Hello
I found blktests scsi/004 failed[2] on the latest linux-scsi/for-next,
bisecting shows it was introduced from[1], pls help check it and let
me know if you need any testing for it, thanks.
[1]
151f0ec9ddb5 (HEAD) scsi: scsi_debug: Drop sdebug_dev_info.num_in_q
[2]
+ ./check scsi/004
scsi/004 (ensure repeated TASK SET FULL results in EIO on timing out
command) [failed]
runtime 1.889s ... 1.851s
--- tests/scsi/004.out 2023-03-27 02:51:16.755636763 -0400
+++ /root/blktests/results/nodev/scsi/004.out.bad 2023-03-27
22:49:53.511526901 -0400
@@ -1,3 +1,2 @@
Running scsi/004
-Input/output error
Test complete
dmesg:
[ 268.314709] run blktests scsi/004 at 2023-03-27 22:49:51
[ 268.325391] scsi_debug:sdebug_driver_probe: scsi_debug: trim
poll_queues to 0. poll_q/nr_hw = (0/1)
[ 268.325398] scsi host0: scsi_debug: version 0191 [20210520]
dev_size_mb=8, opts=0x0, submit_queues=1, statistics=1
[ 268.325575] scsi 0:0:0:0: Direct-Access Linux scsi_debug
0191 PQ: 0 ANSI: 7
[ 268.325693] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 268.325775] sd 0:0:0:0: Power-on or device reset occurred
[ 268.345884] sd 0:0:0:0: [sda] 16384 512-byte logical blocks: (8.39
MB/8.00 MiB)
[ 268.355905] sd 0:0:0:0: [sda] Write Protect is off
[ 268.355909] sd 0:0:0:0: [sda] Mode Sense: 73 00 10 08
[ 268.375943] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, supports DPO and FUA
[ 268.406011] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[ 268.406016] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes
[ 268.537442] sd 0:0:0:0: [sda] Attached SCSI disk
[ 270.067115] sd 0:0:0:0: [sda] Synchronizing SCSI cache
--
Best Regards,
Yi Zhang
