On Wed, 28 May 2008 11:50:34 +0200 Alejandro Riveira Fern__ndez <alejandro.riveira@xxxxxxxxx> wrote: > I sent this to the list with other mail address and it didn't reach it > afaics. apologies if someone sees this twice > > i cced wireless becouse of the first oops > > First boot into 2.6.26-rc4 > > Compiled and booting into 2.6.26-rc4 > > 1) With splash quiet on grub line it doesn't boot (or i didin't wait long > enough) > 2) without quiet and splash I get into VT X filas becouse i use the evil > nvidia driver that's expected. But ubuntu failsafe mode (xserver with vesa > in low res) doesn't show up either *regression* > 3) i get an oops with network manager > 4) if i try to run some sudo command it gets stuck (Crtl +C doesnt' help) > "ip route" gets stuck too. User programs i tried wrok fine (only ls and > htop). Network realted problem? > > 5) printk times on dmesg go crazy > > But the second time a boot into it i got a working system (i even compiled the > *famous* nvidia driver) with only a bluetooth related oops ... > > Both dmesg follow. This is on a hardy 8.04 64 bits system. If more info is needed > just ask > > ... > > Working Second one > [ 0.000000] Linux version 2.6.26-rc4 (alex@Varda) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #28 SMP PREEMPT Mon May 26 21:46:39 CEST 2008 > [ 0.000000] Command line: BOOT_IMAGE=(hd0,2)/vmlinuz-2.6.26-rc4 root=UUID=ee465ea1-394d-4dd2-a5f9-a35567176c40 ro quiet splash > [ 0.000000] BIOS-provided physical RAM map: > [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > [ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved) > [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bffb0000 (usable) > [ 0.000000] BIOS-e820: 00000000bffb0000 - 00000000bffc0000 (ACPI data) > [ 0.000000] BIOS-e820: 00000000bffc0000 - 00000000bfff0000 (ACPI NVS) > [ 0.000000] BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved) > [ 0.000000] BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved) > [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used > [ 0.000000] Entering add_active_range(0, 256, 786352) 1 entries of 256 used > [ 0.000000] max_pfn_mapped = 1048576 > [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 > [ 0.000000] init_memory_mapping > [ 0.000000] DMI present. > [ 0.000000] ACPI: RSDP 000F90F0, 0014 (r0 ACPIAM) > [ 0.000000] ACPI: RSDT BFFB0000, 0040 (r1 A M I OEMRSDT 3000715 MSFT 97) > [ 0.000000] ACPI: FACP BFFB0200, 0084 (r2 A M I OEMFACP 12000601 MSFT 97) > [ 0.000000] ACPI: DSDT BFFB0440, 4B5A (r1 AM2ES AM2ES136 136 INTL 2002026) > [ 0.000000] ACPI: FACS BFFC0000, 0040 > [ 0.000000] ACPI: APIC BFFB0390, 0068 (r1 A M I OEMAPIC 3000715 MSFT 97) > [ 0.000000] ACPI: MCFG BFFB0400, 003C (r1 A M I OEMMCFG 3000715 MSFT 97) > [ 0.000000] ACPI: SSDT BFFB4FA0, 002B (r1 OEM_ID OEMTBLID 1 INTL 2002026) > [ 0.000000] ACPI: OEMB BFFC0040, 0056 (r1 A M I AMI_OEM 3000715 MSFT 97) > [ 0.000000] ACPI: HPET BFFB4FD0, 0038 (r1 A M I OEMHPET 3000715 MSFT 97) > [ 0.000000] ACPI: SSDT BFFB5010, 01C4 (r1 A M I POWERNOW 1 AMD 1) > [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used > [ 0.000000] Entering add_active_range(0, 256, 786352) 1 entries of 256 used > [ 0.000000] early res: 0 [0-fff] BIOS data page > [ 0.000000] early res: 1 [6000-7fff] TRAMPOLINE > [ 0.000000] early res: 2 [200000-5b3bcb] TEXT DATA BSS > [ 0.000000] early res: 3 [37c9d000-37fef7af] RAMDISK > [ 0.000000] early res: 4 [9fc00-fffff] BIOS reserved > [ 0.000000] early res: 5 [8000-cfff] PGTABLE > [ 0.000000] [ffffe20000000000-ffffe200029fffff] PMD -> [ffff810001200000-ffff810003bfffff] on node 0 > [ 0.000000] Zone PFN ranges: > [ 0.000000] DMA 0 -> 4096 > [ 0.000000] DMA32 4096 -> 1048576 > [ 0.000000] Normal 1048576 -> 1048576 > [ 0.000000] Movable zone start PFN for each node > [ 0.000000] early_node_map[2] active PFN ranges > [ 0.000000] 0: 0 -> 159 > [ 0.000000] 0: 256 -> 786352 > [ 0.000000] On node 0 totalpages: 786255 > [ 0.000000] DMA zone: 56 pages used for memmap > [ 0.000000] DMA zone: 1053 pages reserved > [ 0.000000] DMA zone: 2890 pages, LIFO batch:0 > [ 0.000000] DMA32 zone: 10695 pages used for memmap > [ 0.000000] DMA32 zone: 771561 pages, LIFO batch:31 > [ 0.000000] Normal zone: 0 pages used for memmap > [ 0.000000] Movable zone: 0 pages used for memmap > [ 0.000000] Detected use of extended apic ids on hypertransport bus > [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) > [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) > [ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 > [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec10000] gsi_base[24]) > [ 0.000000] IOAPIC[1]: apic_id 3, version 0, address 0xfec10000, GSI 24-44 > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) > [ 0.000000] ACPI: IRQ0 used by override. > [ 0.000000] ACPI: IRQ2 used by override. > [ 0.000000] ACPI: IRQ9 used by override. > [ 0.000000] Setting APIC routing to flat > [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000 > [ 0.000000] Using ACPI (MADT) for SMP configuration information > [ 0.000000] Allocating PCI resources starting at c4000000 (gap: c0000000:3f380000) > [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs > [ 0.000000] PERCPU: Allocating 33860 bytes of per cpu data > [ 0.000000] NR_CPUS: 2, nr_cpu_ids: 2 > [4294014.506571] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 774451 > [4294014.506571] Kernel command line: BOOT_IMAGE=(hd0,2)/vmlinuz-2.6.26-rc4 root=UUID=ee465ea1-394d-4dd2-a5f9-a35567176c40 ro quiet splash > [4294014.506571] Initializing CPU#0 > [4294014.506571] Preemptible RCU implementation. > [4294014.506571] PID hash table entries: 4096 (order: 12, 32768 bytes) > [4294014.506571] TSC calibrated against PM_TIMER > [4294014.506571] Marking TSC unstable due to TSCs unsynchronized > [4294014.506571] time.c: Detected 1999.972 MHz processor. > [4294014.506571] Console: colour VGA+ 80x25 > [4294014.506571] console [tty0] enabled > [4294014.506571] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) > [4294014.506571] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) > [4294014.506571] Checking aperture... > [4294014.506571] Node 0: aperture @ b56a000000 size 32 MB > [4294014.506571] Aperture beyond 4GB. Ignoring. > [4294014.506571] No AGP bridge found > [4294014.506571] Memory: 3087728k/3145408k available (2085k kernel code, 56648k reserved, 948k data, 240k init) > [4294014.506571] CPA: page pool initialized 1 of 1 pages preallocated > [4294014.506571] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 > [4294014.506571] hpet clockevent registered > [4294014.566574] Calibrating delay using timer specific routine.. 4002.05 BogoMIPS (lpj=2001028) > [4294014.566602] Mount-cache hash table entries: 256 > [4294014.566737] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > [4294014.566740] CPU: L2 Cache: 512K (64 bytes/line) > [4294014.566749] CPU: Physical Processor ID: 0 > [4294014.566751] CPU: Processor Core ID: 0 > [4294014.566772] ACPI: Core revision 20080321 > [4294014.583515] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 > [4294014.583519] Using local APIC timer interrupts. > [4294014.584559] APIC timer calibration result 12499834 > [4294014.584559] Detected 12.499 MHz APIC timer. > [4294014.584559] Booting processor 1/1 ip 6000 > [4294014.594453] Initializing CPU#1 > [4294014.594453] Calibrating delay using timer specific routine.. 3999.78 BogoMIPS (lpj=1999893) > [4294014.594453] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > [4294014.594453] CPU: L2 Cache: 512K (64 bytes/line) > [4294014.594453] CPU: Physical Processor ID: 0 > [4294014.594453] CPU: Processor Core ID: 1 > [4294014.594453] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 > [4294014.655548] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 > [4294014.655548] Brought up 2 CPUs > [4294014.655548] Total of 2 processors activated (8001.84 BogoMIPS). > [4294014.655548] CPU0 attaching sched-domain: > [4294014.655548] domain 0: span 0-1 > [4294014.655548] groups: 0 1 > [4294014.655548] CPU1 attaching sched-domain: > [4294014.655548] domain 0: span 0-1 > [4294014.655548] groups: 1 0 > [4294014.655548] net_namespace: 1176 bytes > [4294014.655548] NET: Registered protocol family 16 > [4294014.656548] No dock devices found. > [4294014.656548] node 0 link 0: io port [1000, ffffff] > [4294014.656548] TOM: 00000000c0000000 aka 3072M > [4294014.656548] node 0 link 0: mmio [e0000000, efffffff] > [4294014.656548] node 0 link 0: mmio [a0000, bffff] > [4294014.656548] node 0 link 0: mmio [c0000000, ffffffff] > [4294014.656548] bus: [00,ff] on node 0 link 0 > [4294014.656548] bus: 00 index 0 io port: [0, ffff] > [4294014.656548] bus: 00 index 1 mmio: [c0000000, fcffffffff] > [4294014.656548] bus: 00 index 2 mmio: [a0000, bffff] > [4294014.656548] ACPI: bus type pci registered > [4294014.656548] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 > [4294014.656548] PCI: Not using MMCONFIG. > [4294014.656548] PCI: Using configuration type 1 for base access > [4294014.658149] ACPI: EC: Look up EC in DSDT > [4294014.666546] ACPI: Interpreter enabled > [4294014.666546] ACPI: (supports S0 S1 S3 S5) > [4294014.666546] ACPI: Using IOAPIC for interrupt routing > [4294014.666546] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 > [4294014.670545] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources > [4294014.680931] PCI: Using MMCONFIG at e0000000 - efffffff > [4294014.689543] ACPI: PCI Root Bridge [PCI0] (0000:00) > [4294014.690002] pci 0000:00:15.1: quirk: region 4000-403f claimed by ali7101 ACPI > [4294014.690532] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > [4294014.690634] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE2P._PRT] > [4294014.690634] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB1._PRT] > [4294014.690735] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB2._PRT] > [4294014.690831] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB3._PRT] > [4294014.690927] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB4._PRT] > [4294014.702633] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) > [4294014.702633] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12 14 15) > [4294014.702633] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15) > [4294014.702633] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15) > [4294014.702804] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15) > [4294014.702971] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 6 *10 11 12 14 15) > [4294014.703135] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15) > [4294014.703297] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15), disabled. > [4294014.703463] ACPI: PCI Interrupt Link [LNKP] (IRQs 3 4 5 6 7 *10 11 12 14 15) > [4294014.703715] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 52, should be 25 [20080321] > [4294014.703733] Linux Plug and Play Support v0.97 (c) Adam Belay > [4294014.704632] pnp: PnP ACPI init > [4294014.704632] ACPI: bus type pnp registered > [4294014.708981] pnp: PnP ACPI: found 16 devices > [4294014.708984] ACPI: ACPI bus type pnp unregistered > [4294014.709632] SCSI subsystem initialized > [4294014.709632] libata version 3.00 loaded. > [4294014.709632] PCI: Using ACPI for IRQ routing > [4294014.719989] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 > [4294014.719989] hpet0: 3 64-bit timers, 14318180 Hz > [4294014.720989] ACPI: RTC can wake from S4 > [4294014.721854] Switched to high resolution mode on CPU 0 > [4294014.722329] Switched to high resolution mode on CPU 1 > [4294014.730896] system 00:08: ioport range 0x4d0-0x4d1 has been reserved > [4294014.730900] system 00:08: ioport range 0x4000-0x40bf could not be reserved > [4294014.730903] system 00:08: ioport range 0x40c0-0x40df has been reserved > [4294014.730906] system 00:08: ioport range 0x400-0x40f has been reserved > [4294014.730910] system 00:08: ioport range 0x480-0x48f has been reserved > [4294014.730914] system 00:08: iomem range 0xfff80000-0xffffffff could not be reserved > [4294014.730917] system 00:08: iomem range 0xfec10000-0xfec10fff has been reserved > [4294014.730920] system 00:08: iomem range 0xfe000000-0xfe0000ff has been reserved > [4294014.730930] system 00:0a: iomem range 0xff380000-0xffffffff could not be reserved > [4294014.730933] system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved > [4294014.730936] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved > [4294014.730944] system 00:0d: ioport range 0x290-0x29f has been reserved > [4294014.730954] system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved > [4294014.730964] system 00:0f: iomem range 0x0-0x9ffff could not be reserved > [4294014.730967] system 00:0f: iomem range 0xc0000-0xcffff has been reserved > [4294014.730970] system 00:0f: iomem range 0xe0000-0xfffff could not be reserved > [4294014.730973] system 00:0f: iomem range 0x100000-0xbfffffff could not be reserved > [4294014.730977] system 00:0f: iomem range 0x0-0xffffffffffffffff could not be reserved > [4294014.731028] PCI: Bridge: 0000:00:01.0 > [4294014.731028] IO window: d000-dfff > [4294014.731028] MEM window: 0xdc000000-0xdeefffff > [4294014.731028] PREFETCH window: 0x00000000c0000000-0x00000000cfffffff > [4294014.731028] PCI: Bridge: 0000:00:02.0 > [4294014.731028] IO window: disabled. > [4294014.731028] MEM