[PATCH v2] blktests: replace module removal with patient module removal

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



A long time ago, in a galaxy far, far away...

I ran into some odd scsi_debug false positives with fstests. This
prompted me to look into them given these false positives prevents
me from moving forward with establishing a test baseline with high
number of cycles. That is, this stupid issue was prevening creating
high confidence in testing.

I reported it [0] and exchanged some ideas with Doug. However, in
the end, despite efforts to help things with scsi_debug there were
still issues lingering which seemed to defy our expectations upstream.
One of the last hanging fruit issues is and always has been that
userspace expectations for proper module removal has been broken,
so in the end I have demonstrated this is a generic issue [1].

Long ago a WAIT option for module removal was added... that was then
removed as it was deemed not needed as folks couldn't figure out when
these races happened. The races are actually pretty easy to trigger, it
was just never properly documented. A simpe blkdev_open() will easily
bump a module refcnt, and these days many thing scan do that sort of
thing.

The proper solution is to implement then a patient module removal
on kmod and patches have been sent for that and those patches are
under review. In the meantime we need a work around to open code a
similar solution for users of old versions of kmod. I sent an open
coded solution for fstests about since August 19th and has been used
there for a few months now. Now that that stuff is merged and tested
in fstests with more exposure, its time to match parity on blktests.

I've tested blktests with this for things which I can run virtually
for a while now. More wider testig is welcomed.

[0] https://bugzilla.kernel.org/show_bug.cgi?id=212337
[1] https://bugzilla.kernel.org/show_bug.cgi?id=214015

Signed-off-by: Luis Chamberlain <mcgrof@xxxxxxxxxx>
Reviewed-by: Chaitanya Kulkarni <kch@xxxxxxxxxx>
---

This v2:

Goes tested with a series of fixes for nvme and srp. It also goes
tested against shellcheck. The biggest change is to adapt the patient
rmmod check support into a helper has_modprobe_patient(). The other
bigger change is to ensure we use nvme_loop when using the patient
removal as the directory we use to for the recfct *is* case sensitive,
we can't use aliases.

I've tested this with as many things I could now and I can't find
any regressions. For those curious my baseline for v5.17-rc can be
found here:

https://github.com/mcgrof/kdevops/blob/master/workflows/blktests/expunges/5.17-rc7/failures.txt

 common/multipath-over-rdma |  11 +--
 common/null_blk            |   9 ++-
 common/rc                  | 153 ++++++++++++++++++++++++++++++++++---
 common/scsi_debug          |   9 ++-
 tests/nvme/rc              |  12 +--
 tests/nvmeof-mp/rc         |  15 ++--
 tests/srp/rc               |  19 ++---
 7 files changed, 176 insertions(+), 52 deletions(-)

diff --git a/common/multipath-over-rdma b/common/multipath-over-rdma
index cef05ec92d29..a7821c7469f5 100644
--- a/common/multipath-over-rdma
+++ b/common/multipath-over-rdma
@@ -4,6 +4,7 @@
 #
 # Functions and global variables used by both the srp and nvmeof-mp tests.
 
+. common/rc
 . common/shellcheck
 . common/null_blk
 
@@ -427,14 +428,8 @@ stop_soft_rdma() {
 		      echo "$i ..."
 		      rdma link del "${i}" || echo "Failed to remove ${i}"
 		done
-	if ! unload_module rdma_rxe 10; then
-		echo "Unloading rdma_rxe failed"
-		return 1
-	fi
-	if ! unload_module siw 10; then
-		echo "Unloading siw failed"
-		return 1
-	fi
+	_patient_rmmod rdma_rxe || return 1
+	_patient_rmmod siw  || return 1
 	} >>"$FULL"
 }
 
diff --git a/common/null_blk b/common/null_blk
index 6611db03a00e..6c816579c0b8 100644
--- a/common/null_blk
+++ b/common/null_blk
@@ -4,6 +4,8 @@
 #
 # null_blk helper functions.
 
