On 8/13/2010 10:33 AM, Matthew Wilson wrote:
> Configures device address from hciattach parameter.
> UART speed limited to 115200.
> Requires separate device specific firmware.
> ---
> Makefile.tools | 3 +-
> tools/hciattach.c | 8 ++
> tools/hciattach.h | 1 +
> tools/hciattach_qualcomm.c | 279 ++++++++++++++++++++++++++++++++++++++++++++
> 4 files changed, 290 insertions(+), 1 deletions(-)
> create mode 100644 tools/hciattach_qualcomm.c
>
> diff --git a/Makefile.tools b/Makefile.tools
> index 2dbf925..0ce7b75 100644
> --- a/Makefile.tools
> +++ b/Makefile.tools
> @@ -23,7 +23,8 @@ tools_l2ping_LDADD = lib/libbluetooth.la
> tools_hciattach_SOURCES = tools/hciattach.c tools/hciattach.h \
> tools/hciattach_st.c \
> tools/hciattach_ti.c \
> - tools/hciattach_tialt.c
> + tools/hciattach_tialt.c \
> + tools/hciattach_qualcomm.c
> tools_hciattach_LDADD = lib/libbluetooth.la
>
> tools_hciconfig_SOURCES = tools/hciconfig.c tools/csr.h tools/csr.c \
> diff --git a/tools/hciattach.c b/tools/hciattach.c
> index 81aea7b..4d4b0a1 100644
> --- a/tools/hciattach.c
> +++ b/tools/hciattach.c
> @@ -299,6 +299,11 @@ static int texasalt(int fd, struct uart_t *u, struct termios *ti)
> return texasalt_init(fd, u->speed, ti);
> }
>
> +static int qualcomm(int fd, struct uart_t *u, struct termios *ti)
> +{
> + return qualcomm_init(fd, u->speed, ti, u->bdaddr);
> +}
> +
> static int read_check(int fd, void *buf, int count)
> {
> int res;
> @@ -1073,6 +1078,9 @@ struct uart_t uart[] = {
> /* Broadcom BCM2035 */
> { "bcm2035", 0x0A5C, 0x2035, HCI_UART_H4, 115200, 460800, FLOW_CTL, NULL, bcm2035 },
>
> + /* QUALCOMM BTS */
> + { "qualcomm", 0x0000, 0x0000, HCI_UART_H4, 115200, 115200, FLOW_CTL, NULL, qualcomm },
> +
> { NULL, 0 }
> };
>
> diff --git a/tools/hciattach.h b/tools/hciattach.h
> index c0b80a1..3d5605b 100644
> --- a/tools/hciattach.h
> +++ b/tools/hciattach.h
> @@ -49,3 +49,4 @@ int texas_post(int fd, struct termios *ti);
> int texasalt_init(int fd, int speed, struct termios *ti);
> int stlc2500_init(int fd, bdaddr_t *bdaddr);
> int bgb2xx_init(int dd, bdaddr_t *bdaddr);
> +int qualcomm_init(int fd, int speed, struct termios *ti, const char *bdaddr);
> diff --git a/tools/hciattach_qualcomm.c b/tools/hciattach_qualcomm.c
> new file mode 100644
> index 0000000..31ca3c8
> --- /dev/null
> +++ b/tools/hciattach_qualcomm.c
> @@ -0,0 +1,279 @@
> +/*
> + *
> + * BlueZ - Bluetooth protocol stack for Linux
> + *
> + * Copyright (C) 2005-2010 Marcel Holtmann <marcel@xxxxxxxxxxxx>
> + * Copyright (c) 2010, Code Aurora Forum. All rights reserved.
