Hi Mat,
* Mat Martineau <mathewm@xxxxxxxxxxxxxx> [2010-08-12 16:36:57 -0700]:
>
>
> On Wed, 11 Aug 2010, Gustavo F. Padovan wrote:
>
> >Hi Mat,
> >
> >* Gustavo F. Padovan <gustavo@xxxxxxxxxxx> [2010-08-11 00:35:41 -0300]:
> >
> >>* Mat Martineau <mathewm@xxxxxxxxxxxxxx> [2010-08-10 12:15:00 -0700]:
> >>
> >>>In order to not limit ERTM and streaming mode PDUs to the HCI MTU
> >>>size, L2CAP must be able to split PDUs in to multple HCI fragments.
> >>>This is done by allocating space for the FCS in the last fragment.
> >>>
> >>>Signed-off-by: Mat Martineau <mathewm@xxxxxxxxxxxxxx>
> >>>---
> >>> net/bluetooth/l2cap.c | 39 ++++++++++++++++++++++++++++++++++-----
> >>> 1 files changed, 34 insertions(+), 5 deletions(-)
> >>>
> >>>diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c
> >>>index aa69c84..b485c4a 100644
> >>>--- a/net/bluetooth/l2cap.c
> >>>+++ b/net/bluetooth/l2cap.c
> >>>@@ -1664,31 +1664,63 @@ static inline int l2cap_skbuff_fromiovec(struct sock *sk, struct msghdr *msg, in
> >>> {
> >>> struct l2cap_conn *conn = l2cap_pi(sk)->conn;
> >>> struct sk_buff **frag;
> >>>+ struct sk_buff *final;
> >>> int err, sent = 0;
> >>>
> >>>+ BT_DBG("sk %p, msg %p, len %d, count %d, skb %p", sk,
> >>>+ msg, (int)len, (int)count, skb);
> >>>+
> >>> if (memcpy_fromiovec(skb_put(skb, count), msg->msg_iov, count))
> >>> return -EFAULT;
> >>>
> >>> sent += count;
> >>> len -= count;
> >>>+ final = skb;
> >>>
> >>> /* Continuation fragments (no L2CAP header) */
> >>> frag = &skb_shinfo(skb)->frag_list;
> >>> while (len) {
> >>>+ int skblen;
> >>> count = min_t(unsigned int, conn->mtu, len);
> >>>
> >>>- *frag = bt_skb_send_alloc(sk, count, msg->msg_flags & MSG_DONTWAIT, &err);
> >>>+ /* Add room for the FCS if it fits */
> >>>+ if (l2cap_pi(sk)->fcs == L2CAP_FCS_CRC16 &&
> >>>+ len + L2CAP_FCS_SIZE <= conn->mtu)
> >>
> >>You don't need to check for (len + L2CAP_FCS_SIZE <= conn=mtu) here.
> >>Section 5.1 point that:
> >>
> >>"Unlike the B-Frame length field, the I-frame length field may be greater
> >>than the configured MTU because it includes the octet lengths of the
> >>Control, L2CAP SDU Length (when present), and frame check sequence
> >>fields as well as the Information octets."
> >>
> >>From that I understand "len <=" and not "len + L2CAP_FCS_SIZE <="
> >
> >So here you might want to the check if we support FCS, and then add 2 to
> >skblen.
>
> That's what the code does, without violating the HCI MTU.
Yes, you are right!
>
> >>>+ skblen = count + L2CAP_FCS_SIZE;
> >>>+ else
> >>>+ skblen = count;
> >>>+
> >>>+ *frag = bt_skb_send_alloc(sk, skblen,
> >>>+ msg->msg_flags & MSG_DONTWAIT, &err);
> >>> if (!*frag)
> >>> return -EFAULT;
> >>>- if (memcpy_fromiovec(skb_put(*frag, count), msg->msg_iov, count))
> >>>+
> >>>+ if (memcpy_fromiovec(skb_put(*frag, count),
> >>>+ msg->msg_iov, count))
> >>> return -EFAULT;
> >>>
> >>> sent += count;
> >>> len -= count;
> >>>
> >>>+ final = *frag;
> >>>+
> >>> frag = &(*frag)->next;
> >>> }
> >>>
> >>>+ if (l2cap_pi(sk)->fcs == L2CAP_FCS_CRC16) {
> >>>+ if (skb_tailroom(final) < L2CAP_FCS_SIZE) {
> >>>+ *frag = bt_skb_send_alloc(sk, L2CAP_FCS_SIZE,
> >>>+ msg->msg_flags & MSG_DONTWAIT,
> >>>+ &err);
> >
> >Why do we need to check for FCS again? We already added it required
> >space to the last fragment.
> >
>
> If there was room in the HCI fragment, count+2 bytes were allocated
> with bt_skb_send_alloc. However, only count bytes were used by
> skb_put.
>
> This final block of code is doing two things:
>
> 1. Allocating a final HCI fragment for the FCS if there was not
> room for the FCS in the last data fragment.
>
> 2. Doing the skb_put for the FCS bytes.
>
> I will add some comments to this code to help clarify what's going on.
Ok, and do the other way around in the if:
if (l2cap_pi(sk)->fcs != L2CAP_FCS_CRC16)
return sent;
if (skb_tailroom(...
--
Gustavo F. Padovan
http://padovan.org
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