+. common/rc
+
 _have_null_blk() {
 	_have_modules null_blk
 }
@@ -21,9 +23,8 @@ _init_null_blk() {
 	local zoned=""
 	if (( RUN_FOR_ZONED )); then zoned="zoned=1"; fi
 
-	if ! modprobe -r null_blk || ! modprobe null_blk "$@" "${zoned}" ; then
-		return 1
-	fi
+	_patient_rmmod null_blk || return 1
+	modprobe null_blk "$@" "${zoned}" || 1
 
 	udevadm settle
 	return 0
@@ -46,5 +47,5 @@ _configure_null_blk() {
 _exit_null_blk() {
 	_remove_null_blk_devices
 	udevadm settle
-	modprobe -r null_blk
+	_patient_rmmod null_blk
 }
diff --git a/common/rc b/common/rc
index 0528ce808256..67bba70eb019 100644
--- a/common/rc
+++ b/common/rc
@@ -321,15 +321,148 @@ _uptime_s() {
 	awk '{ print int($1) }' /proc/uptime
 }
 
-# Arguments: module to unload ($1) and retry count ($2).
-unload_module() {
-	local i m=$1 rc=${2:-1}
-
-	[ ! -e "/sys/module/$m" ] && return 0
-	for ((i=rc;i>0;i--)); do
-		modprobe -r "$m"
-		[ ! -e "/sys/module/$m" ] && return 0
-		sleep .1
+_has_modprobe_patient()
+{
+	modprobe --help >& /dev/null || return 1
+	modprobe --help | grep -q -1 "remove-patiently" || return 1
+	return 0
+}
+
+# Set MODPROBE_PATIENT_RM_TIMEOUT_SECONDS to "forever" if you want the patient
+# modprobe removal to run forever trying to remove a module.
+MODPROBE_REMOVE_PATIENT=""
+if ! _has_modprobe_patient; then
+	if [[ -z "$MODPROBE_PATIENT_RM_TIMEOUT_SECONDS" ]]; then
+		# We will open code our own implementation of patient module
+		# remover in blktests. Use a 50 second default.
+		export MODPROBE_PATIENT_RM_TIMEOUT_SECONDS="50"
+	fi
+else
+	MODPROBE_RM_PATIENT_TIMEOUT_ARGS=""
+	if [[ -n "$MODPROBE_PATIENT_RM_TIMEOUT_SECONDS" ]]; then
+		if [[ "$MODPROBE_PATIENT_RM_TIMEOUT_SECONDS" != "forever" ]]; then
+			MODPROBE_PATIENT_RM_TIMEOUT_MS="$((MODPROBE_PATIENT_RM_TIMEOUT_SECONDS * 1000))"
+			MODPROBE_RM_PATIENT_TIMEOUT_ARGS="-t $MODPROBE_PATIENT_RM_TIMEOUT_MS"
+		fi
+	else
+		# We export MODPROBE_PATIENT_RM_TIMEOUT_SECONDS here for parity
+		# with environments without support for modprobe -p, but we
+		# only really need it exported right now for environments which
+		# don't have support for modprobe -p to implement our own
+		# patient module removal support within fstests.
+		export MODPROBE_PATIENT_RM_TIMEOUT_SECONDS="50"
+		MODPROBE_PATIENT_RM_TIMEOUT_MS="$((MODPROBE_PATIENT_RM_TIMEOUT_SECONDS * 1000))"
+		MODPROBE_RM_PATIENT_TIMEOUT_ARGS="-t $MODPROBE_PATIENT_RM_TIMEOUT_MS"
+	fi
+	MODPROBE_REMOVE_PATIENT="modprobe -p $MODPROBE_RM_PATIENT_TIMEOUT_ARGS"
+fi
+export MODPROBE_REMOVE_PATIENT
+
+# checks the refcount and returns 0 if we can safely remove the module. rmmod
+# does this check for us, but we can use this to also iterate checking for this
+# refcount before we even try to remove the module. This is useful when using
+# debug test modules which take a while to quiesce.
+_patient_rmmod_check_refcnt()
+{
+	local module=$1
+	local refcnt=0
+
+	if [[ -f "/sys/module/$module/refcnt" ]]; then
+		refcnt=$(cat "/sys/module/$module/refcnt" 2>/dev/null)
+		if [[ $? -ne 0 || $refcnt -eq 0 ]]; then
+			return 0
+		fi
+		return 1
+	fi
+	return 0
+}
+
+# Tries to wait patiently to remove a module by ensuring first