window: disabled. > [4294014.731028] PREFETCH window: 0x00000000dad00000-0x00000000dadfffff > [4294014.731028] PCI: Bridge: 0000:00:03.0 > [4294014.731028] IO window: disabled. > [4294014.731028] MEM window: disabled. > [4294014.731028] PREFETCH window: 0x00000000dae00000-0x00000000daefffff > [4294014.731028] PCI: Bridge: 0000:00:04.0 > [4294014.731028] IO window: disabled. > [4294014.731028] MEM window: disabled. > [4294014.731028] PREFETCH window: 0x00000000daf00000-0x00000000daffffff > [4294014.731028] PCI: Bridge: 0000:00:11.0 > [4294014.731028] IO window: e000-efff > [4294014.731028] MEM window: 0xdef00000-0xdeffffff > [4294014.731028] PREFETCH window: disabled. > [4294014.731028] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 29 (level, low) -> IRQ 29 > [4294014.731028] PCI: Setting latency timer of device 0000:00:01.0 to 64 > [4294014.731028] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 34 (level, low) -> IRQ 34 > [4294014.731028] PCI: Setting latency timer of device 0000:00:02.0 to 64 > [4294014.731028] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 39 (level, low) -> IRQ 39 > [4294014.731028] PCI: Setting latency timer of device 0000:00:03.0 to 64 > [4294014.731028] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 44 (level, low) -> IRQ 44 > [4294014.731028] PCI: Setting latency timer of device 0000:00:04.0 to 64 > [4294014.731028] PCI: Setting latency timer of device 0000:00:11.0 to 64 > [4294014.731028] NET: Registered protocol family 2 > [4294014.766931] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) > [4294014.767962] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) > [4294014.770873] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) > [4294014.771872] TCP: Hash tables configured (established 262144 bind 65536) > [4294014.771872] TCP reno registered > [4294014.783041] checking if image is initramfs... it is > [4294015.045048] Freeing initrd memory: 3401k freed > [4294015.051986] JFS: nTxBlock = 8192, nTxLock = 65536 > [4294015.055910] msgmni has been set to 6038 for ipc namespace ffffffff804de850 > [4294015.055910] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) > [4294015.055910] io scheduler noop registered > [4294015.055910] io scheduler cfq registered (default) > [4294015.055910] pci 0000:00:00.0: Enabling HT MSI Mapping > [4294015.055910] pci 0000:00:01.0: Enabling HT MSI Mapping > [4294015.055910] pci 0000:00:02.0: Enabling HT MSI Mapping > [4294015.055910] pci 0000:00:03.0: Enabling HT MSI Mapping > [4294015.055910] pci 0000:00:04.0: Enabling HT MSI Mapping > [4294015.090159] pci 0000:01:00.0: Boot video device > [4294015.091091] PCI: Setting latency timer of device 0000:00:01.0 to 64 > [4294015.091091] assign_interrupt_mode Found MSI capability > [4294015.091091] Allocate Port Service[0000:00:01.0:pcie00] > [4294015.091091] Allocate Port Service[0000:00:01.0:pcie01] > [4294015.091091] Allocate Port Service[0000:00:01.0:pcie03] > [4294015.091091] PCI: Setting latency timer of device 0000:00:02.0 to 64 > [4294015.091091] assign_interrupt_mode Found MSI capability > [4294015.091091] Allocate Port Service[0000:00:02.0:pcie00] > [4294015.091091] Allocate Port Service[0000:00:02.0:pcie01] > [4294015.091091] Allocate Port Service[0000:00:02.0:pcie03] > [4294015.091091] PCI: Setting latency timer of device 0000:00:03.0 to 64 > [4294015.091091] assign_interrupt_mode Found MSI capability > [4294015.091091] Allocate Port Service[0000:00:03.0:pcie00] > [4294015.091091] Allocate Port Service[0000:00:03.0:pcie01] > [4294015.091091] Allocate Port Service[0000:00:03.0:pcie03] > [4294015.091091] PCI: Setting latency timer of device 0000:00:04.0 to 64 > [4294015.091091] assign_interrupt_mode Found MSI capability > [4294015.091091] Allocate Port Service[0000:00:04.0:pcie00] > [4294015.091091] Allocate Port Service[0000:00:04.0:pcie01] > [4294015.091091] Allocate Port Service[0000:00:04.0:pcie03] > [4294015.094486] Load service driver aer on pcie device 0000:00:01.0:pcie01 > [4294015.096278] Load service driver aer on pcie device 0000:00:02.0:pcie01 > [4294015.098374] Load service driver aer on pcie device 0000:00:03.0:pcie01 > [4294015.101231] Load service driver aer on pcie device 0000:00:04.0:pcie01 > [4294015.104250] hpet_resources: 0xfed00000 is busy > [4294015.104250] Linux agpgart interface v0.103 > [4294015.106233] brd: module loaded > [4294015.106233] Driver 'sd' needs updating - please use bus_type