> + *
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
> + *
> + */
> +
> +#ifdef HAVE_CONFIG_H
> +#include <config.h>
> +#endif
> +
> +#include <stdio.h>
> +#include <errno.h>
> +#include <fcntl.h>
> +#include <unistd.h>
> +#include <stdlib.h>
> +#include <string.h>
> +#include <signal.h>
> +#include <syslog.h>
> +#include <termios.h>
> +#include <time.h>
> +#include <sys/time.h>
> +#include <sys/poll.h>
> +#include <sys/param.h>
> +#include <sys/ioctl.h>
> +#include <sys/socket.h>
> +#include <sys/uio.h>
> +
> +#include <bluetooth/bluetooth.h>
> +#include <bluetooth/hci.h>
> +#include <bluetooth/hci_lib.h>
> +
> +#include "hciattach.h"
> +
> +#define FAILIF(x, args...) do { \
> + if (x) { \
> + fprintf(stderr, ##args); \
> + return -1; \
> + } \
> +} while(0)
> +
> +typedef struct {
> + uint8_t uart_prefix;
> + hci_event_hdr hci_hdr;
> + evt_cmd_complete cmd_complete;
> + uint8_t status;
> + uint8_t data[16];
> +} __attribute__((packed)) command_complete_t;
> +
> +
> +static int read_command_complete(int fd, unsigned short opcode, unsigned char len) {
> + command_complete_t resp;
> + unsigned char vsevent[512];
> + int n;
> +
> + /* Read reply. */
> + n = read_hci_event(fd, vsevent, sizeof(vsevent));
> + FAILIF(n < 0, "Failed to read response");
> +
> + FAILIF(vsevent[1] != 0xFF, "Failed to read response");
> +
> + n = read_hci_event(fd, (unsigned char *)&resp, sizeof(resp));
> + FAILIF(n < 0, "Failed to read response");
> +
> + FAILIF(resp.hci_hdr.evt != EVT_CMD_COMPLETE, /* event must be event-complete */
> + "Error in response: not a cmd-complete event, "
> + "but 0x%02x!\n", resp.hci_hdr.evt);
> +
> + FAILIF(resp.hci_hdr.plen < 4, /* plen >= 4 for EVT_CMD_COMPLETE */
> + "Error in response: plen is not >= 4, but 0x%02x!\n",
> + resp.hci_hdr.plen);
> +
> + /* cmd-complete event: opcode */
> + FAILIF(resp.cmd_complete.opcode != 0,
> + "Error in response: opcode is 0x%04x, not 0!",
> + resp.cmd_complete.opcode);
> +
> + return resp.status == 0 ? 0 : -1;
> +}
> +
> +static int qualcomm_load_firmware(int fd, const char *firmware, const char *bdaddr_s) {
> +
> + int fw = open(firmware, O_RDONLY);
> +
> + fprintf(stdout, "Opening firmware file: %s\n", firmware);
> +
> + FAILIF(fw < 0,
> + "Could not open firmware file %s: %s (%d).\n",
> + firmware, strerror(errno), errno);
> +
> + fprintf(stdout, "Uploading firmware...\n");
> + do {
> + /* Read each command and wait for a response. */
> + unsigned char data[1024];
> + unsigned char cmdp[1 + sizeof(hci_command_hdr)];
> + hci_command_hdr *cmd = (hci_command_hdr *)(cmdp + 1);
> + int nr;
> + nr = read(fw, cmdp, sizeof(cmdp));
> + if (!nr)
> + break;
> + FAILIF(nr != sizeof(cmdp), "Could not read H4 + HCI header!\n");
> + FAILIF(*cmdp != HCI_COMMAND_PKT, "Command is not an H4 command packet!\n");
> +
> + FAILIF(read(fw, data, cmd->plen) != cmd->plen,
> + "Could not read %d bytes of data for command with opcode %04x!\n",
> + cmd->plen,
> + cmd->opcode);
> +
> + if ((data[0] == 1) && (data[1] == 2) && (data[2] == 6)) {
> + bdaddr_t bdaddr;
> + if (bdaddr_s != NULL) {
> + (void) str2ba(bdaddr_s, &bdaddr);
> + memcpy(&data[3], &bdaddr, sizeof(bdaddr_t));
> + }
> + }
> +
> + {
> + int nw;
> + struct iovec iov_cmd[2];
> + iov_cmd[0].iov_base = cmdp;
> + iov_cmd[0].iov_len = sizeof(cmdp);
> + iov_cmd[1].iov_base = data;
> + iov_cmd[1].iov_len = cmd->plen;
> + nw = writev(fd, iov_cmd, 2);