+# the refcnt is 0 and then trying to remove the module over and over
+# again within the time allowed. The timeout is configurable per test, just set
+# MODPROBE_PATIENT_RM_TIMEOUT_SECONDS prior to including this file.
+# If you want this to try forever just set MODPROBE_PATIENT_RM_TIMEOUT_SECONDS
+# to the special value of "forever". This applies to both cases where kmod
+# supports the patient module remover (modrobe -p) and where it does not.
+#
+# If your version of kmod supports modprobe -p, we instead use that
+# instead. Otherwise we have to implement a patient module remover
+# ourselves.
+_patient_rmmod()
+{
+	local module=$1
+	local max_tries_max=$MODPROBE_PATIENT_RM_TIMEOUT_SECONDS
+	local max_tries=0
+	local mod_ret=0
+	local refcnt_is_zero=0
+
+	if [[ -n $MODPROBE_REMOVE_PATIENT ]]; then
+		$MODPROBE_REMOVE_PATIENT "$module"
+		mod_ret=$?
+		if [[ $mod_ret -ne 0 ]]; then
+			echo "kmod patient module removal for $module timed out waiting for refcnt to become 0 using timeout of $max_tries_max returned $mod_ret"
+		fi
+		return $mod_ret
+	fi
+
+	max_tries=$max_tries_max
+
+	# We must use a string check as otherwise if max_tries is set to
+	# "forever" and we don't use a string check we can end up skipping
+	# entering this loop.
+	while [[ "$max_tries" != "0" ]]; do
+		if _patient_rmmod_check_refcnt "$module"; then
+			refcnt_is_zero=1
+			break
+		fi
+		sleep 1
+		if [[ "$max_tries" == "forever" ]]; then
+			continue
+		fi
+		((max_tries--))
 	done
-	return 1
+
+	if [[ $refcnt_is_zero -ne 1 ]]; then
+		echo "custom patient module removal for $module timed out waiting for refcnt to become 0 using timeout of $max_tries_max"
+		return 1
+	fi
+
+	# If we ran out of time but our refcnt check confirms we had
+	# a refcnt of 0, just try to remove the module once.
+	if [[ "$max_tries" == "0" ]]; then
+		modprobe -r "$module"
+		return $?
+	fi
+
+	# If we have extra time left. Use the time left to now try to
+	# persistently remove the module. We do this because although through
+	# the above we found refcnt to be 0, removal can still fail since
+	# userspace can always race to bump the refcnt. An example is any
+	# blkdev_open() calls against a block device. These issues have been
+	# tracked and documented in the following bug reports, which justifies
+	# our need to do this in userspace:
+	# https://bugzilla.kernel.org/show_bug.cgi?id=212337
+	# https://bugzilla.kernel.org/show_bug.cgi?id=214015
+	while [[ $max_tries != 0 ]]; do
+		if [[ -d /sys/module/$module ]]; then
+			modprobe -r "$module" 2> /dev/null
+			mod_ret=$?
+			if [[ $mod_ret == 0 ]]; then
+				break;
+			fi
+			sleep 1
+			if [[ "$max_tries" == "forever" ]]; then
+				continue
+			fi
+			((max_tries--))
+		else
+			break
+		fi
+	done
+
+	if [[ $mod_ret -ne 0 ]]; then
+		echo "custom patient module removal for $module timed out trying to remove $module using timeout of $max_tries_max last try returned $mod_ret"
+	fi
+
+	return $mod_ret
 }
diff --git a/common/scsi_debug b/common/scsi_debug
index b48cdc9e2b4d..9987286086bf 100644
--- a/common/scsi_debug
+++ b/common/scsi_debug
@@ -4,14 +4,15 @@
 #
 # scsi_debug helper functions.
 
