Hi all,
In HID Host initiated connection to HID device, Host is sending L2CAP
control channel request message twice to the device. The hcidump logs
are as follows
< ACL data: handle 47 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 17 scid 0x0040
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 47 packets 1
> ACL data: handle 47 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 1 status 0
Connection pending - No futher information available
> HCI Event: Link Key Request (0x17) plen 6
bdaddr 00:02:5B:02:97:6E
< HCI Command: Link Key Request Negative Reply (0x01|0x000c) plen 6
bdaddr 00:02:5B:02:97:6E
> HCI Event: Command Complete (0x0e) plen 10
Link Key Request Negative Reply (0x01|0x000c) ncmd 1
status 0x00 bdaddr 00:02:5B:02:97:6E
> HCI Event: PIN Code Request (0x16) plen 6
bdaddr 00:02:5B:02:97:6E
< HCI Command: PIN Code Request Reply (0x01|0x000d) plen 23
bdaddr 00:02:5B:02:97:6E len 4 pin '0000'
> HCI Event: Command Complete (0x0e) plen 10
PIN Code Request Reply (0x01|0x000d) ncmd 1
status 0x00 bdaddr 00:02:5B:02:97:6E
> HCI Event: Link Key Notification (0x18) plen 23
bdaddr 00:02:5B:02:97:6E key B00AC8478BC923A0E1B269C5BB510584 type 0
Type: Combination Key
> HCI Event: Encrypt Change (0x08) plen 4
status 0x00 handle 47 encrypt 0x01
< ACL data: handle 47 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 17 scid 0x0040
> ACL data: handle 47 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0
Connection successful
< ACL data: handle 47 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 0
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 47 packets 1
After looking into the code, in l2cap.c function l2cap_encrypt_cfm()
If state is BT_CONNECT and status is 0, host again sends the second
L2cap_conn_req for control channel.
I am not sure even if encrypt== 0x01, bluez needs to send the second
L2cap_connect_req for control channel.
Can anyone please clarify this.
Thanks,
Skdeka
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
