Hi Thomas, > > However to be sure what is going on you have to run "hcidump -X -V" and > > you can set the link policy manually via "hciconfig hci0 lp". > Using "hciconfig hci0 lp RSWITCH,SNIFF" results in > | Can't set link policy on hci0: Connection timed out (110) > And I get this output from hcidump when issuing this command: > | HCI sniffer - Bluetooth packet analyzer ver 1.42 > | device: hci0 snap_len: 1028 filter: 0xffffffff > | < HCI Command: Write Default Link Policy Settings (0x02|0x000f) plen 2 > | policy 0x05 > | Link policy: RSWITCH SNIFF > | > HCI Event: Command Status (0x0f) plen 4 > | Write Default Link Policy Settings (0x02|0x000f) status 0x01 ncmd 1 > | Error: Unknown HCI Command > > I hope I find some time tomorrow to play around with other versions of > bluez-utils. this is a serious problem. Please show me hciconfig -a of your dongle. I have never seen a dongle that doesn't support Default Link Policy. Regards Marcel -- To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html