From: Damien Le Moal <damien.lemoal@xxxxxxxxxxxxxxxxxx>
The REPORT_SUPPORTED_OPERATION_CODES command allows checking for support
of commands that have the same opcode but different service actions,
such as READ 32 and WRITE 32. However, the current implementation of
scsi_report_opcode() only allows checking an operation code without a
service action differentiation.
Add the "sa" argument to scsi_report_opcode() to allow passing a service
action. If a non-zero service action is specified, the reporting
options field value is set to 3 to have the service action field taken
into account by the device. If no service action field is specified
(zero), the reporting options field is set to 1 as before.
Signed-off-by: Damien Le Moal <damien.lemoal@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Niklas Cassel <niklas.cassel@xxxxxxx>
---
drivers/scsi/scsi.c | 28 +++++++++++++++++++---------
drivers/scsi/sd.c | 10 +++++-----
include/scsi/scsi_device.h | 3 ++-
3 files changed, 26 insertions(+), 15 deletions(-)
diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index 1426b9b03612..e69a5dd5abd2 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -494,18 +494,22 @@ void scsi_attach_vpd(struct scsi_device *sdev)
}
/**
- * scsi_report_opcode - Find out if a given command opcode is supported
+ * scsi_report_opcode - Find out if a given command is supported
* @sdev: scsi device to query
* @buffer: scratch buffer (must be at least 20 bytes long)
* @len: length of buffer
- * @opcode: opcode for command to look up
- *
- * Uses the REPORT SUPPORTED OPERATION CODES to look up the given
- * opcode. Returns -EINVAL if RSOC fails, 0 if the command opcode is
- * unsupported and 1 if the device claims to support the command.
+ * @opcode: opcode for the command to look up
+ * @sa: service action for the command to look up
+ *
+ * Uses the REPORT SUPPORTED OPERATION CODES to check support for the
+ * command identified with @opcode and @sa. If the command does not
+ * have a service action, @sa must be 0. Returns -EINVAL if RSOC fails,
+ * 0 if the command is not supported and 1 if the device claims to
+ * support the command.
*/
int scsi_report_opcode(struct scsi_device *sdev, unsigned char *buffer,
- unsigned int len, unsigned char opcode)
+ unsigned int len, unsigned char opcode,
+ unsigned short sa)
{
unsigned char cmd[16];
struct scsi_sense_hdr sshdr;
@@ -526,8 +530,14 @@ int scsi_report_opcode(struct scsi_device *sdev, unsigned char *buffer,
memset(cmd, 0, 16);
cmd[0] = MAINTENANCE_IN;
cmd[1] = MI_REPORT_SUPPORTED_OPERATION_CODES;
- cmd[2] = 1; /* One command format */
- cmd[3] = opcode;
+ if (!sa) {
+ cmd[2] = 1; /* One command format */
+ cmd[3] = opcode;
+ } else {
+ cmd[2] = 3; /* One command format with service action */
+ cmd[3] = opcode;
+ put_unaligned_be16(sa, &cmd[4]);
+ }
put_unaligned_be32(request_len, &cmd[6]);
memset(buffer, 0, len);
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 77259716ca75..2b56ff4fcf8a 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -3038,7 +3038,7 @@ static void sd_read_write_same(struct scsi_disk *sdkp, unsigned char *buffer)
return;
}
- if (scsi_report_opcode(sdev, buffer, SD_BUF_SIZE, INQUIRY) < 0) {
+ if (scsi_report_opcode(sdev, buffer, SD_BUF_SIZE, INQUIRY, 0) < 0) {
struct scsi_vpd *vpd;
sdev->no_report_opcodes = 1;
@@ -3054,10 +3054,10 @@ static void sd_read_write_same(struct scsi_disk *sdkp, unsigned char *buffer)
rcu_read_unlock();
}
- if (scsi_report_opcode(sdev, buffer, SD_BUF_SIZE, WRITE_SAME_16) == 1)
+ if (scsi_report_opcode(sdev, buffer, SD_BUF_SIZE, WRITE_SAME_16, 0) == 1)
sdkp->ws16 = 1;
- if (scsi_report_opcode(sdev, buffer, SD_BUF_SIZE, WRITE_SAME) == 1)
+ if (scsi_report_opcode(sdev, buffer, SD_BUF_SIZE, WRITE_SAME, 0) == 1)
sdkp->ws10 = 1;
}
@@ -3069,9 +3069,9 @@ static void sd_read_security(struct scsi_disk *sdkp, unsigned char *buffer)
return;
if (scsi_report_opcode(sdev, buffer, SD_BUF_SIZE,
- SECURITY_PROTOCOL_IN) == 1 &&
+ SECURITY_PROTOCOL_IN, 0) == 1 &&
scsi_report_opcode(sdev, buffer, SD_BUF_SIZE,
- SECURITY_PROTOCOL_OUT) == 1)
+ SECURITY_PROTOCOL_OUT, 0) == 1)
sdkp->security = 1;
}
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index a499cdac2ce8..f6d1d9890839 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -433,7 +433,8 @@ extern int scsi_test_unit_ready(struct scsi_device *sdev, int timeout,
extern int scsi_get_vpd_page(struct scsi_device *, u8 page, unsigned char *buf,
int buf_len);
extern int scsi_report_opcode(struct scsi_device *sdev, unsigned char *buffer,
- unsigned int len, unsigned char opcode);
+ unsigned int len, unsigned char opcode,
+ unsigned short sa);
extern int scsi_device_set_state(struct scsi_device *sdev,
enum scsi_device_state state);
extern struct scsi_event *sdev_evt_alloc(enum scsi_device_event evt_type,
--
2.39.0
