Re: [PATCH 1/1] virtio_pci: use common helper to configure SR-IOV

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 10/13/2022 12:20 AM, Bjorn Helgaas wrote:
On Wed, Oct 12, 2022 at 5:01 AM Max Gurtovoy <mgurtovoy@xxxxxxxxxx> wrote:

On 10/12/2022 11:42 AM, Max Gurtovoy wrote:
On 10/12/2022 8:02 AM, Michael S. Tsirkin wrote:
On Thu, Sep 29, 2022 at 02:40:08AM +0300, Max Gurtovoy wrote:
This is instead of re-writing the same logic in virtio driver.

Signed-off-by: Max Gurtovoy <mgurtovoy@xxxxxxxxxx>
Dropped this as it caused build failures:

https://lore.kernel.org/r/202210080424.gSmuYfb0-lkp%40intel.com
maybe you can re-run it with:

diff --git a/drivers/virtio/Makefile b/drivers/virtio/Makefile
index 8e98d24917cc..b383326a20e2 100644
--- a/drivers/virtio/Makefile
+++ b/drivers/virtio/Makefile
@@ -5,10 +5,11 @@ obj-$(CONFIG_VIRTIO_PCI_LIB) += virtio_pci_modern_dev.o
  obj-$(CONFIG_VIRTIO_PCI_LIB_LEGACY) += virtio_pci_legacy_dev.o
  obj-$(CONFIG_VIRTIO_MMIO) += virtio_mmio.o
  obj-$(CONFIG_VIRTIO_PCI) += virtio_pci.o
-virtio_pci-y := virtio_pci_modern.o virtio_pci_common.o
-virtio_pci-$(CONFIG_VIRTIO_PCI_LEGACY) += virtio_pci_legacy.o
  obj-$(CONFIG_VIRTIO_BALLOON) += virtio_balloon.o
  obj-$(CONFIG_VIRTIO_INPUT) += virtio_input.o
  obj-$(CONFIG_VIRTIO_VDPA) += virtio_vdpa.o
  obj-$(CONFIG_VIRTIO_MEM) += virtio_mem.o
  obj-$(CONFIG_VIRTIO_DMA_SHARED_BUFFER) += virtio_dma_buf.o
+
+virtio_pci-$(CONFIG_VIRTIO_PCI) := virtio_pci_modern.o
virtio_pci_common.o
+virtio_pci-$(CONFIG_VIRTIO_PCI_LEGACY) += virtio_pci_legacy.o

Now I saw that CONFIG_PCI_IOV is not set in the error log so the bellow
should fix it:

diff --git a/include/linux/pci.h b/include/linux/pci.h
index 060af91bafcd..c519220e8ff8 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -2228,7 +2228,10 @@ static inline int pci_sriov_set_totalvfs(struct
pci_dev *dev, u16 numvfs)
   { return 0; }
   static inline int pci_sriov_get_totalvfs(struct pci_dev *dev)
   { return 0; }
-#define pci_sriov_configure_simple     NULL
+static inline int pci_sriov_configure_simple(struct pci_dev *dev, int
nr_virtfn)
+{
+       return -ENOSYS;
+}
   static inline resource_size_t pci_iov_resource_size(struct pci_dev
*dev, int resno)
   { return 0; }
   static inline void pci_vf_drivers_autoprobe(struct pci_dev *dev, bool
probe) { }

Bjorn,

WDYT about the above ?

should I send it to the pci subsystem list ?
Yes.  I don't apply things that haven't appeared on linux-pci@xxxxxxxxxxxxxxx.

Sure.

MST,

can you confirm the above fixes the build errors before I sent the v2 ?





[Index of Archives]     [Linux RAID]     [Linux SCSI]     [Linux ATA RAID]     [IDE]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Device Mapper]

  Powered by Linux