Hi! Today I got this... IIRC I was told it was fixed already...? Pavel ehci_hcd 0000:00:1d.7: suspend root hub EXT3 FS on sda4, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. iwl3945 0000:03:00.0: firmware: requesting iwlwifi-3945-2.ucode iwl3945 0000:03:00.0: iwlwifi-3945-2.ucode firmware file req failed: -2 iwl3945 0000:03:00.0: firmware: requesting iwlwifi-3945-1.ucode iwl3945 0000:03:00.0: Loaded firmware iwlwifi-3945-1.ucode, which is deprecated. Please use API v2 instead. iwl3945 0000:03:00.0: Firmware has old API version. Expected 2, got 1. New firmware can be obtained from http://www.intellinuxwireless.org. iwl3945 0000:03:00.0: loaded firmware version 15.28.1.8 Registered led device: iwl-phy0::radio Registered led device: iwl-phy0::assoc Registered led device: iwl-phy0::RX Registered led device: iwl-phy0::TX coda_read_super: Bad mount data coda_read_super: device index: 0 coda_read_super: rootfid is (01234567.ffffffff.08051b10.00000000) coda: Unexpected interruption. Failure of coda_cnode_make for root: error -4 CE: hpet increasing min_delta_ns to 15000 nsec CE: hpet increasing min_delta_ns to 22500 nsec uhci_hcd 0000:00:1d.3: reserve dev 2 ep81-INT, period 1, phase 0, 23 us INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. Pid: 30385, comm: ps Not tainted 2.6.32-rc5-00154-gfbad3ad-dirty #83 Call Trace: [<c0791da9>] ? printk+0x18/0x1a [<c0255492>] __lock_acquire+0x4a2/0xad0 [<c0255b28>] lock_acquire+0x68/0x90 [<c06733bd>] ? skb_dequeue+0x1d/0x70 [<c0794e0b>] _spin_lock_irqsave+0x3b/0x50 [<c06733bd>] ? skb_dequeue+0x1d/0x70 [<c06733bd>] skb_dequeue+0x1d/0x70 [<c0674034>] skb_queue_purge+0x14/0x20 [<c07139a7>] l2cap_recv_frame+0x5d7/0x3270 [<c02551e5>] ? __lock_acquire+0x1f5/0xad0 [<c02551e5>] ? __lock_acquire+0x1f5/0xad0 [<c06732c9>] ? skb_queue_tail+0x39/0x50 [<c02551e5>] ? __lock_acquire+0x1f5/0xad0 [<c050cd50>] ? usb_submit_urb+0x140/0x360 [<c02551e5>] ? __lock_acquire+0x1f5/0xad0 [<c07167d2>] l2cap_recv_acldata+0x192/0x3d0 [<c07079b8>] ? hci_rx_task+0x268/0x440 [<c0716640>] ? l2cap_recv_acldata+0x0/0x3d0 [<c07079e5>] hci_rx_task+0x295/0x440 [<c02551e5>] ? __lock_acquire+0x1f5/0xad0 [<c0235b30>] tasklet_action+0x50/0xb0 [<c0236275>] __do_softirq+0x85/0x110 [<c023632d>] do_softirq+0x2d/0x40 [<c0236495>] irq_exit+0x65/0x80 [<c0204bbf>] do_IRQ+0x4f/0xc0 [<c02034a9>] common_interrupt+0x29/0x30 [<c0794a2f>] ? _write_unlock_irq+0x1f/0x30 [<c023474f>] do_exit+0x3df/0x650 [<c021bdc2>] ? do_page_fault+0x152/0x240 [<c02349f3>] do_group_exit+0x33/0x90 [<c0234a63>] sys_exit_group+0x13/0x20 [<c0202e50>] sysenter_do_call+0x12/0x31 e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX 0000:02:00.0: eth0: 10/100 speed: disabling TSO hci_acl_tx_to: hci0 ACL tx timeout hci_acl_tx_to: hci0 killing stalled ACL connection 80:09:6E:BA:21:00 -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html -- To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
