Re: [PATCH 3/3] mmc: block: Requeue on block size restrictions

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 26/10/22 10:30, Christian Löhle wrote:
> The block layer does not conform to all our sector count restrictions, so
> requeue in case we had to modify the number of blocks sent instead of
> going through the normal completion.
> 
> Note that the normal completion used before does not lead to a bug,
> this change is just the nicer thing to do.

Can you elaborate on why it is "nicer"?

> An example of such a restriction is max_blk_count = 1 and 512 blksz,
> but the block layer continues to use requests of size PAGE_SIZE.
> 
> Signed-off-by: Christian Loehle <cloehle@xxxxxxxxxxxxxx>
> ---
>  drivers/mmc/core/block.c | 12 +++++++++---
>  1 file changed, 9 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c
> index 54cd009aee50..c434d3964880 100644
> --- a/drivers/mmc/core/block.c
> +++ b/drivers/mmc/core/block.c
> @@ -1519,8 +1519,10 @@ static void mmc_blk_cqe_req_done(struct mmc_request *mrq)
>  	/*
>  	 * Block layer timeouts race with completions which means the normal
>  	 * completion path cannot be used during recovery.
> +	 * Also do not use it if we had to modify the block count to satisfy
> +	 * host controller needs.
>  	 */
> -	if (mq->in_recovery)
> +	if (mq->in_recovery || mrq->data->blocks != blk_rq_sectors(req))
>  		mmc_blk_cqe_complete_rq(mq, req);
>  	else if (likely(!blk_should_fake_timeout(req->q)))
>  		blk_mq_complete_request(req);
> @@ -2051,8 +2053,10 @@ static void mmc_blk_hsq_req_done(struct mmc_request *mrq)
>  	/*
>  	 * Block layer timeouts race with completions which means the normal
>  	 * completion path cannot be used during recovery.
> +	 * Also do not use it if we had to modify the block count to satisfy
> +	 * host controller needs.
>  	 */
> -	if (mq->in_recovery)
> +	if (mq->in_recovery || mrq->data->blocks != blk_rq_sectors(req))
>  		mmc_blk_cqe_complete_rq(mq, req);
>  	else if (likely(!blk_should_fake_timeout(req->q)))
>  		blk_mq_complete_request(req);
> @@ -2115,8 +2119,10 @@ static void mmc_blk_mq_post_req(struct mmc_queue *mq, struct request *req,
>  	/*
>  	 * Block layer timeouts race with completions which means the normal
>  	 * completion path cannot be used during recovery.
> +	 * Also do not use it if we had to modify the block count to satisfy
> +	 * host controller needs.
>  	 */
> -	if (mq->in_recovery) {
> +	if (mq->in_recovery || mrq->data->blocks != blk_rq_sectors(req)) {
>  		mmc_blk_mq_complete_rq(mq, req);
>  	} else if (likely(!blk_should_fake_timeout(req->q))) {
>  		if (can_sleep)




[Index of Archives]     [Linux RAID]     [Linux SCSI]     [Linux ATA RAID]     [IDE]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Device Mapper]

  Powered by Linux