Hello, This series adds support for Command Duration Limits. The series is based on linux tag: v6.3-rc1 The series can also be found in git: https://github.com/floatious/linux/commits/cdl-v4 ================= CDL in ATA / SCSI ================= Command Duration Limits is defined in: T13 ATA Command Set - 5 (ACS-5) and T10 SCSI Primary Commands - 6 (SPC-6) respectively (a simpler version of CDL is defined in T10 SPC-5). CDL defines Duration Limits Descriptors (DLD). 7 DLDs for read commands and 7 DLDs for write commands. Simply put, a DLD contains a limit and a policy. A command can specify that a certain limit should be applied by setting the DLD index field (3 bits, so 0-7) in the command itself. The DLD index points to one of the 7 DLDs. DLD index 0 means no descriptor, so no limit. DLD index 1-7 means DLD 1-7. A DLD can have a few different policies, but the two major ones are: -Policy 0xF (abort), command will be completed with command aborted error (ATA) or status CHECK CONDITION (SCSI), with sense data indicating that the command timed out. -Policy 0xD (complete-unavailable), command will be completed without error (ATA) or status GOOD (SCSI), with sense data indicating that the command timed out. Note that the command will not have transferred any data to/from the device when the command timed out, even though the command returned success. Regardless of the CDL policy, in case of a CDL timeout, the I/O will result in a -ETIME error to user-space. The DLDs are defined in the CDL log page(s) and are readable and writable. Reading and writing the CDL DLDs are outside the scope of the kernel. If a user wants to read or write the descriptors, they can do so using a user-space application that sends passthrough commands, such as cdl-tools: https://github.com/westerndigitalcorporation/cdl-tools/commits/cdl-v4 ================================ The introduction of ioprio hints ================================ What the kernel does provide, is a method to let I/O use one of the CDL DLDs defined in the device. Note that the kernel will simply forward the DLD index to the device, so the kernel currently does not know, nor does it need to know, how the DLDs are defined inside the device. The way that the CDL DLD index is supplied to the kernel is by introducing a new 10 bit "ioprio hint" field within the existing 16 bit ioprio definition. Currently, only 6 out of the 16 ioprio bits are in use, the remaining 10 bits are unused, and are currently explicitly disallowed to be set by the kernel. For now, we only add ioprio hints representing CDL DLD index 1-7. Additional ioprio hints for other QoS features could be defined in the future. A theoretical future work could be to make an I/O scheduler aware of these hints. E.g. for CDL, an I/O scheduler could make use of the duration limit in each descriptor, and take that information into account while scheduling commands. Right now, the ioprio hints will be ignored by the I/O schedulers. ============================== How to use CDL from user-space ============================== Since CDL is mutually exclusive with NCQ priority (see ncq_prio_enable and sas_ncq_prio_enable in Documentation/ABI/testing/sysfs-block-device), CDL has to be explicitly enabled using: echo 1 > /sys/block/$bdev/device/cdl_enable Since the ioprio hints are supplied through the existing I/O priority API, it should be simple for an application to make use of the ioprio hints. It simply has to reuse one of the new macros defined in include/uapi/linux/ioprio.h: IOPRIO_PRIO_HINT() or IOPRIO_PRIO_VALUE_HINT(), and supply one of the new hints defined in include/uapi/linux/ioprio.h: IOPRIO_HINT_DEV_DURATION_LIMIT_[1-7], which indicates that the I/O should use the corresponding CDL DLD index 1-7. By reusing the I/O priority API, the user can both define a DLD to use per AIO (io_uring sqe->ioprio or libaio iocb->aio_reqprio) or per-thread (ioprio_set()). ======= Testing ======= With the following fio patches (authored by Damien): https://github.com/floatious/fio/commits/cdl-v4 fio adds support for ioprio hints, such that CDL can be tested using e.g.: fio --ioengine=io_uring --cmdprio_percentage=10 --cmdprio_hint=DLD_index A simple way to test is to use a DLD with a very short duration limit, and send large reads. Regardless of the CDL policy, in case of a CDL timeout, the I/O will result in a -ETIME error to user-space. We also provide a CDL test suite located in the cdl-tools repo, see: https://github.com/westerndigitalcorporation/cdl-tools/blob/cdl-v4/README.md#testing-a-system-command-duration-limits-support We have tested this patch series using: -real hardware -the following QEMU implementation: https://github.com/floatious/qemu/tree/cdl (NOTE: the QEMU implementation requires you to define the CDL policy at compile time, so you currently need to recompile QEMU when switching between policies.) =================== Further information =================== For further information about CDL, see Damien's slides: Presented at SDC 2021: https://www.snia.org/sites/default/files/SDC/2021/pdfs/SNIA-SDC21-LeMoal-Be-On-Time-command-duration-limits-Feature-Support-in%20Linux.pdf Presented at Lund Linux Con 2022: https://drive.google.com/file/d/1I6ChFc0h4JY9qZdO1bY5oCAdYCSZVqWw/view?usp=sharing ================ Changes since V3 ================ -Changed user-facing API, instead of introducing a new ioprio class, introduce new ioprio hints. -Dropped sysfs API for reading the DLDs. We can introduce a new block level (sysfs) API later on (instead of exposing an API that is tied to ATA/SCSI). -Picked up Reviewed-by tags from Hannes and Bart. -Improved commit message for patch "block: introduce BLK_STS_DURATION_LIMIT" (thanks Bart). -Patch "scsi: sd: set read/write commands CDL index" is now split into two patches: "scsi: allow enabling and disabling command duration limits" and "scsi: sd: set read/write commands CDL index". -The cdl_enable sysfs attribute is now defined in scsi_sysfs.c instead of sd.c. CDL is defined in SPC-6, so the feature is not really unique to disks. For older change logs, see previous patch series versions: https://lore.kernel.org/linux-scsi/20230124190308.127318-1-niklas.cassel@xxxxxxx/ https://lore.kernel.org/linux-scsi/20230112140412.667308-1-niklas.cassel@xxxxxxx/ https://lore.kernel.org/linux-scsi/20221208105947.2399894-1-niklas.cassel@xxxxxxx/ Kind regards, Niklas & Damien Damien Le Moal (13): ioprio: cleanup interface definition block: introduce ioprio hints block: introduce BLK_STS_DURATION_LIMIT scsi: support retrieving sub-pages of mode pages scsi: support service action in scsi_report_opcode() scsi: detect support for command duration limits scsi: allow enabling and disabling command duration limits scsi: sd: set read/write commands CDL index ata: libata: detect support for command duration limits ata: libata-scsi: handle CDL bits in ata_scsiop_maint_in() ata: libata-scsi: add support for CDL pages mode sense ata: libata: add ATA feature control sub-page translation ata: libata: set read/write commands CDL index Niklas Cassel (6): scsi: core: allow libata to complete successful commands via EH scsi: rename and move get_scsi_ml_byte() scsi: sd: handle read/write CDL timeout failures ata: libata-scsi: remove unnecessary !cmd checks ata: libata: change ata_eh_request_sense() to not set CHECK_CONDITION ata: libata: handle completion of CDL commands using policy 0xD Documentation/ABI/testing/sysfs-block-device | 22 ++ block/bfq-iosched.c | 8 +- block/blk-core.c | 3 + block/ioprio.c | 6 +- drivers/ata/libata-core.c | 214 ++++++++++- drivers/ata/libata-eh.c | 130 ++++++- drivers/ata/libata-sata.c | 103 ++++- drivers/ata/libata-scsi.c | 371 +++++++++++++++---- drivers/ata/libata.h | 2 +- drivers/scsi/scsi.c | 171 ++++++++- drivers/scsi/scsi_error.c | 48 ++- drivers/scsi/scsi_lib.c | 15 +- drivers/scsi/scsi_priv.h | 6 + drivers/scsi/scsi_scan.c | 3 + drivers/scsi/scsi_sysfs.c | 33 ++ drivers/scsi/scsi_transport_sas.c | 2 +- drivers/scsi/sd.c | 59 ++- drivers/scsi/sr.c | 2 +- include/linux/ata.h | 11 +- include/linux/blk_types.h | 6 + include/linux/libata.h | 42 ++- include/scsi/scsi_cmnd.h | 5 + include/scsi/scsi_device.h | 18 +- include/uapi/linux/ioprio.h | 68 +++- 24 files changed, 1195 insertions(+), 153 deletions(-) -- 2.39.2
