Re: bluez-4.11 + 2.6.27-rc8 + SCO headset -> bluetoothd: connect(): Connection timed out (110)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 05/10/08 19:50, Johan Hedberg wrote:
On Oct 5, 2008, at 1:24, Stuart Pook wrote:
not for me :-( I am once again getting the "aplay: set_params:979:
Unable to install hw params:" message after a 40 second delay.
The headset hisses softly to me during these 40 seconds.
The error message from bluetoothd is "connect(): Connection timed out (110)"
This seems to be some other error than the one that was fixed in 4.11. Could you try to get a hcidump of when this happens. It might be able to tell more about what's going on.

Ok, the dump is attached.  I removed 40 seconds of

> SCO data: handle 45 flags 0x00 dlen 48
    0000: eb ff ee 00 a7 00 81 00  b4 00 77 00 8d 00 65 00  ..........w...e.
    0010: c3 ff 61 ff fa fe 12 ff  66 ff 3d ff aa ff 1c 00  ..a.....f.=.....
    0020: f0 ff 12 00 40 00 2d 00  21 00 2b 00 3a 00 ec ff  ....@.-.!.+.:...

which made the file a lot shorter. I can send the full 3Mb file if
necessary but perhaps not to the whole list.

Sometimes bluetoothd segfaults.
That's something more serious. Could you please try to produce a backtrace, either with gdb or valgrind. Thanks!

I guess that I'll have to learn how to use valgrind again.

thanks for your help.

Stuart

PS this is still with my old Bluetooth 1.2 0a12:0001 Cambridge Silicon Radio
bluetooth dongle and my Jabra JX10 Series II headset

bluetoothd[28762]: Received AT+CIND=?
bluetoothd[28762]: Received AT+CIND?
bluetoothd[28762]: Received AT+CMER=3, 0, 0, 1
bluetoothd[28762]: Event reporting (CMER): mode=3, ind=1
bluetoothd[28762]: HFP Service Level Connection established
bluetoothd[28762]: telephony-dummy: device 0xb96e64d0 connected
bluetoothd[28762]: State changed /org/bluez/hci0/dev_00_1A_45_2F_49_98: HEADSET_STATE_CONNECT_IN_PROGRESS -> HEADSET_STATE_CONNECTED
bluetoothd[28762]: State changed /org/bluez/hci0/dev_00_1A_45_2F_49_98: HEADSET_STATE_CONNECTED -> HEADSET_STATE_PLAY_IN_PROGRESS
bluetoothd[28762]: Received AT+VGS=12
bluetoothd[28762]: connect(): Connection timed out (110)
bluetoothd[28762]: Audio API: sending BT_SETCONFIGURATION_RSP
bluetoothd[28762]: State changed /org/bluez/hci0/dev_00_1A_45_2F_49_98: HEADSET_STATE_PLAY_IN_PROGRESS -> HEADSET_STATE_CONNECTED
bluetoothd[28762]: Audio API: received BT_STREAMSTART_REQ
bluetoothd[28762]: Audio API: sending BT_STREAMSTART_RSP
bluetoothd[28762]: Audio API: sending BT_STREAMFD_IND
bluetoothd[28762]: unix_sendmsg_fd: Bad file descriptor(9)
bluetoothd[28762]: resume failed
bluetoothd[28762]: Audio API: sending BT_STREAMSTART_RSP
bluetoothd[28762]: Unix client disconnected (fd=23)
bluetoothd[28762]: No matching connection for handle 45

