Re: [PATCH v8 1/9] block: Introduce queue limits for copy-offload support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 3/29/23 19:41, Nitesh Shetty wrote:
>>> +What:		/sys/block/<disk>/queue/copy_max_bytes
>>> +Date:		November 2022
>>> +Contact:	linux-block@xxxxxxxxxxxxxxx
>>> +Description:
>>> +		[RW] While 'copy_max_bytes_hw' is the hardware limit for the
>>> +		device, 'copy_max_bytes' setting is the software limit.
>>> +		Setting this value lower will make Linux issue smaller size
>>> +		copies from block layer.
>>
>> 		This is the maximum number of bytes that the block
>>                 layer will allow for a copy request. Must be smaller than
>>                 or equal to the maximum size allowed by the hardware indicated
> 
> Looks good.  Will update in next version. We took reference from discard. 
> 
>> 		by copy_max_bytes_hw. Write 0 to use the default kernel
>> 		settings.
>>
> 
> Nack, writing 0 will not set it to default value. (default value is
> copy_max_bytes = copy_max_bytes_hw)

It is trivial to make it work that way, which would match how max_sectors_kb
works. Write 0 to return copy_max_bytes being equal to the default
copy_max_bytes_hw.

The other possibility that is also interesting is "write 0 to disable copy
offload and use emulation". This one may actually be more useful.

> 
>>> +
>>> +
>>> +What:		/sys/block/<disk>/queue/copy_max_bytes_hw
>>> +Date:		November 2022
>>> +Contact:	linux-block@xxxxxxxxxxxxxxx
>>> +Description:
>>> +		[RO] Devices that support offloading copy functionality may have
>>> +		internal limits on the number of bytes that can be offloaded
>>> +		in a single operation. The `copy_max_bytes_hw`
>>> +		parameter is set by the device driver to the maximum number of
>>> +		bytes that can be copied in a single operation. Copy
>>> +		requests issued to the device must not exceed this limit.
>>> +		A value of 0 means that the device does not
>>> +		support copy offload.
>>
>> 		[RO] This is the maximum number of kilobytes supported in a
>>                 single data copy offload operation. A value of 0 means that the
>> 		device does not support copy offload.
>>
> 
> Nack, value is in bytes. Same as discard.

Typo. I meant Bytes. Your text is too long an too convoluted, so unclear.

-- 
Damien Le Moal
Western Digital Research




[Index of Archives]     [Linux RAID]     [Linux SCSI]     [Linux ATA RAID]     [IDE]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Device Mapper]

  Powered by Linux