On Thu, 26 Mar 2009, Gene Heskett wrote:
The dongle on the kubuntu box isn't ready/supported/working. You should see
it by scanning, and I've never had to do a manual 'hciconfig hci0 up' at
any time. If it's a USB congle, does it show with 'lsusb'? When you plug it
in, what kernel messages do you get? Are the bluez/dbus/usb systems all
complete on that box?
UNK at this point. I'll ssh into it and find out:
gene@goat:~$ lsusb
Bus 002 Device 004: ID 0e5e:6622 That is the devices make:prod ID
gene@goat:~$ sudo lsusb -v| grep -A75 'Bus 002 Device 004:'
Bus 002 Device 004: ID 0e5e:6622
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 224 Wireless
bDeviceSubClass 1 Radio Frequency
bDeviceProtocol 1 Bluetooth
bMaxPacketSize0 16
idVendor 0x0e5e
idProduct 0x6622
bcdDevice 1.34
iManufacturer 0
iProduct 0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 108
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
cannot read device status, Connection timed out (110)
can't get device qualifier: Connection timed out
can't get debug descriptor: Connection timed out
cannot read device status, Connection timed out (110)
That's not good. The command should complete normally. You seem to be missing
about half the data mine displays for this type of device. I'm no USB device
expert, but I'd guess the root of the problem is the bluetooth adapter itself.
My listing starts like this:
Bus 004 Device 002: ID 050d:0121 Belkin Components F5D5050 100Mbps Ethernet
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 224 Wireless
bDeviceSubClass 1 Radio Frequency
bDeviceProtocol 1 Bluetooth
bMaxPacketSize0 64
idVendor 0x050d Belkin Components
idProduct 0x0121 F5D5050 100Mbps Ethernet
bcdDevice 1.00
iManufacturer 1 Broadcom Corp
iProduct 2 BELKIN BLUETOOTH USB ADAPTER CL. 1
iSerial 0
bNumConfigurations 1
and ends with:
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 3
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 254 Application Specific Interface
bInterfaceSubClass 1 Device Firmware Update
bInterfaceProtocol 0
iInterface 0
** UNRECOGNIZED: 07 21 05 88 13 40 00
Device Status: 0x0000
(Bus Powered)
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
