Am Donnerstag 31 Juli 2008 16:03:13 schrieb Marcel Holtmann:
> Both table updates should be a separate patch and we can even submit
> that for 2.6.27 inclusion. I was just to lazy to do that, but I have
> it on my todo list, but the Simple Pairing support had higher priority.
This patch implements the quirks from hci_usb in btusb, too.
Signed-off-by: Oliver Neukum <oneukum@xxxxxxx>
Regards
Oliver
---
--- linux-2.6.22/drivers/bluetooth/btusb.c 2008-08-01 10:53:38.000000000 +0200
+++ linux-2.6.26/drivers/bluetooth/btusb.c 2008-08-01 13:47:54.000000000 +0200
@@ -41,21 +41,108 @@
#define BT_DBG(D...)
#endif
-#define VERSION "0.1"
+#define VERSION "0.3"
+
+#define HCI_IGNORE 0x01
+#define HCI_RESET 0x02
+#define HCI_DIGIANSWER 0x04
+#define HCI_CSR 0x08
+#define HCI_SNIFFER 0x10
+#define HCI_BCM92035 0x20
+#define HCI_BROKEN_ISOC 0x40
+#define HCI_WRONG_SCO_MTU 0x80
static struct usb_device_id btusb_table[] = {
/* Generic Bluetooth USB device */
{ USB_DEVICE_INFO(0xe0, 0x01, 0x01) },
+ /* AVM BlueFRITZ! USB v2.0 */
+ { USB_DEVICE(0x057c, 0x3800) },
+
+ /* Bluetooth Ultraport Module from IBM */
+ { USB_DEVICE(0x04bf, 0x030a) },
+
+ /* ALPS Modules with non-standard id */
+ { USB_DEVICE(0x044e, 0x3001) },
+ { USB_DEVICE(0x044e, 0x3002) },
+
+ /* Ericsson with non-standard id */
+ { USB_DEVICE(0x0bdb, 0x1002) },
+
+ /* Canyon CN-BTU1 with HID interfaces */
+ { USB_DEVICE(0x0c10, 0x0000), .driver_info = HCI_RESET },
+
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, btusb_table);
static struct usb_device_id blacklist_table[] = {
+ /* CSR BlueCore devices */
+ { USB_DEVICE(0x0a12, 0x0001), .driver_info = HCI_CSR },
+
+ /* Broadcom BCM2033 without firmware */
+ { USB_DEVICE(0x0a5c, 0x2033), .driver_info = HCI_IGNORE },
+
+ /* Broadcom BCM2035 */
+ { USB_DEVICE(0x0a5c, 0x2035), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU },
+ { USB_DEVICE(0x0a5c, 0x200a), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU },
+
+ /* Broadcom BCM2045 */
+ { USB_DEVICE(0x0a5c, 0x2039), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU },
+ { USB_DEVICE(0x0a5c, 0x2101), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU },
+
+ /* IBM/Lenovo ThinkPad with Broadcom chip */
+ { USB_DEVICE(0x0a5c, 0x201e), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU },
+ { USB_DEVICE(0x0a5c, 0x2110), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU },
+
+ /* Targus ACB10US */
+ { USB_DEVICE(0x0a5c, 0x2100), .driver_info = HCI_RESET },
+
+ /* ANYCOM Bluetooth USB-200 and USB-250 */
+ { USB_DEVICE(0x0a5c, 0x2111), .driver_info = HCI_RESET },
+
+ /* HP laptop with Broadcom chip */
+ { USB_DEVICE(0x03f0, 0x171d), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU },
+
+ /* Dell laptop with Broadcom chip */
+ { USB_DEVICE(0x413c, 0x8126), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU },
+
+ /* Microsoft Wireless Transceiver for Bluetooth 2.0 */
+ { USB_DEVICE(0x045e, 0x009c), .driver_info = HCI_RESET },
+
+ /* Kensington Bluetooth USB adapter */
+ { USB_DEVICE(0x047d, 0x105d), .driver_info = HCI_RESET },
+ { USB_DEVICE(0x047d, 0x105e), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU },
+
+ /* ISSC Bluetooth Adapter v3.1 */
+ { USB_DEVICE(0x1131, 0x1001), .driver_info = HCI_RESET },
+
+ /* RTX Telecom based adapters with buggy SCO support */
+ { USB_DEVICE(0x0400, 0x0807), .driver_info = HCI_BROKEN_ISOC },
+ { USB_DEVICE(0x0400, 0x080a), .driver_info = HCI_BROKEN_ISOC },
+