> + FAILIF(nw != (int) sizeof(cmdp) + cmd->plen,
> + "Could not send entire command (sent only %d bytes)!\n",
> + nw);
> + }
> +
> + /* Wait for response */
> + if (read_command_complete(fd,
> + cmd->opcode,
> + cmd->plen) < 0) {
> + return -1;
> + }
> +
> + } while(1);
> + fprintf(stdout, "Firmware upload successful.\n");
> +
> + close(fw);
> + return 0;
> +}
> +
> +int qualcomm_init(int fd, int speed, struct termios *ti, const char *bdaddr)
> +{
> + struct timespec tm = {0, 50000};
> + char cmd[5];
> + unsigned char resp[100]; /* Response */
> + char fw[100];
> + int n;
> +
> + memset(resp,'\0', 100);
> +
> + /* Get Manufacturer and LMP version */
> + cmd[0] = HCI_COMMAND_PKT;
> + cmd[1] = 0x01;
> + cmd[2] = 0x10;
> + cmd[3] = 0x00;
> +
> + do {
> + n = write(fd, cmd, 4);
> + if (n < 0) {
> + perror("Failed to write init command (READ_LOCAL_VERSION_INFORMATION)");
> + return -1;
> + }
> + if (n < 4) {
> + fprintf(stderr, "Wanted to write 4 bytes, could only write %d. Stop\n", n);
> + return -1;
> + }
> +
> + /* Read reply. */
> + if (read_hci_event(fd, resp, 100) < 0) {
> + perror("Failed to read init response (READ_LOCAL_VERSION_INFORMATION)");
> + return -1;
> + }
> +
> + /* Wait for command complete event for our Opcode */
> + } while (resp[4] != cmd[1] && resp[5] != cmd[2]);
> +
> + /* Verify manufacturer */
> + if ((resp[11] & 0xFF) != 0x1d)
> + fprintf(stderr,"WARNING : module's manufacturer is not Qualcomm\n");
> +
> + /* Print LMP version */
> + fprintf(stderr, "Qualcomm module LMP version : 0x%02x\n", resp[10] & 0xFF);
> +
> + /* Print LMP subversion */
> + {
> + unsigned short lmp_subv = resp[13] | (resp[14] << 8);
> +
> + fprintf(stderr, "Qualcomm module LMP sub-version : 0x%04x\n", lmp_subv);
> +
> + }
> +
> + /* Get SoC type */
> + cmd[0] = HCI_COMMAND_PKT;
> + cmd[1] = 0x00;
> + cmd[2] = 0xFC;
> + cmd[3] = 0x01;
> + cmd[4] = 0x06;
> +
> + do {
> + n = write(fd, cmd, 5);
> + if (n < 0) {
> + perror("Failed to write init command");
> + return -1;
> + }
> + if (n < 5) {
> + fprintf(stderr, "Wanted to write 5 bytes, could only write %d. Stop\n", n);
> + return -1;
> + }
> +
> + /* Read reply. */
> + if ((n = read_hci_event(fd, resp, 100)) < 0) {
> + perror("Failed to read init response");
> + return -1;
> + }
> +
> + } while (resp[3] != 0 && resp[4] != 2);
> +
> + snprintf(fw, sizeof(fw),
> + "/etc/firmware/%c%c%c%c%c%c_%c%c%c%c.bin",
> + resp[18], resp[19], resp[20], resp[21],
> + resp[22], resp[23],
> + resp[32], resp[33], resp[34], resp[35]);
> +
> + /* Wait for command complete event for our Opcode */
> + if (read_hci_event(fd, resp, 100) < 0) {
> + perror("Failed to read init response");
> + return -1;
> + }
> +
> + qualcomm_load_firmware(fd, fw, bdaddr);
> +
> + /* Reset */
> + cmd[0] = HCI_COMMAND_PKT;
> + cmd[1] = 0x03;
> + cmd[2] = 0x0C;
> + cmd[3] = 0x00;
> +
> + do {
> + n = write(fd, cmd, 4);
> + if (n < 0) {
> + perror("Failed to write reset command");
> + return -1;
> + }
> + if (n < 4) {
> + fprintf(stderr, "Wanted to write 4 bytes, could only write %d. Stop\n", n);
> + return -1;
> + }
> +
> + /* Read reply. */
> + if ((n = read_hci_event(fd, resp, 100)) < 0) {
> + perror("Failed to read reset response");
> + return -1;
> + }
> +
> + } while (resp[4] != cmd[1] && resp[5] != cmd[2]);
> +
> + nanosleep(&tm, NULL);
> + return 0;
> +}
Ping
--
Ron Shaffer
Employee of the Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
