These patches cleanup and improve libata support for ATA devices supporting the FUA feature. The first patch modifies the block layer to prevent the use of REQ_FUA with read requests. This is necessary as the block layer code expect REQ_FUA to be used with write requests (the flush machinery cannot enforce access to the media for FUA read commands) and FUA is not supported with ATA devices when NCQ is not enabled (device queue depth set to 1). Patch 2 and 3 are libata cleanup preparatory patches. Patch 4 cleans up the detection for FUA support. Patch 5 fixes building a taskfile for FUA write requests. Patch 6 prevents the use of FUA with known bad drives. Finally, patch 7 enables FUA support by default in libata for devices supporting this features. Changes from v5: - Removed WARN for FUA reads in patch 5. - Added reviewed-by tags. Changes from v4: - Changed patch 1 to the one suggested by Christoph. - Added Hannes review tag. Changes from v3: - Added patch 1 to prevent any block device user from issuing a REQ_FUA read. - Changed patch 5 to remove the check for REQ_FUA read and also remove support for ATA_CMD_WRITE_MULTI_FUA_EXT as this command is obsolete in recent ACS specifications. Changes from v2: - Added patch 1 and 2 as preparatory patches - Added patch 4 to fix FUA writes handling for the non-ncq case. Note that it is possible that the drives blacklisted in patch 5 are actually OK since the code back in 2012 had the issue with the wrong use of LBA 28 commands for FUA writes. Changes from v1: - Removed Maciej's patch 2. Instead, blacklist drives which are known to have a buggy FUA support. Christoph Hellwig (1): block: add a sanity check for non-write flush/fua bios Damien Le Moal (6): ata: libata: Introduce ata_ncq_supported() ata: libata: Rename and cleanup ata_rwcmd_protocol() ata: libata: cleanup fua support detection ata: libata: Fix FUA handling in ata_build_rw_tf() ata: libata: blacklist FUA support for known buggy drives ata: libata: Enable fua support by default .../admin-guide/kernel-parameters.txt | 3 + block/blk-core.c | 13 ++-- drivers/ata/libata-core.c | 73 ++++++++++++++----- drivers/ata/libata-scsi.c | 30 +------- include/linux/libata.h | 34 ++++++--- 5 files changed, 92 insertions(+), 61 deletions(-) -- 2.38.1
