request (0x17) plen 6
bdaddr 00:19:7F:D8:6A:C3
< HCI Command: Link Key Request Reply (0x01|0x000b) plen 22
bdaddr 00:19:7F:D8:6A:C3 key 9741E3A1976D406A2667C8926C02BDBE
> HCI Event: Command Complete (0x0e) plen 10
Link Key Request Reply (0x01|0x000b) ncmd 1
status 0x00 bdaddr 00:19:7F:D8:6A:C3
> HCI Event: Connect Complete (0x03) plen 11
status 0x00 handle 11 bdaddr 00:19:7F:D8:6A:C3 type ACL encrypt 0x01
< HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
handle 11
> HCI Event: Command Status (0x0f) plen 4
Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 1
> HCI Event: Read Remote Supported Features (0x0b) plen 11
status 0x00 handle 11
Features: 0xbc 0xe8 0x01 0x00 0x08 0x08 0x00 0x00
> ACL data: handle 11 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x0040
< ACL data: handle 11 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 1 status 0
Connection pending - No futher information available
< ACL data: handle 11 flags 0x02 dlen 10
L2CAP(s): Info req: type 2
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 11 packets 2
> ACL data: handle 11 flags 0x02 dlen 16
L2CAP(s): Info rsp: type 2 result 0
Extended feature mask 0x0000
< ACL data: handle 11 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0
Connection successful
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
bdaddr 00:19:7F:D8:6A:C3 mode 2 clkoffset 0x0000
> HCI Event: Command Status (0x0f) plen 4
Remote Name Request (0x01|0x0019) status 0x00 ncmd 1
> ACL data: handle 11 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 48
< ACL data: handle 11 flags 0x02 dlen 18
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 4
MTU 48
< ACL data: handle 11 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 0
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 11 packets 2
> ACL data: handle 11 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
Success
> HCI Event: Remote Name Req Complete (0x07) plen 255
status 0x00 bdaddr 00:19:7F:D8:6A:C3 name 'ATT V521'
> ACL data: handle 11 flags 0x02 dlen 19
L2CAP(d): cid 0x0040 len 15 [psm 1]
SDP SS Req: tid 0x1 len 0xa
pat uuid-32 0x111f (Handsfree AG)
max 40
cont 00
< ACL data: handle 11 flags 0x02 dlen 18
L2CAP(d): cid 0x0040 len 14 [psm 1]
SDP SS Rsp: tid 0x1 len 0x9
count 1
handle 0x10001
cont 00
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 11 packets 2
> ACL data: handle 11 flags 0x02 dlen 21
L2CAP(d): cid 0x0040 len 17 [psm 1]
SDP SA Req: tid 0x2 len 0xc
handle 0x10001
max 38
aid(s) 0x0004 (ProtocolDescList)
cont 00
< ACL data: handle 11 flags 0x02 dlen 31
L2CAP(d): cid 0x0040 len 27 [psm 1]
SDP SA Rsp: tid 0x2 len 0x16
count 19
aid 0x0004 (ProtocolDescList)
< < uuid-16 0x0100 (L2CAP) > <
uuid-16 0x0003 (RFCOMM) uint 0xd > >
cont 00
> ACL data: handle 11 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 3 scid 0x0041
< ACL data: handle 11 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0041 scid 0x0041 result 0 status 0
Connection successful
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 11 packets 2
> ACL data: handle 11 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0041 flags 0x00 clen 4
MTU 132
< ACL data: handle 11 flags 0x02 dlen 18
L2CAP(s): Config rsp: scid 0x0041 flags 0x00 result 0 clen 4
MTU 132
< ACL data: handle 11 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0041 flags 0x00 clen 4
MTU 1013
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 11 packets 2
> ACL data: handle 11 flags 0x02 dlen 18
L2CAP(s): Config rsp: scid 0x0041 flags 0x00 result 0 clen 4
MTU 1013
> ACL data: handle 11 flags 0x02 dlen 8
L2CAP(d): cid 0x0041 len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c
< ACL data: handle 11 flags 0x02 dlen 8
L2CAP(d): cid 0x0041 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