HCI sniffer - Bluetooth packet analyzer ver 1.42
device: hci0 snap_len: 1028 filter: 0xffffffff
< HCI Command: Create Connection (0x01|0x0005) plen 13
    bdaddr 00:1A:45:2F:49:98 ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
    Packet type: DM1 DM3 DM5 DH1 DH3 DH5 
> HCI Event: Command Status (0x0f) plen 4
    Create Connection (0x01|0x0005) status 0x00 ncmd 1
> HCI Event: Connect Complete (0x03) plen 11
    status 0x00 handle 41 bdaddr 00:1A:45:2F:49:98 type ACL encrypt 0x00
< HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
    handle 41
> HCI Event: Command Status (0x0f) plen 4
    Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 0
> HCI Event: Page Scan Repetition Mode Change (0x20) plen 7
    bdaddr 00:1A:45:2F:49:98 mode 1
> HCI Event: Max Slots Change (0x1b) plen 3
    handle 41 slots 5
> HCI Event: Command Status (0x0f) plen 4
    Unknown (0x00|0x0000) status 0x00 ncmd 1
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
    bdaddr 00:1A:45:2F:49:98 mode 2 clkoffset 0x0000
> HCI Event: Command Status (0x0f) plen 4
    Remote Name Request (0x01|0x0019) status 0x00 ncmd 1
> HCI Event: Read Remote Supported Features (0x0b) plen 11
    status 0x00 handle 41
    Features: 0xbf 0xfe 0x8b 0xf8 0x1b 0x18 0x00 0x80
< ACL data: handle 41 flags 0x02 dlen 10
    L2CAP(s): Info req: type 2
> HCI Event: Number of Completed Packets (0x13) plen 5
    handle 41 packets 1
> ACL data: handle 41 flags 0x02 dlen 16
    L2CAP(s): Info rsp: type 2 result 0
      Extended feature mask 0x0000
< ACL data: handle 41 flags 0x02 dlen 12
    L2CAP(s): Connect req: psm 3 scid 0x0040
> ACL data: handle 41 flags 0x02 dlen 16
    L2CAP(s): Connect rsp: dcid 0x0050 scid 0x0040 result 1 status 2
      Connection pending - Authorization pending
> HCI Event: Remote Name Req Complete (0x07) plen 255
    status 0x00 bdaddr 00:1A:45:2F:49:98 name 'Jabra JX10 series 2'
> HCI Event: Number of Completed Packets (0x13) plen 5
    handle 41 packets 1
> HCI Event: Link Key Request (0x17) plen 6
    bdaddr 00:1A:45:2F:49:98
< HCI Command: Link Key Request Reply (0x01|0x000b) plen 22
    bdaddr 00:1A:45:2F:49:98 key F63331CE2D0DBCA190DC73C930CD6117
> HCI Event: Command Complete (0x0e) plen 10
    Link Key Request Reply (0x01|0x000b) ncmd 1
    status 0x00 bdaddr 00:1A:45:2F:49:98
> ACL data: handle 41 flags 0x02 dlen 16
    L2CAP(s): Connect rsp: dcid 0x0050 scid 0x0040 result 0 status 0
      Connection successful
< ACL data: handle 41 flags 0x02 dlen 16
    L2CAP(s): Config req: dcid 0x0050 flags 0x00 clen 4
      MTU 1013 
> HCI Event: Number of Completed Packets (0x13) plen 5
    handle 41 packets 1
> ACL data: handle 41 flags 0x02 dlen 14
    L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
      Success
> ACL data: handle 41 flags 0x02 dlen 16
    L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
      MTU 1013 
< ACL data: handle 41 flags 0x02 dlen 18
    L2CAP(s): Config rsp: scid 0x0050 flags 0x00 result 0 clen 4
      MTU 1013 
< ACL data: handle 41 flags 0x02 dlen 8
    L2CAP(d): cid 0x0050 len 4 [psm 3]
      RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c 
> HCI Event: Number of Completed Packets (0x13) plen 5
    handle 41 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
    handle 41 packets 1
> ACL data: handle 41 flags 0x02 dlen 8
    L2CAP(d): cid 0x0040 len 4 [psm 3]
      RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7 
< ACL data: handle 41 flags 0x02 dlen 18
    L2CAP(d): cid 0x0050 len 14 [psm 3]
      RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8
      dlci 2 frame_type 0 credit_flow 15 pri 7 ack_timer 0
      frame_size 1008 max_retrans 0 credits 7
> HCI Event: Number of Completed Packets (0x13) plen 5
    handle 41 packets 1
> ACL data: handle 41 flags 0x02 dlen 18
    L2CAP(d): cid 0x0040 len 14 [psm 3]
      RFCOMM(s): PN RSP: cr 0 dlci 0 pf 0 ilen 10 fcs 0xaa mcc_len 8
      dlci 2 frame_type 0 credit_flow 14 pri 7 ack_timer 0
      frame_size 127 max_retrans 0 credits 0
< ACL data: handle 41 flags 0x02 dlen 8
    L2CAP(d): cid 0x0050 len 4 [psm 3]
      RFCOMM(s): SABM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x59 
> HCI Event: Number of Completed Packets (0x13) plen 5