+. common/rc
+
 _have_scsi_debug() {
 	_have_modules scsi_debug
 }
 
 _init_scsi_debug() {
-	if ! modprobe -r scsi_debug || ! modprobe scsi_debug "$@"; then
-		return 1
-	fi
+	_patient_rmmod scsi_debug || return 1
+	modprobe scsi_debug "$@" || return 1
 
 	udevadm settle
 
@@ -51,5 +52,5 @@ _exit_scsi_debug() {
 	unset SCSI_DEBUG_TARGETS
 	unset SCSI_DEBUG_DEVICES
 	udevadm settle
-	modprobe -r scsi_debug
+	_patient_rmmod scsi_debug
 }
diff --git a/tests/nvme/rc b/tests/nvme/rc
index 3c38408a0bfe..c124401228d7 100644
--- a/tests/nvme/rc
+++ b/tests/nvme/rc
@@ -125,11 +125,13 @@ _cleanup_nvmet() {
 	shopt -u nullglob
 	trap SIGINT
 
-	modprobe -r nvme-"${nvme_trtype}" 2>/dev/null
-	if [[ "${nvme_trtype}" != "loop" ]]; then
-		modprobe -r nvmet-"${nvme_trtype}" 2>/dev/null
-	fi
-	modprobe -r nvmet 2>/dev/null
+	if [[ "${nvme_trtype}" == "loop" ]]; then
+		_patient_rmmod nvme_"${nvme_trtype}"
+        else
+                _patient_rmmod nvme-"${nvme_trtype}"
+                _patient_rmmod nvmet-"${nvme_trtype}"
+        fi
+	_patient_rmmod nvmet 2>/dev/null
 	if [[ "${nvme_trtype}" == "rdma" ]]; then
 		stop_soft_rdma
 	fi
diff --git a/tests/nvmeof-mp/rc b/tests/nvmeof-mp/rc
index dcb2e3c71093..54d8c95d05c4 100755
--- a/tests/nvmeof-mp/rc
+++ b/tests/nvmeof-mp/rc
@@ -164,12 +164,13 @@ start_nvme_client() {
 }
 
 stop_nvme_client() {
-	unload_module nvme-rdma || return $?
-	unload_module nvme-fabrics || return $?
+	_patient_rmmod nvme-rdma || return 1
+	_patient_rmmod nvme-fabrics || return 1
 	# Ignore nvme and nvme-core unload errors - this test may be run on a
 	# system equipped with one or more NVMe SSDs.
-	unload_module nvme >&/dev/null
-	unload_module nvme-core >&/dev/null
+	export MODPROBE_PATIENT_RM_TIMEOUT_SECONDS=5
+	_patient_rmmod nvme
+	_patient_rmmod nvme-core
 	return 0
 }
 
@@ -269,9 +270,9 @@ stop_nvme_target() {
 				rmdir "$d"
 			done
 	)
-	unload_module nvmet_rdma &&
-		unload_module nvmet &&
-		_exit_null_blk
+	_patient_rmmod nvmet_rdma || return 1
+	_patient_rmmod nvmet || return 1
+	_exit_null_blk
 }
 
 start_target() {
diff --git a/tests/srp/rc b/tests/srp/rc
index d44082af39de..fd5dd099106a 100755
--- a/tests/srp/rc
+++ b/tests/srp/rc
@@ -323,19 +323,10 @@ start_srp_ini() {
 
 # Unload the SRP initiator driver.
 stop_srp_ini() {
-	local i
-
 	log_out
-	for ((i=40;i>=0;i--)); do
-		remove_mpath_devs || return $?
-		unload_module ib_srp >/dev/null 2>&1 && break
-		sleep 1
-	done
-	if [ -e /sys/module/ib_srp ]; then
-		echo "Error: unloading kernel module ib_srp failed"
-		return 1
-	fi
-	unload_module scsi_transport_srp || return $?
+	remove_mpath_devs || return $?
+	_patient_rmmod ib_srp || return 1
+	_patient_rmmod scsi_transport_srp || return $?
 }
 
 # Associate the LIO device with name $1/$2 with file $3 and SCSI serial $4.
@@ -494,7 +485,7 @@ start_lio_srpt() {
 	if modinfo ib_srpt | grep -q '^parm:[[:blank:]]*rdma_cm_port:'; then
 		opts+=("rdma_cm_port=${srp_rdma_cm_port}")
 	fi
-	unload_module ib_srpt
+	_patient_rmmod ib_srpt
 	modprobe ib_srpt "${opts[@]}" || return $?
 	i=0
 	for r in "${vdev_path[@]}"; do
@@ -556,7 +547,7 @@ stop_lio_srpt() {
 			 target_core_file target_core_stgt target_core_user \
 			 target_core_mod
 	do
-		unload_module $m 10 || return $?
+		_patient_rmmod $m || return $?
 	done
 }
 
-- 
2.35.1




[Index of Archives]     [Linux RAID]     [Linux SCSI]     [Linux ATA RAID]     [IDE]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Device Mapper]

  Powered by Linux