> ACL data: handle 11 flags 0x02 dlen 18
L2CAP(d): cid 0x0041 len 14 [psm 3]
RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8
dlci 26 frame_type 0 credit_flow 15 pri 0 ack_timer 0
frame_size 126 max_retrans 0 credits 0
< ACL data: handle 11 flags 0x02 dlen 18
L2CAP(d): cid 0x0041 len 14 [psm 3]
RFCOMM(s): PN RSP: cr 0 dlci 0 pf 0 ilen 10 fcs 0xaa mcc_len 8
dlci 26 frame_type 0 credit_flow 14 pri 0 ack_timer 0
frame_size 126 max_retrans 0 credits 7
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 11 packets 2
> ACL data: handle 11 flags 0x02 dlen 8
L2CAP(d): cid 0x0041 len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 26 pf 1 ilen 0 fcs 0xe7
< HCI Command: Authentication Requested (0x01|0x0011) plen 2
handle 11
> HCI Event: Command Status (0x0f) plen 4
Authentication Requested (0x01|0x0011) status 0x00 ncmd 1
> HCI Event: Link Key Request (0x17) plen 6
bdaddr 00:19:7F:D8:6A:C3
< HCI Command: Link Key Request Reply (0x01|0x000b) plen 22
bdaddr 00:19:7F:D8:6A:C3 key 9741E3A1976D406A2667C8926C02BDBE
> HCI Event: Command Complete (0x0e) plen 10
Link Key Request Reply (0x01|0x000b) ncmd 1
status 0x00 bdaddr 00:19:7F:D8:6A:C3
> HCI Event: Auth Complete (0x06) plen 3
status 0x00 handle 11
< HCI Command: Set Connection Encryption (0x01|0x0013) plen 3
handle 11 encrypt 0x01
> HCI Event: Command Status (0x0f) plen 4
Set Connection Encryption (0x01|0x0013) status 0x00 ncmd 1
> HCI Event: Encrypt Change (0x08) plen 4
status 0x00 handle 11 encrypt 0x01
< ACL data: handle 11 flags 0x02 dlen 8
L2CAP(d): cid 0x0041 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 26 pf 1 ilen 0 fcs 0x2c
< ACL data: handle 11 flags 0x02 dlen 12
L2CAP(d): cid 0x0041 len 8 [psm 3]
RFCOMM(s): MSC CMD: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
dlci 26 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 0 b3 0 len 9
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 11 packets 2
> ACL data: handle 11 flags 0x02 dlen 12
L2CAP(d): cid 0x0041 len 8 [psm 3]
RFCOMM(s): MSC RSP: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
dlci 26 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 0 b3 0 len 9
> ACL data: handle 11 flags 0x02 dlen 12
L2CAP(d): cid 0x0041 len 8 [psm 3]
RFCOMM(s): MSC CMD: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
dlci 26 fc 0 rtc 1 rtr 1 ic 0 dv 0 b1 1 b2 0 b3 0 len 9
< ACL data: handle 11 flags 0x02 dlen 12
L2CAP(d): cid 0x0041 len 8 [psm 3]
RFCOMM(s): MSC RSP: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
dlci 26 fc 0 rtc 1 rtr 1 ic 0 dv 0 b1 1 b2 0 b3 0 len 9
< ACL data: handle 11 flags 0x02 dlen 9
L2CAP(d): cid 0x0041 len 5 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 26 pf 1 ilen 0 fcs 0x22 credits 33
> ACL data: handle 11 flags 0x02 dlen 9
L2CAP(d): cid 0x0041 len 5 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 26 pf 1 ilen 0 fcs 0xf8 credits 15
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 11 packets 2
> ACL data: handle 11 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040
< ACL data: handle 11 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 11 packets 1
> ACL data: handle 11 flags 0x02 dlen 19
L2CAP(d): cid 0x0041 len 15 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 26 pf 0 ilen 11 fcs 0xe4
0000: 41 54 2b 42 52 53 46 3d 32 34 0d AT+BRSF=24.
< ACL data: handle 11 flags 0x02 dlen 22
L2CAP(d): cid 0x0041 len 18 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 26 pf 0 ilen 14 fcs 0x3e
0000: 0d 0a 2b 42 52 53 46 3a 20 33 35 32 0d 0a ..+BRSF: 352..
< ACL data: handle 11 flags 0x02 dlen 14
L2CAP(d): cid 0x0041 len 10 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 26 pf 0 ilen 6 fcs 0x3e
0000: 0d 0a 4f 4b 0d 0a ..OK..