    handle 41 packets 1
> ACL data: handle 41 flags 0x02 dlen 8
    L2CAP(d): cid 0x0040 len 4 [psm 3]
      RFCOMM(s): UA: cr 1 dlci 2 pf 1 ilen 0 fcs 0x92 
< ACL data: handle 41 flags 0x02 dlen 12
    L2CAP(d): cid 0x0050 len 8 [psm 3]
      RFCOMM(s): MSC CMD: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
      dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 0 b2 0 b3 0 len 0
> ACL data: handle 41 flags 0x02 dlen 12
    L2CAP(d): cid 0x0040 len 8 [psm 3]
      RFCOMM(s): MSC CMD: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
      dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 0 b1 0 b2 0 b3 0 len 0
< ACL data: handle 41 flags 0x02 dlen 12
    L2CAP(d): cid 0x0050 len 8 [psm 3]
      RFCOMM(s): MSC RSP: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
      dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 0 b1 0 b2 0 b3 0 len 0
> HCI Event: Number of Completed Packets (0x13) plen 5
    handle 41 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
    handle 41 packets 1
> ACL data: handle 41 flags 0x02 dlen 12
    L2CAP(d): cid 0x0040 len 8 [psm 3]
      RFCOMM(s): MSC RSP: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
      dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 0 b2 0 b3 0 len 0
< ACL data: handle 41 flags 0x02 dlen 9
    L2CAP(d): cid 0x0050 len 5 [psm 3]
      RFCOMM(d): UIH: cr 1 dlci 2 pf 1 ilen 0 fcs 0x86 credits 33
> ACL data: handle 41 flags 0x02 dlen 9
    L2CAP(d): cid 0x0040 len 5 [psm 3]
      RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 0 fcs 0x5c credits 15
> HCI Event: Number of Completed Packets (0x13) plen 5
    handle 41 packets 1
> ACL data: handle 41 flags 0x02 dlen 19
    L2CAP(d): cid 0x0040 len 15 [psm 3]
      RFCOMM(d): UIH: cr 0 dlci 2 pf 0 ilen 11 fcs 0x40 
      0000: 41 54 2b 42 52 53 46 3d  32 37 0d                 AT+BRSF=27.
< ACL data: handle 41 flags 0x02 dlen 21
    L2CAP(d): cid 0x0050 len 17 [psm 3]
      RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 13 fcs 0x9a 
      0000: 0d 0a 2b 42 52 53 46 3d  33 35 32 0d 0a           ..+BRSF=352..
< ACL data: handle 41 flags 0x02 dlen 14
    L2CAP(d): cid 0x0050 len 10 [psm 3]
      RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 6 fcs 0x9a 
      0000: 0d 0a 4f 4b 0d 0a                                 ..OK..
> HCI Event: Number of Completed Packets (0x13) plen 5
    handle 41 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
    handle 41 packets 1
> ACL data: handle 41 flags 0x02 dlen 19
    L2CAP(d): cid 0x0040 len 15 [psm 3]
      RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 10 fcs 0x5c credits 2
      0000: 41 54 2b 43 49 4e 44 3d  3f 0d                    AT+CIND=?.
< ACL data: handle 41 flags 0x02 dlen 135
    L2CAP(d): cid 0x0050 len 131 [psm 3]
      RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 127 fcs 0x9a 
      0000: 0d 0a 2b 43 49 4e 44 3a  28 22 62 61 74 74 63 68  ..+CIND:("battch
      0010: 67 22 2c 28 30 2d 35 29  29 2c 28 22 73 69 67 6e  g",(0-5)),("sign
      0020: 61 6c 22 2c 28 30 2d 35  29 29 2c 28 22 73 65 72  al",(0-5)),("ser
      0030: 76 69 63 65 22 2c 28 30  2c 31 29 29 2c 28 22 63  vice",(0,1)),("c
      0040: 61 6c 6c 22 2c 28 30 2c  31 29 29 2c 28 22 63 61  all",(0,1)),("ca
      0050: 6c 6c 73 65 74 75 70 22  2c 28 30 2d 33 29 29 2c  llsetup",(0-3)),
      0060: 28 22 63 61 6c 6c 68 65  6c 64 22 2c 28 30 2d 32  ("callheld",(0-2
      0070: 29 29 2c 28 22 72 6f 61  6d 22 2c 28 30 2c 31     )),("roam",(0,1
< ACL data: handle 41 flags 0x02 dlen 12
    L2CAP(d): cid 0x0050 len 8 [psm 3]
      RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 4 fcs 0x9a 
      0000: 29 29 0d 0a                                       ))..
< ACL data: handle 41 flags 0x02 dlen 14
    L2CAP(d): cid 0x0050 len 10 [psm 3]
      RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 6 fcs 0x9a 
      0000: 0d 0a 4f 4b 0d 0a                                 ..OK..
> HCI Event: Number of Completed Packets (0x13) plen 5
    handle 41 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
    handle 41 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
    handle 41 packets 1
> ACL data: handle 41 flags 0x02 dlen 18
    L2CAP(d): cid 0x0040 len 14 [psm 3]
      RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 9 fcs 0x5c credits 3
      0000: 41 54 2b 43 49 4e 44 3f  0d                       AT+CIND?.
< ACL data: handle 41 flags 0x02 dlen 31
    L2CAP(d): cid 0x0050 len 27 [psm 3]
      RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 23 fcs 0x9a 
      0000: 0d 0a 2b 43 49 4e 44 3a  35 2c 35 2c 31 2c 30 2c  ..+CIND:5,5,1,0,
      0010: 30 2c 30 2c 30 0d 0a                              0,0,0..
< ACL data: handle 41 flags 0x02 dlen 14
    L2CAP(d): cid 0x0050 len 10 [psm 3]
      RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 6 fcs 0x9a 
      0000: 0d 0a 4f 4b 0d 0a                                 ..OK..
> HCI Event: Number of Completed Packets (0x13) plen 5
    handle 41 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
    handle 41 packets 1
> ACL data: handle 41 flags 0x02 dlen 28
    L2CAP(d): cid 0x0040 len 24 [psm 3]
      RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 19 fcs 0x5c credits 2
      0000: 41 54 2b 43 4d 45 52 3d  33 2c 20 30 2c 20 30 2c  AT+CMER=3, 0, 0,
      0010: 20 31 0d                                           1.
< HCI Command: Add SCO Connection (0x01|0x0007) plen 4
    handle 41 ptype 0x00e0
    Packet type: HV1 HV2 HV3 
< ACL data: handle 41 flags 0x02 dlen 14
    L2CAP(d): cid 0x0050 len 10 [psm 3]
      RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 6 fcs 0x9a 
      0000: 0d 0a 4f 4b 0d 0a                                 ..OK..
> HCI Event: Number of Completed Packets (0x13) plen 5
    handle 41 packets 1
> HCI Event: Command Status (0x0f) plen 4
    Add SCO Connection (0x01|0x0007) status 0x00 ncmd 1
> HCI Event: Max Slots Change (0x1b) plen 3
    handle 41 slots 1
> ACL data: handle 41 flags 0x02 dlen 17
> ACL data: handle 41 flags 0x01 dlen 2
    L2CAP(d): cid 0x0040 len 15 [psm 3]
      RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 10 fcs 0x5c credits 1
      0000: 41 54 2b 56 47 53 3d 31  32 0d                    AT+VGS=12.
< ACL data: handle 41 flags 0x02 dlen 14
    L2CAP(d): cid 0x0050 len 10 [psm 3]
      RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 6 fcs 0x9a 
      0000: 0d 0a 4f 4b 0d 0a                                 ..OK..
> HCI Event: Number of Completed Packets (0x13) plen 5
    handle 41 packets 1
> HCI Event: Connect Complete (0x03) plen 11
    status 0x00 handle 45 bdaddr 00:1A:45:2F:49:98 type SCO encrypt 0x00
> HCI Event: Max Slots Change (0x1b) plen 3
    handle 41 slots 3
> SCO data: handle 45 flags 0x00 dlen 48
    0000: 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  ................
    0010: 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  ................
    0020: 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  ................
> SCO data: handle 45 flags 0x00 dlen 48
    0000: 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  ................
    0010: 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  ................
    0020: 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  ................
> SCO data: handle 45 flags 0x00 dlen 48
    0000: 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  ................
    0010: 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  ................
    0020: 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  ................
> SCO data: handle 45 flags 0x00 dlen 48
    0000: 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  ................
    0010: 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  ................
    0020: 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  ................
> SCO data: handle 45 flags 0x00 dlen 48
    0000: 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  ................
    0010: 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  ................
    0020: 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  ................
> SCO data: handle 45 flags 0x00 dlen 48
    0000: 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  ................
    0010: 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  ................
    0020: 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  ................
