Re: [PATCH v3 01/18] block: introduce duration-limits priority class

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 1/25/23 05:36, Bart Van Assche wrote:
> On 1/24/23 11:27, Bart Van Assche wrote:
>> Implementing duration limit support using the I/O priority mechanism 
>> makes it impossible to configure the I/O priority for commands that have 
>> a duration limit. Shouldn't the duration limit be independent of the I/O 
>> priority? Am I perhaps missing something?
> 
> (replying to my own e-mail)
> 
> In SAM-6 I found the following: "The device server may use the duration 
> expiration time to determine the order of processing commands with
> the SIMPLE task attribute within the task set. A difference in duration 
> expiration time between commands may override other scheduling 
> considerations (e.g., different times to access different logical block 
> addresses or vendor specific scheduling considerations). Processing of a 
> collection of commands with different command duration limit settings 
> should cause a command with an earlier duration expiration time to 
> complete with status sooner than a command with a later duration 
> expiration time."
> 
> Do I understand correctly that it is optional for a SCSI device to 
> interpret the command duration as a priority and that this is not mandatory?

This describes the expected behavior from the drive in terms of command
execution ordering when CDL is used. The text is a little "soft" and sound
as if this behavior is optional because CDL is a combination of time
limits AND a policy for each time limit. The policy of a CDL indicates
what the drive behavior should be if a command misses its time limit. In
short, there are 2 policies:
1) best-effort: the time limit is a hint of sorts. If the drive fails to
execute the command before the limit expires, the command is not aborted
and execution continues.
2) fast-fail: If the drive fails to execute the command before the time
limit expires, the command must be completed with an error immediately.

And CDL also has a field, settable by the user, that describes an allowed
performance degradation to achieve CDL scheduling in time. That is, most
important for the best-effort case to indicate how "serious" the user is
about the CDL limit "hint".

So as you can see I think, the SAM-6 text is vague because of the many
possible variations in scheduling policies that need to be implemented by
a drive.

-- 
Damien Le Moal
Western Digital Research




[Index of Archives]     [Linux RAID]     [Linux SCSI]     [Linux ATA RAID]     [IDE]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Device Mapper]

  Powered by Linux