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 11 packets 2
> ACL data: handle 11 flags 0x02 dlen 19
L2CAP(d): cid 0x0041 len 15 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 26 pf 1 ilen 10 fcs 0xf8 credits 2
0000: 41 54 2b 43 49 4e 44 3d 3f 0d AT+CIND=?.
< ACL data: handle 11 flags 0x02 dlen 134
L2CAP(d): cid 0x0041 len 130 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 26 pf 0 ilen 126 fcs 0x3e
0000: 0d 0a 2b 43 49 4e 44 3a 20 28 22 62 61 74 74 63 ..+CIND: ("battc
0010: 68 67 22 2c 28 30 2d 35 29 29 2c 28 22 73 69 67 hg",(0-5)),("sig
0020: 6e 61 6c 22 2c 28 30 2d 35 29 29 2c 28 22 73 65 nal",(0-5)),("se
0030: 72 76 69 63 65 22 2c 28 30 2c 31 29 29 2c 28 22 rvice",(0,1)),("
0040: 63 61 6c 6c 22 2c 28 30 2c 31 29 29 2c 28 22 63 call",(0,1)),("c
0050: 61 6c 6c 73 65 74 75 70 22 2c 28 30 2d 33 29 29 allsetup",(0-3))
0060: 2c 28 22 63 61 6c 6c 68 65 6c 64 22 2c 28 30 2d ,("callheld",(0-
0070: 32 29 29 2c 28 22 72 6f 61 6d 22 2c 28 30 2)),("roam",(0
< ACL data: handle 11 flags 0x02 dlen 14
L2CAP(d): cid 0x0041 len 10 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 26 pf 0 ilen 6 fcs 0x3e
0000: 2c 31 29 29 0d 0a ,1))..
< ACL data: handle 11 flags 0x02 dlen 14
L2CAP(d): cid 0x0041 len 10 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 26 pf 0 ilen 6 fcs 0x3e
0000: 0d 0a 4f 4b 0d 0a ..OK..
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 11 packets 2
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 11 packets 1
> ACL data: handle 11 flags 0x02 dlen 18
L2CAP(d): cid 0x0041 len 14 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 26 pf 1 ilen 9 fcs 0xf8 credits 2
0000: 41 54 2b 43 49 4e 44 3f 0d AT+CIND?.
< ACL data: handle 11 flags 0x02 dlen 32
L2CAP(d): cid 0x0041 len 28 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 26 pf 0 ilen 24 fcs 0x3e
0000: 0d 0a 2b 43 49 4e 44 3a 20 35 2c 35 2c 31 2c 30 ..+CIND: 5,5,1,0
0010: 2c 30 2c 30 2c 30 0d 0a ,0,0,0..
< ACL data: handle 11 flags 0x02 dlen 14
L2CAP(d): cid 0x0041 len 10 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 26 pf 0 ilen 6 fcs 0x3e
0000: 0d 0a 4f 4b 0d 0a ..OK..
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 11 packets 2
> ACL data: handle 11 flags 0x02 dlen 27
> ACL data: handle 11 flags 0x01 dlen 1
L2CAP(d): cid 0x0041 len 24 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 26 pf 1 ilen 19 fcs 0xf8 credits 2
0000: 41 54 2b 43 4d 45 52 3d 33 2c 20 30 2c 20 30 2c AT+CMER=3, 0, 0,
0010: 20 31 0d 1.
< ACL data: handle 11 flags 0x02 dlen 14
L2CAP(d): cid 0x0041 len 10 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 26 pf 0 ilen 6 fcs 0x3e
0000: 0d 0a 4f 4b 0d 0a ..OK..
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 11 packets 1
> ACL data: handle 11 flags 0x02 dlen 19
L2CAP(d): cid 0x0041 len 15 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 26 pf 1 ilen 10 fcs 0xf8 credits 2
0000: 41 54 2b 56 47 53 3d 31 35 0d AT+VGS=15.
< ACL data: handle 11 flags 0x02 dlen 14
L2CAP(d): cid 0x0041 len 10 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 26 pf 0 ilen 6 fcs 0x3e
0000: 0d 0a 4f 4b 0d 0a ..OK..