+ /* CONWISE Technology based adapters with buggy SCO support */
+ { USB_DEVICE(0x0e5e, 0x6622), .driver_info = HCI_BROKEN_ISOC },
+
+ /* Belkin F8T012 and F8T013 devices */
+ { USB_DEVICE(0x050d, 0x0012), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU },
+ { USB_DEVICE(0x050d, 0x0013), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU },
+
+ /* Digianswer devices */
+ { USB_DEVICE(0x08fd, 0x0001), .driver_info = HCI_DIGIANSWER },
+ { USB_DEVICE(0x08fd, 0x0002), .driver_info = HCI_IGNORE },
+
+ /* CSR BlueCore Bluetooth Sniffer */
+ { USB_DEVICE(0x0a12, 0x0002), .driver_info = HCI_SNIFFER },
+
+ /* Frontline ComProbe Bluetooth Sniffer */
+ { USB_DEVICE(0x16d3, 0x0002), .driver_info = HCI_SNIFFER },
{ } /* Terminating entry */
};
+static struct usb_driver btusb_driver;
+
#define BTUSB_INTR_RUNNING 0
#define BTUSB_BULK_RUNNING 1
@@ -78,6 +165,16 @@ struct btusb_data {
struct usb_endpoint_descriptor *bulk_rx_ep;
};
+static int ignore_dga;
+static int ignore_csr;
+static int ignore_sniffer;
+static int disable_scofix;
+#ifdef CONFIG_BT_HCIUSB_SCO
+static int force_scofix;
+#endif
+static int reset;
+static int override_ignore;
+
static void btusb_intr_complete(struct urb *urb)
{
struct hci_dev *hdev = urb->context;
@@ -433,6 +530,7 @@ static int btusb_probe(struct usb_interf
BT_DBG("intf %p id %p", intf, id);
+ /* interface numbers are hardcoded in the spec */
if (intf->cur_altsetting->desc.bInterfaceNumber != 0)
return -ENODEV;
@@ -443,6 +541,15 @@ static int btusb_probe(struct usb_interf
id = match;
}
+ if (id->driver_info == HCI_IGNORE && !override_ignore)
+ return -ENODEV;
+ if (ignore_sniffer && id->driver_info & HCI_SNIFFER)
+ return -ENODEV;
+ if (ignore_csr && id->driver_info & HCI_CSR)
+ return -ENODEV;
+ if (ignore_dga && id->driver_info & HCI_DIGIANSWER)
+ return -ENODEV;
+
data = kzalloc(sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
@@ -503,7 +610,15 @@ static int btusb_probe(struct usb_interf
hdev->owner = THIS_MODULE;
- set_bit(HCI_QUIRK_RESET_ON_INIT, &hdev->quirks);
+ if (reset || id->driver_info & HCI_RESET)
+ set_bit(HCI_QUIRK_RESET_ON_INIT, &hdev->quirks);
+
+#ifdef CONFIG_BT_HCIUSB_SCO
+ if (force_scofix || id->driver_info & HCI_WRONG_SCO_MTU) {
+ if (!disable_scofix)
+ set_bit(HCI_QUIRK_FIXUP_BUFFER_SIZE, &hdev->quirks);
+ }
+#endif
err = hci_register_dev(hdev);
if (err < 0) {
@@ -558,6 +673,29 @@ static void __exit btusb_exit(void)
module_init(btusb_init);
module_exit(btusb_exit);
+module_param(reset, bool, 0644);
+MODULE_PARM_DESC(reset, "Skip HCI reset command on initialization");
+
+#ifdef CONFIG_BT_HCIUSB_SCO
+module_param(force_scofix, bool, 0644);
+MODULE_PARM_DESC(force_scofix, "Force fixup of wrong SCO buffers size");
+#endif
+
+module_param(disable_scofix, bool, 0644);
+MODULE_PARM_DESC(disable_scofix, "Disable fixup of wrong SCO buffer size");
+
+module_param(ignore_csr, bool, 0644);
+MODULE_PARM_DESC(ignore_csr, "Ignore devices with id 0a12:0001");
+
+module_param(ignore_sniffer, bool, 0644);
+MODULE_PARM_DESC(ignore_sniffer, "Ignore devices with id 0a12:0002");
+
+module_param(ignore_dga, bool, 0644);
+MODULE_PARM_DESC(ignore_dga, "Ignore devices with id 08fd:0001");
+
+module_param(override_ignore, bool, 0644);
+MODULE_PARM_DESC(override_ignore, "Drive blacklisted devices");
+
MODULE_AUTHOR("Marcel Holtmann <marcel@xxxxxxxxxxxx>");
MODULE_DESCRIPTION("Generic Bluetooth USB driver ver " VERSION);
MODULE_VERSION(VERSION);
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
