Hi!
> > I believe the problem is 115200 bitrate between system and CF serial;
>
> and lack of flow control I assume ?
I guess so. (But flow control can be hard for bluetooth, I guess. Data
are coming from the air...)
> > I did setserial baud_base 921600, but that does not seem to speed it
> > up. Do I need to do some special magic to enable high speed?
>
> Just set the baud rate to 921600. You may need to write an app to do this
> directly via the TERMIOS2 ioctl because it seems three years ago is a bit
> quick for the glibc maintainers to keep up.
>
> Basically set the baud to BOTHER, set the ispeed = ospeed = 921600 and
> the kernel will do its best to give you your request
hciattach seems to do this:
...
open("/dev/ttyBT", O_RDWR|O_NOCTTY) = 3
ioctl(3, TCFLSH, 0x2) = 0
ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, {B115200 -opost -isig -icanon -echo ...}) = 0
ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, {B115200 -opost -isig -icanon -echo ...}) = 0
ioctl(3, SNDCTL_TMR_START or TCSETS, {B115200 -opost -isig -icanon -echo ...}) = 0
ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, {B115200 -opost -isig -icanon -echo ...}) = 0
ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, {B115200 -opost -isig -icanon -echo ...}) = 0
ioctl(3, SNDCTL_TMR_START or TCSETS, {B921600 -opost -isig -icanon -echo ...}) = 0
...set 921K using TCSETS/B921600... and kernel says ok, but ...
ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, {B115200 -opost -isig -icanon -echo ...}) = 0
ioctl(3, TCFLSH, 0x2) = 0
ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, {B115200 -opost -isig -icanon -echo ...}) = 0
...we are still at 115200... I wonder if 921600 is the right speed to
use after all? Any other speeds I should try? (and can 400MHz arm
handle 921K on serial line?)
...when I was setting 921600 baud_base, I basically broke it so that
it used 115200, right? I guess I should play a bit more...
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