methods > [4294015.106233] ahci 0000:00:16.1: version 3.0 > [4294015.106233] ACPI: PCI Interrupt 0000:00:16.1[A] -> GSI 21 (level, low) -> IRQ 21 > [4294016.107111] ahci 0000:00:16.1: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl SATA mode > [4294016.107116] ahci 0000:00:16.1: flags: ncq sntf ilck pm led clo pmp pio slum part > [4294016.108086] scsi0 : ahci > [4294016.108086] scsi1 : ahci > [4294016.108086] scsi2 : ahci > [4294016.108086] scsi3 : ahci > [4294016.109086] ata1: SATA max UDMA/133 abar m1024@0xdbfef400 port 0xdbfef500 irq 21 > [4294016.109086] ata2: SATA max UDMA/133 abar m1024@0xdbfef400 port 0xdbfef580 irq 21 > [4294016.109086] ata3: SATA max UDMA/133 abar m1024@0xdbfef400 port 0xdbfef600 irq 21 > [4294016.109086] ata4: SATA max UDMA/133 abar m1024@0xdbfef400 port 0xdbfef680 irq 21 > [4294016.413763] ata1: SATA link down (SStatus 0 SControl 300) > [4294016.718761] ata2: SATA link down (SStatus 0 SControl 300) > [4294017.023761] ata3: SATA link down (SStatus 0 SControl 300) > [4294017.481760] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > [4294017.523746] ata4.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133 > [4294017.523746] ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) > [4294017.542743] ata4.00: configured for UDMA/133 > [4294017.509792] isa bounce pool size: 16 pages > [4294017.509792] scsi 3:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 > [4294017.509792] sd 3:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) > [4294017.509792] sd 3:0:0:0: [sda] Write Protect is off > [4294017.509792] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 > [4294017.509792] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > [4294017.509792] sd 3:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) > [4294017.509792] sd 3:0:0:0: [sda] Write Protect is off > [4294017.509792] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 > [4294017.509792] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > [4294017.509792] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > > [4294017.638996] sd 3:0:0:0: [sda] Attached SCSI disk > [4294017.638996] ACPI: PCI Interrupt 0000:00:16.0[A] -> GSI 21 (level, low) -> IRQ 21 > [4294017.638996] scsi4 : pata_ali > [4294017.653998] scsi5 : pata_ali > [4294017.669599] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 > [4294017.669602] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 > [4294017.995282] ata5.00: ATA-6: ST3160021A, 8.01, max UDMA/100 > [4294017.995285] ata5.00: 312581808 sectors, multi 16: LBA48 > [4294017.995505] ata5.01: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133 > [4294017.995507] ata5.01: 160086528 sectors, multi 16: LBA > [4294018.001296] ata5.00: configured for UDMA/100 > [4294018.007279] ata5.01: configured for UDMA/133 > [4294018.161367] ata6.00: ATAPI: _NEC DVD_RW ND-3540A, 1.01, max UDMA/33 > [4294018.161376] ata6.00: WARNING: ATAPI DMA disabled for reliablity issues. It can be enabled > [4294018.161379] ata6.00: WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node. > [4294018.167300] ata6.00: configured for UDMA/33 > [4294018.167300] scsi 4:0:0:0: Direct-Access ATA ST3160021A 8.01 PQ: 0 ANSI: 5 > [4294018.167300] sd 4:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB) > [4294018.167300] sd 4:0:0:0: [sdb] Write Protect is off > [4294018.167300] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 > [4294018.167300] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > [4294018.167300] sd 4:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB) > [4294018.167300] sd 4:0:0:0: [sdb] Write Protect is off > [4294018.167300] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 > [4294018.167300] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > [4294018.167300] sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 > > [4294018.167301] sd 4:0:0:0: [sdb] Attached SCSI disk > [4294018.234378] scsi 4:0:1:0: Direct-Access ATA Maxtor 6Y080L0 YAR4 PQ: 0 ANSI: 5 > [4294018.235319] sd 4:0:1:0: [sdc] 160086528 512-byte hardware sectors (81964 MB) > [4294018.235319] sd 4:0:1:0: [sdc] Write Protect is off > [4294018.235319] sd 4:0:1:0: [sdc] Mode Sense: 00 3a 00 00 > [4294018.235319] sd 4:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > [4294018.235319] sd 4:0:1:0: [sdc] 160086528 512-byte hardware sectors (81964 MB) > [4294018.235319] sd 4:0:1:0: [sdc] Write Protect is off > [4294018.235319] sd 4:0:1:0: [sdc] Mode Sense: 00 3a 00 00 > [4294018.235319] sd 4:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > [4294018.235319] sdc: sdc1 sdc2 sdc3 > [4294018.240319] sd 4:0:1:0: [sdc] Attached SCSI disk > [4294018.242223] scsi 5:0:0:0: CD-ROM _NEC DVD_RW ND-3540A 1.01 PQ: 0 ANSI: 5 > [4294018.243223] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 > [4294018.243223] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp > [4294018.243223] serio: i8042 KBD port at 0x60,0x64 irq 1 > [4294018.243247] mice: PS/2 mouse device common for all mice > [4294018.271586] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 > [4294018.280588] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 > [4294018.280588] rtc0: alarms up to one month > [4294018.280588] cpuidle: using governor ladder > [4294018.280588] cpuidle: using governor menu > [4294018.280588] TCP cubic registered > [4294018.280588] ieee80211: 802.11 data/management/control stack, git-1.1.13 > [4294018.280588] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@xxxxxxxxxxxxxxx> > [4294018.280588] ieee80211_crypt: registered algorithm 'NULL' > [4294018.280588] rtc_cmos 00:02: setting system clock to 2008-05-28 08:56:00 UTC (1211964960) > [4294018.280588] Freeing unused kernel memory: 240k freed > [4294018.280618] Write protecting the kernel read-only data: 2828k > [4294019.437523] fuse init (API version 7.9) > [4294019.446192] ACPI: duty_cycle spans bit 4 > [4294019.446523] ACPI: ACPI0007:00 is registered as cooling_device0 > [4294019.446523] ACPI: ACPI0007:01 is registered as cooling_device1 > [4294019.451660] NET: Registered protocol family 1 > [4294019.594060] usbcore: registered new interface driver usbfs > [4294019.594123] usbcore: registered new interface driver hub > [4294019.596066] usbcore: registered new device driver usb > [4294019.596066] r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded > [4294019.596066] ACPI: PCI Interrupt 0000:05:0b.0[A] -> GSI 19 (level, low) -> IRQ 19 > [4294019.596315] eth0: RTL8110s at 0xffffc20000030c00, 00:4f:63:00:a4:73, XID 04000000 IRQ 19 > [4294019.601061] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver > [4294019.601061] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 17 (level, low) -> IRQ 17 > [4294019.601061] ohci_hcd 0000:00:13.0: OHCI Host Controller > [4294019.601076] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 > [4294019.601100] ohci_hcd 0000:00:13.0: irq 17, io mem 0xdbfee000 > [4294019.622812] sd 3:0:0:0: Attached scsi generic sg0 type 0 > [4294019.622841] sd 4:0:0:0: Attached scsi generic sg1 type 0 > [4294019.622865] sd 4:0:1:0: Attached scsi generic sg2 type 0 > [4294019.622888] scsi 5:0:0:0: Attached scsi generic sg3 type 5 > [4294019.654885] usb usb1: configuration #1 chosen from 1 choice > [4294019.654914] hub 1-0:1.0: USB hub found > [4294019.654927] hub 1-0:1.0: 3 ports detected > [4294019.675883] Floppy drive(s): fd0 is 1.44M > [4294019.690544] FDC 0 is a post-1991 82077 > [4294019.757057] ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 18 (level, low) -> IRQ 18 > [4294019.757057] ohci_hcd 0000:00:13.1: OHCI Host Controller > [4294019.757057] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2 > [4294019.757057] ohci_hcd 0000:00:13.1: irq 18, io mem 0xdbfed000 > [4294019.809971] usb usb2: configuration #1 chosen from 1 choice > [4294019.810001] hub 2-0:1.0: USB hub found > [4294019.810011] hub 2-0:1.0: 3 ports detected > [4294019.911541] ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 19 (level, low) -> IRQ 19 > [4294019.911541] ohci_hcd 0000:00:13.2: OHCI Host Controller > [4294019.911541] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3 > [4294019.911541] ohci_hcd 0000:00:13.2: irq 19, io mem 0xdbfec000 > [4294019.964555] usb usb3: configuration #1 chosen from 1 choice > [4294019.964585] hub 3-0:1.0: USB hub found > [4294019.964596] hub 3-0:1.0: 3 ports detected > [4294019.975364] usb 1-2: new low speed USB device using ohci_hcd and address 2 > [4294020.066385] ACPI: PCI Interrupt 0000:00:13.3[D] -> GSI 23 (level, low) -> IRQ 23 > [4294020.066385] ehci_hcd 0000:00:13.3: EHCI Host Controller > [4294020.066385] ehci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 4 > [4294020.087400] ehci_hcd 0000:00:13.3: debug port 1 > [4294020.087417] ehci_hcd 0000:00:13.3: irq 23, io mem 0xdbfef800 > [4294020.101639] ehci_hcd 0000:00:13.