> SCO data: handle 45 flags 0x00 dlen 48
    0000: 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  ................
    0010: 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  ................
    0020: 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  ................
> SCO data: handle 45 flags 0x00 dlen 48
    0000: 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  ................
    0010: 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  ................
    0020: 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  ................
> SCO data: handle 45 flags 0x00 dlen 48
    0000: 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  ................
    0010: 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  ................
    0020: 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  ................
[.........]
    0000: 08 00 51 00 4d 00 f2 ff  cf ff 09 00 2b 00 e7 ff  ..Q.M.......+...
    0010: a2 ff bc ff 1f 00 22 00  e4 ff e9 ff e2 ff 05 00  ......".........
    0020: 31 00 13 00 02 00 f5 ff  1f 00 44 00 e5 ff b2 ff  1.........D.....
> SCO data: handle 45 flags 0x00 dlen 48
    0000: c2 ff c3 ff ef ff fd ff  03 00 1b 00 1e 00 33 00  ..............3.
    0010: 0e 00 ce ff d6 ff cd ff  fb ff 50 00 08 00 e8 ff  ..........P.....
    0020: 12 00 e7 ff 05 00 1a 00  f3 ff fc ff e7 ff e7 ff  ................
< HCI Command: Disconnect (0x01|0x0006) plen 3
    handle 45 reason 0x13
    Reason: Remote User Terminated Connection
> HCI Event: Command Status (0x0f) plen 4
    Disconnect (0x01|0x0006) status 0x00 ncmd 1
> SCO data: handle 45 flags 0x00 dlen 48
    0000: f0 ff c3 ff ab ff dc ff  22 00 1f 00 18 00 0f 00  ........".......
    0010: dd ff d8 ff fb ff 24 00  21 00 20 00 47 00 15 00  ......$.!. .G...
    0020: cb ff a7 ff cd ff 2d 00  f8 ff d8 ff 08 00 d6 ff  ......-.........
> SCO data: handle 45 flags 0x00 dlen 48
    0000: f5 ff 1c 00 fd ff 36 00  2a 00 f3 ff 1c 00 03 00  ......6.*.......
    0010: d9 ff 02 00 0b 00 0a 00  fd ff d3 ff d2 ff db ff  ................
    0020: e8 ff 0a 00 2a 00 2f 00  0e 00 bc ff b3 ff 10 00  ....*./.........
> SCO data: handle 45 flags 0x00 dlen 48
    0000: dc ff c7 ff 23 00 e2 ff  ca ff f4 ff f0 ff fe ff  ....#...........
    0010: f6 ff 0c 00 22 00 1d 00  13 00 13 00 2a 00 04 00  ....".......*...
    0020: 08 00 2a 00 fa ff e3 ff  e5 ff 1a 00 3c 00 f1 ff  ..*.........<...
> SCO data: handle 45 flags 0x00 dlen 48
    0000: ff ff 0a 00 c4 ff ed ff  14 00 b8 ff 8c ff fb ff  ................
    0010: 09 00 b4 ff f4 ff 0a 00  c3 ff e3 ff 1a 00 03 00  ................
    0020: d8 ff ec ff fe ff 08 00  33 00 0b 00 07 00 47 00  ........3.....G.
> SCO data: handle 45 flags 0x00 dlen 48
    0000: 0a 00 df ff 14 00 27 00  32 00 24 00 fd ff ff ff  ......'.2.$.....
    0010: 02 00 ed ff c5 ff a6 ff  c6 ff 02 00 e8 ff c5 ff  ................
    0020: fb ff f5 ff e5 ff 05 00  0f 00 06 00 df ff 0e 00  ................
> SCO data: handle 45 flags 0x00 dlen 48
    0000: 45 00 17 00 0d 00 fa ff  d8 ff f4 ff 1d 00 47 00  E.............G.
    0010: 39 00 03 00 da ff df ff  00 00 ea ff fe ff 18 00  9...............
    0020: cd ff c3 ff e3 ff cc ff  d0 ff fd ff 17 00 12 00  ................
> HCI Event: Disconn Complete (0x05) plen 4
    status 0x00 handle 45 reason 0x16
    Reason: Connection Terminated by Local Host
> SCO data: handle 45 flags 0x00 dlen 48
    0000: 13 00 f3 ff d6 ff 01 00  21 00 16 00 04 00 00 00  ........!.......
    0010: f5 ff fe ff 24 00 ec ff  d3 ff 15 00 fc ff e7 ff  ....$...........
    0020: 00 00 fa ff f1 ff 0a 00  2f 00 ef ff b6 ff c1 ff  ......../.......
> SCO data: handle 45 flags 0x00 dlen 48
    0000: 9e ff 0f 00 93 00 01 00  c7 ff 21 00 12 00 2e 00  ..........!.....
    0010: 96 ff 24 ff 9d 01 ab 00  0d fd 79 00 8e 00 fc fe  ..$.......y.....
    0020: e4 03 c3 ff 07 fd d7 00  4b fe f5 ff 2a 00 3d fe  ........K...*.=.
> HCI Event: Max Slots Change (0x1b) plen 3
    handle 41 slots 5

[Index of Archives]     [Bluez Devel]     [Linux Wireless Networking]     [Linux Wireless Personal Area Networking]     [Linux ATH6KL]     [Linux USB Devel]     [Linux Media Drivers]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Big List of Linux Books]

  Powered by Linux