--- On Thu, 25/9/08, Marcel Holtmann <marcel@xxxxxxxxxxxx> wrote:
> load btusb or hci_usb with reset=1 and if that helps, I can
> add a quirk for this dongle.
Yes, that certainly did the trick :-) !! There's a bit of noise in the dmesg log from usbhid:
usb 4-1: new full speed USB device using uhci_hcd and address 28
usb 4-1: configuration #1 chosen from 1 choice
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 3 ports detected
usb 4-1.1: new full speed USB device using uhci_hcd and address 29
usb 4-1.1: configuration #1 chosen from 1 choice
input: HID 0a5c:4502 as /class/input/input18
input,hidraw0: USB HID v1.11 Keyboard [HID 0a5c:4502] on usb-0000:00:1d.2-1.1
usb 4-1.2: new full speed USB device using uhci_hcd and address 30
usb 4-1.2: configuration #1 chosen from 1 choice
input: HID 0a5c:4503 as /class/input/input19
input,hidraw1: USB HID v1.11 Mouse [HID 0a5c:4503] on usb-0000:00:1d.2-1.2
usb 4-1.3: new full speed USB device using uhci_hcd and address 31
usb 4-1.3: configuration #1 chosen from 1 choice
usbhid: input irq status -75 received
usbhid: input irq status -75 received
usbhid: input irq status -75 received
usbhid: input irq status -75 received
usbhid: input irq status -75 received
usbhid: input irq status -75 received
usbhid: input irq status -75 received
usbhid: input irq status -75 received
usbhid: input irq status -75 received
usbhid: input irq status -75 received
usbhid: input irq status -75 received
usbhid: input irq status -75 received
usbhid: input irq status -75 received
usbhid: input irq status -75 received
usbhid: input irq status -75 received
But it does actually (seem to) work now:
# hciconfig -a hci1
hci1: Type: USB
BD Address: 00:0A:3A:83:76:DA ACL MTU: 1021:8 SCO MTU: 64:1
UP RUNNING PSCAN
RX bytes:2536 acl:0 sco:0 events:37 errors:0
TX bytes:628 acl:0 sco:0 commands:37 errors:0
Features: 0xff 0xff 0x8f 0xfe 0x9b 0xff 0x79 0x83
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
Name: 'whatever-1'
Class: 0x080104
Service Classes: Capturing
Device Class: Computer, Desktop workstation
HCI Ver: 2.1 (0x4) HCI Rev: 0x5184 LMP Ver: 2.1 (0x4) LMP Subver: 0x420e
Manufacturer: Broadcom Corporation (15)
Thanks,
Chris
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