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 > [4294020.101729] usb usb4: configuration #1 chosen from 1 choice > [4294020.101757] hub 4-0:1.0: USB hub found > [4294020.101765] hub 4-0:1.0: 8 ports detected > [4294020.505794] usb 1-2: device not accepting address 2, error -62 > [4294020.556569] hub 1-0:1.0: unable to enumerate USB device on port 2 > [4294020.925197] hub 4-0:1.0: unable to enumerate USB device on port 2 > [4294021.141297] hub 4-0:1.0: unable to enumerate USB device on port 8 > [4294021.358691] usb 1-2: new low speed USB device using ohci_hcd and address 4 > [4294021.505050] usb 1-2: configuration #1 chosen from 1 choice > [4294021.732057] usb 3-2: new full speed USB device using ohci_hcd and address 2 > [4294021.897145] usb 3-2: configuration #1 chosen from 1 choice > [4294027.122417] uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29) > [4294027.122417] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 20 (level, low) -> IRQ 20 > [4294027.145416] eth1: ULi M5263 at pci0000:00:12.0, 00:13:8f:b3:14:a4, irq 20. > [4294027.152419] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 > [4294027.158483] ACPI: Power Button (FF) [PWRF] > [4294027.158617] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 > [4294027.167469] ACPI: Power Button (CM) [PWRB] > [4294027.233616] ali15x3_smbus 0000:00:15.1: ALI15X3_smb region uninitialized - upgrade BIOS or use force_addr=0xaddr > [4294027.233616] ali15x3_smbus 0000:00:15.1: ALI15X3 not detected, module not inserted. > [4294027.250701] ali1535_smbus 0000:00:15.1: ALI1535_smb region uninitialized - upgrade BIOS? > [4294027.250706] ali1535_smbus 0000:00:15.1: ALI1535 not detected, module not inserted. > [4294027.433976] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x1904 > [4294027.433976] usbcore: registered new interface driver usblp > [4294027.449798] usbcore: registered new interface driver hiddev > [4294027.455956] input: KYE NetScroll+ Traveler as /devices/pci0000:00/0000:00:13.0/usb1/1-2/1-2:1.0/input/input3 > [4294027.462644] input,hidraw0: USB HID v1.10 Mouse [KYE NetScroll+ Traveler] on usb-0000:00:13.0-2 > [4294027.462669] usbcore: registered new interface driver usbhid > [4294027.462673] usbhid: v2.6:USB HID core driver > [4294027.539417] ACPI: PCI Interrupt 0000:05:0a.0[A] -> GSI 18 (level, low) -> IRQ 18 > [4294027.562595] phy0: Selected rate control algorithm 'pid' > [4294027.590852] input: PC Speaker as /devices/platform/pcspkr/input/input4 > [4294027.677079] Driver 'sr' needs updating - please use bus_type methods > [4294027.681082] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray > [4294027.681082] Uniform CD-ROM driver Revision: 3.20 > [4294027.681082] sr 5:0:0:0: Attached scsi CD-ROM sr0 > [4294027.685552] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled > [4294027.686028] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > [4294027.704444] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > [4294027.769735] parport_pc 00:06: reported by Plug and Play ACPI > [4294027.769735] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] > [4294027.900664] Registered led device: rt2500pci-phy0:radio > [4294027.900929] udev: renamed network interface eth1 to eth0 > [4294027.951195] udev: renamed network interface eth0_rename to eth1 > [4294028.122821] ACPI: PCI Interrupt 0000:00:14.0[C] -> GSI 22 (level, low) -> IRQ 22 > [4294028.132675] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... > [4294028.806243] lp0: using parport0 (interrupt-driven). > [4294028.820714] w83627ehf: Found W83627EHG chip at 0x290 > [4294028.977309] Adding 1992020k swap on /dev/sdb7. Priority:1 extents:1 across:1992020k > [4294029.014282] Adding 1020116k swap on /dev/sdc2. Priority:1 extents:1 across:1020116k > [4294031.457231] ip_tables: (C) 2000-2006 Netfilter Core Team > [4294032.698611] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) > [4294033.907220] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ processors (2 cpu cores) (version 2.20.00) > [4294033.906944] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0xa > [4294033.906944] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xc > [4294033.906944] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12 > [4294035.793408] NET: Registered protocol family 10 > [4294035.795734] lo: Disabled Privacy Extensions > [4294036.032974] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) > [4294037.729296] Clocksource tsc unstable (delta = -249471632 ns) > [4294042.180312] ADDRCONF(NETDEV_UP): eth0: link is not