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 11 packets 1
> HCI Event: Encrypt Change (0x08) plen 4
status 0x00 handle 11 encrypt 0x00
> HCI Event: Role Change (0x12) plen 8
status 0x00 bdaddr 00:19:7F:D8:6A:C3 role 0x01
Role: Slave
> HCI Event: Encrypt Change (0x08) plen 4
status 0x00 handle 11 encrypt 0x01
< HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17
handle 11 voice setting 0x0060
> HCI Event: Command Status (0x0f) plen 4
Setup Synchronous Connection (0x01|0x0028) status 0x00 ncmd 1
> HCI Event: Synchronous Connect Complete (0x2c) plen 17
status 0x00 handle 1 bdaddr 00:19:7F:D8:6A:C3 type SCO
Air mode: CVSD
< ACL data: handle 11 flags 0x02 dlen 19
L2CAP(d): cid 0x0041 len 15 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 26 pf 0 ilen 11 fcs 0x3e
0000: 0d 0a 2b 56 47 53 3d 31 35 0d 0a ..+VGS=15..
< ACL data: handle 11 flags 0x02 dlen 18
L2CAP(d): cid 0x0041 len 14 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 26 pf 0 ilen 10 fcs 0x3e
0000: 0d 0a 2b 56 47 4d 3d 30 0d 0a ..+VGM=0..
< SCO data: handle 1 flags 0x00 dlen 48
0000: 07 00 fb ff 04 00 fa ff 01 00 fb ff 04 00 fb ff ................
0010: 02 00 fb ff 05 00 fa ff 03 00 fd ff 02 00 fc ff ................
0020: 03 00 fb ff 05 00 fa ff 05 00 fa ff 06 00 fa ff ................
< SCO data: handle 1 flags 0x00 dlen 48
0000: 04 00 fc ff 05 00 f9 ff 07 00 fb ff 05 00 fc ff ................
0010: 05 00 fc ff 07 00 f7 ff 08 00 fd ff 06 00 fb ff ................
0020: 07 00 f8 ff 07 00 f9 ff 09 00 f8 ff 07 00 fa ff ................
< SCO data: handle 1 flags 0x00 dlen 48
0000: 09 00 f9 ff 06 00 f6 ff 0b 00 fa ff 07 00 f6 ff ................
0010: 09 00 f4 ff 07 00 f7 ff 0b 00 f4 ff 0b 00 f5 ff ................
0020: 0a 00 f1 ff 0e 00 f4 ff 0f 00 f6 ff 11 00 f2 ff ................
< SCO data: handle 1 flags 0x00 dlen 48
0000: 13 00 f1 ff 17 00 eb ff 1e 00 eb ff 25 00 d9 ff ............%...
0010: 52 00 b4 00 1e 01 43 00 a8 ff 1d fe 53 01 76 ff R.....C.....S.v.
0020: 37 fe e4 00 a7 fd bb 00 4e ff 4a 01 8b ff 93 01 7.......N.J.....
< SCO data: handle 1 flags 0x00 dlen 48
0000: fa fc 73 ff 04 05 cd 00 27 fc 25 ff 03 01 d9 00 ..s.....'.%.....
0010: cb 03 c0 00 1b fe 83 ff 5b ff d4 fc 12 03 53 fe ........[.....S.
0020: 30 fd c9 fd 40 04 d0 01 95 02 e0 fa 53 00 63 04 0...@.......S.c.
< SCO data: handle 1 flags 0x00 dlen 48
0000: 81 d5 87 d9 a4 de 31 e5 5a eb 2e f2 2d fa b5 01 ......1.Z...-...
0010: 68 08 b4 0f ae 16 01 1c c0 20 f3 24 16 27 a9 27 h........ .$.'.'
0020: 25 28 0f 27 0e 23 98 1e c1 19 14 13 83 0b 05 04 %(.'.#..........
< HCI Command: Disconnect (0x01|0x0006) plen 3
handle 1 reason 0x13
Reason: Remote User Terminated Connection
> HCI Event: Command Status (0x0f) plen 4
Disconnect (0x01|0x0006) status 0x00 ncmd 1
> HCI Event: Disconn Complete (0x05) plen 4
status 0x00 handle 1 reason 0x16
Reason: Connection Terminated by Local Host