ready > [4294042.204390] r8169: eth1: link down > [4294042.205306] r8169: eth1: link down > [4294042.206416] ADDRCONF(NETDEV_UP): eth1: link is not ready > [4294042.231137] BUG: scheduling while atomic: S25bluetooth/4382/0x00010002 > [4294042.231144] CPU 1: > [4294042.231146] Modules linked in: ipv6 container powernow_k8 cpufreq_userspace cpufreq_stats cpufreq_powersave cpufreq_ondemand freq_table cpufreq_conservative nf_conntrack_ftp nf_conntrack_irc xt_tcpudp ipt_ULOG xt_limit xt_state nf_conntrack_ipv4 nf_conntrack iptable_filter ip_tables x_tables kvm_amd kvm w83627ehf hwmon_vid lp snd_hda_intel snd_pcm_oss snd_mixer_oss arc4 snd_pcm ecb parport_pc parport crypto_blkcipher snd_mpu401 snd_mpu401_uart 8250_pnp 8250 serial_core snd_seq_dummy sr_mod cdrom cryptomgr crypto_algapi evdev snd_seq_oss pcspkr snd_seq_midi snd_rawmidi k8temp rt2500pci rt2x00pci rt2x00lib snd_seq_midi_event rfkill usbhid snd_seq led_class usblp ff_memless input_polldev mac80211 snd_timer snd_seq_device cfg80211 snd eeprom_93cx6 i2c_ali1535 i2c_ali15x3 soundcore snd_page_alloc i2c_core button uli526x floppy sg ata_generic ehci_hcd ohci_hcd r8169 usbcore unix thermal processor fan fuse > [4294042.231224] Pid: 4382, comm: S25bluetooth Not tainted 2.6.26-rc4 #28 > [4294042.231227] RIP: 0010:[<ffffffff80265b99>] [<ffffffff80265b99>] free_pgd_range+0xbf/0x3c3 > [4294042.231302] RSP: 0018:ffff8100b9f05bf8 EFLAGS: 00000286 > [4294042.231306] RAX: ffff8100be51ba80 RBX: 0000000000400000 RCX: 00000000006f7000 > [4294042.231309] RDX: 00007f0000000000 RSI: 0000000000400000 RDI: ffff8100b9f05cf0 > [4294042.231312] RBP: 0000000000000080 R08: 00007f1f3d012000 R09: ffff8100b9e0d7f8 > [4294042.231315] R10: ffff8100b9e0d7f8 R11: ffff8100bf593390 R12: 00000080bf592f18 > [4294042.231319] R13: 0000000000000001 R14: 0000000000000080 R15: ffff8100b9f05c08 > [4294042.231322] FS: 00007f1f3d5756e0(0000) GS:ffff8100bf806580(0000) knlGS:0000000000000000 > [4294042.231326] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b > [4294042.231329] CR2: 0000000000617ee8 CR3: 00000000b9e0e000 CR4: 00000000000006e0 > [4294042.231332] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > [4294042.231335] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 > [4294042.231338] > [4294042.231339] Call Trace: > [4294042.231344] [<ffffffff80263b0e>] ? unmap_vmas+0x4d4/0x792 > [4294042.231363] [<ffffffff8026622e>] ? free_pgtables+0x87/0x99 > [4294042.231372] [<ffffffff802675b4>] ? exit_mmap+0xa0/0x120 > [4294042.231380] [<ffffffff8022bbe3>] ? mmput+0x20/0xa4 > [4294042.231386] [<ffffffff8027dcae>] ? flush_old_exec+0x4b6/0x7cf > [4294042.231390] [<ffffffff80279ce6>] ? vfs_read+0x10b/0x11f > [4294042.231399] [<ffffffff802a8a37>] ? load_elf_binary+0x0/0x1738 > [4294042.231405] [<ffffffff802a8da6>] ? load_elf_binary+0x36f/0x1738 > [4294042.231409] [<ffffffff802acc16>] ? load_elf_binary+0x16bf/0x17e2 > [4294042.231417] [<ffffffff80264dcc>] ? get_user_pages+0x32f/0x389 > [4294042.231427] [<ffffffff8027ca2c>] ? get_arg_page+0x46/0xa5 > [4294042.231437] [<ffffffff802a8a37>] ? load_elf_binary+0x0/0x1738 > [4294042.231443] [<ffffffff8027ce71>] ? search_binary_handler+0xdb/0x21d > [4294042.231452] [<ffffffff8027e119>] ? do_execve+0x152/0x1d6 > [4294042.231461] [<ffffffff8020981a>] ? sys_execve+0x35/0x53 > [4294042.231468] [<ffffffff8020b59a>] ? stub_execve+0x6a/0xc0 > [4294042.231481] > [4294042.244824] ADDRCONF(NETDEV_UP): wlan0: link is not ready > [4294042.352377] Bluetooth: Core ver 2.11 > [4294042.358411] NET: Registered protocol family 31 > [4294042.358416] Bluetooth: HCI device and connection manager initialized > [4294042.358421] Bluetooth: HCI socket layer initialized > [4294042.408932] Bluetooth: L2CAP ver 2.9 > [4294042.408932] Bluetooth: L2CAP socket layer initialized > [4294042.427442] Bluetooth: RFCOMM socket layer initialized > [4294042.427460] Bluetooth: RFCOMM TTY layer initialized > [4294042.427463] Bluetooth: RFCOMM ver 1.8 > [4294043.376174] NET: Registered protocol family 17 > [4294045.202822] uli526x: eth0 NIC Link is Down > OK, that's nasty. I'd say that there is a locking imbalance somewhere in the bluetooth initalisation code and this resulted in the above warning much later on. otoh it might be somewhere in networking core, given that it comes before bluetooth really gets going. Ingo, I think you used to have a tool which would help us find this? Thanks. -- To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
